S45S58 Semiconductor Low Noise Single OP AMP Description The S45S58 is a monolithic Integrated Circuit designed for Single operational amplifier. Features • • • • • • Power consumption as small as about 50mW (typ.) Built-in output short-circuit protecting circuit. Internal phase consumption type. No latch-up Wide same phase mode and differential voltage ranges High gain. low noise Applications • Active filters • Audio amplifiers • VCOs • Other electronic circuits Ordering Information Type NO. Marking S45S58 458 Package Code SOT-25 Outline Dimensions unit : mm 2.1 BSC 1.25 BSC 5 4 0.1~0.25 3 0~0.1 0.9±0.1 0.15~0.30 2 2.0 BSC Block Diagram 1.30 BSC 1 0.25 Min. KSI-2014-000 1 S45S58 Absolute maximum ratings Characteristic Symbol Ratings Unit Supply voltage VCC 36 or ± 18 V Differential input voltage VIND 30 V Input voltage VIN ±15 V Power Dissipation PD 300 mW Operating temperature Topr -45 ~ +85 °C Storage temperature Tstg -55 ~ +150 °C Electrical Characteristics (Unless otherwise specified. VCC = +15V, VEE=-15V and Ta = 25 °C ) Characteristic Symbol Input offset voltage VIOS Input offset current IIOS Input bias current Test Condition Rg ≤10 ㏀ Min. Typ. Max. Unit - 0.5 6 mV - - 5 200 nA IIB - - 60 500 nA Input common mode Voltage Range VICR - ±12 ±14 - V ±14 VOM RL≥10 ㏀ ±12 Maximum Output Voltage - V RL≥2 ㏀ ±10 ±13 - V Vout=±10V, RL≥2 ㏀ 86 100 - dB Large signal Voltage Gain GV Common mode rejection ratio CMRR Rg ≤10 ㏀ 70 90 - dB Power supply rejection ratio PSRR Rg ≤10 ㏀ - 30 150 uV/V GV=1, RL≥2 ㏀ - 1.0 - V/us - 4.0 6.0 mA - 2.5 - uVrms Slew Rate SR Supply Current ICC Equivalent input noise voltage VNI Source Current Sink Current RIAA, RS =1 ㏀, f=30 ㎐~30 ㎑ ISOURCE - 27 - - mA ISINK - 27 - - mA KSI-2014-000 2 S45S58 Electrical Characteristic Curves Fig. 1 GV - f Fig. 3 IIB - Ta Fig. 5 VOP-P - RL Fig. 2 VOP-P - f Fig. 4 VOM - VCC, VEE Fig. 6 VNI - f KSI-2014-000 3