VISHAY SE10PD

New Product
SE10Pb thru SE10PJ
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
FEATURES
eSMP ® Series
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop
• Typical IR less than 0.1 μA
• ESD capability
• Meets MSL level 1, per
LF maximum peak of 260 °C
DO-220AA (SMP)
J-STD-020,
• AEC-Q101 qualified
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
100 V to 600 V
IR
5 μA
VF at IF = 1.0 A
0.86 V
TJ max.
175 °C
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
TYPICAL APPLICATIONS
General purpose, polarity protection, and rail-to-rail
protection in both consumer and automotive applications.
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SE10PB
SE10PD
SE10PG
SE10PJ
10B
10D
10G
10J
100
200
400
600
UNIT
V
Maximum repetitive peak reverse voltage
VRRM
Average forward current
IF(AV)
1.0
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
25
A
TJ, TSTG
- 55 to + 175
°C
Operating junction and storage temperature range
Document Number: 89024
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE10Pb thru SE10PJ
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage
IF = 1.0 A
Maximum reverse current
Rated VR
SYMBOL
TA = 25 °C
VF (1)
TA = 125 °C
TA = 25 °C
MAX.
0.960
1.05
0.860
0.95
-
5.0
4.8
50
UNIT
V
IR (2)
TA = 125 °C
TYP.
μA
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
780
-
ns
Typical junction capacitance
4.0 V, 1 MHz
CJ
7.0
-
pF
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
RJA
Typical thermal resistance
SE10PB
SE10PD
(1)
SE10PG
UNIT
132
RJL (1)
15
(1)
30
RJC
SE10PJ
°C/W
Note
Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. RJL - is
measured at the terminal of cathode band. RJC is measured at the top center of the body.
(1)
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
CLASS
VALUE
AEC-Q101-001
Human body model (contact mode)
TEST TYPE
C = 100 pF, R = 1.5 
H3B
> 8 kV
AEC-Q101-002
Machine model (contact mode)
C = 200 pF, R = 0 
M4
> 400 kV
JESD22-A114
Human body model (contact mode)
C = 150 pF, R = 1.5 
3B
> 8 kV
C
> 400 kV
C = 150 pF, R = 150 
4
> 8 kV
C = 150 pF, R = 150 
4
> 15 kV
JESD22-A114
TEST CONDITIONS
C = 200 pF, R = 0 
Machine model (contact mode)
Human body model (contact mode)
IEC 61000-4-2 (2)
SYMBOL
Human body model (air-discharge mode)
(1)
VC
Notes
(1) Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV
(2) System ESD standard
ORDERING INFORMATION (Example)
PREFERRED P/N
SE10PJ-M3/84A
SE10PJ-M3/85A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.024
84A
3000
7" diameter plastic tape and reel
10 000
13" diameter plastic tape and reel
0.024
85A
(1)
0.024
84A
3000
7" diameter plastic tape and reel
SE10PJHM3/85A (1)
0.024
85A
10 000
13" diameter plastic tape and reel
SE10PJHM3/84A
Note
Automotive grade
(1)
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 89024
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE10Pb thru SE10PJ
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
100
Instantaneous Reverse Current (µA)
1.2
Average Forward Current (A)
Resistive or Inductive Load
1.0
0.8
0.6
0.4
TL Measured
at the Cathode Band Terminal
0.2
TJ = 150 °C
1
0.1
TJ = 25 °C
0.01
0
0
25
50
75
100
125
150
10
175
20
30
40
50
60
70
80
90
100
Lead Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Instantaneous Forward Characteristics
100
1.2
D = 0.5
1.0
D = 0.3
D = 0.2
0.8
D = 1.0
D = 0.1
0.6
T
0.4
0.2
D = tp/T
0.2
0.4
0.6
10
1
tp
0
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.8
Junction Capacitance (pF)
Average Power Loss (W)
TJ = 175 °C
10
0.8
1.0
1.2
0.1
0.1
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Instantaneous Forward Characteristics
Instantaneous Forward Current (A)
10
TJ = 175 °C
TJ = 150 °C
1
TJ = 25 °C
0.1
0.5
0.7
0.9
1.1
1.3
1.5
Instantaneous Forward Voltage (V)
Fig. 3 - Forward Power Loss Characteristics
Document Number: 89024
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE10Pb thru SE10PJ
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.158 (4.00)
0.146 (3.70)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
www.vishay.com
4
0.025 0.030
(0.635) (0.762)
0.100
(2.54)
0.050
(1.27)
For technical questions within your region, please contact one of the following:
Document Number: 89024
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1