ETC SM8958AC25

SyncMOS Technologies Inc.
SM8958A
September 2002
8 - Bit Micro-controller
with 32KB flash & 1KB RAM embedded
Features
Product List
SM8958AL25, 25MHz 32KB internal flash MCU
SM8958AC25, 25MHz 32KB internal flash MCU
SM8958AC40, 40MHz 32KB internal flash MCU
Description
The SM8958A series product is an 8 - bit single chip micro
controller with 32KB on-chip flash and 1K byte RAM
embedded. It is a derivative of the 8052 micro controller
family. It has 5-channel SPWM build-in. User can access
on-chip expanded RAM with easier and faster way by its
‘bank mapping direct addressing mode’ scheme. With its
hardware features and powerful instruction set, it’s
straight forward to make it a versatile and cost effective
controller for those applications which demand up to 32 I/
O pins for PDIP package or up to 36
I/O pins for PLCC/QFP package, or applications which
need up to 32K byte flash memory for program data.
To program the on-chip flash memory, a commercial writer
is available to do it in parallel programming method.
Ordering Information
yywwv
SM8958Aihhk
yy: year, ww:week
v: version identifier {, A, B,...}
i: process identifier {L=3.0V ~ 3.6V, C=4.5V ~ 5.5V}
hh: working clock in MHz {25, 40}
k: package type postfix {as below table}
v: version identifier
Postfix
P
J
Q
Package
40L PDIP
44L PLCC
44L QFP
Pin/Pad
Configuration
page 2
page 2
page 2
Working voltage: 3.0V ~ 3.6V For L Version
4.5V ~ 5.5V For C Version
General 8052 family compatible
12 clocks per machine cycle
32K byte on chip program flash
1024 byte on-chip data RAM
Three 16 bit Timers/Counters
One Watch Dog Timer
Four 8-bit I/O ports for PDIP package
Four 8-bit I/O ports + one 4-bit I/O ports for PLCC or QFP package
Full duplex serial channel
Bit operation instruction
Page free jumps
8-bit Unsigned Division
8-bit Unsigned Multiply
BCD arithmetic
Direct Addressing
Indirect Addressing
Nested Interrupt
Two priority level interrupt
A serial I/O port
Power save modes: Idle mode and Power down mode
Code protection function
Low EMI (inhibit ALE)
Bank mapping direct addressing mode for access on-chip RAM
5 channel SPWM function with P1.3 ~ P1.7
Dimension
page 21
page 22
page 23
Taiwan
4F, No. 1 Creation Road 1,
Science-based Industrial Park,
Hsinchu, Taiwan 30077
TEL: 886-3-578-3344
886-3-579-2988
FAX: 886-3-579-2960
886-3-578-0493
Web site: http://www.syncmos.com.tw
Specifications subject to change without notice,contact your sales representatives for the most recent information.
1/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
3
36
P0.7/AD7
SPWM4/P1.7
#EA
P4.1
RES
RXD/P3.0
P4.3
TXD/P3.1
#INT0/P3.2
#INT1/P3.3
T0/P3.4
T1/P3.5
4
35
T2/P1.0
1
40
VDD
T2EX/P1.1
2
39
P0.0/AD0
P1.2
3
38
P0.1/AD1
37
P0.2/AD2
36
35
P0.3/AD3
P0.4/AD4
34
P0.5/AD5
33
P0.6/AD6
SPWM0/P1.3
4
SPWM2/P1.5
6
SPWM3/P1.6
7
SPWM4/P1.7
8
RES
9
RXD/P3.0
10
(Top View)
5
SM8958A ihhP
40L PDIP
SPWM1/P1.4
32
P0.7/AD7
31
#EA
30
ALE
29
#PSEN
28
P2.7/A15
27
P2.6/A14
TXD/P3.1
11
#INT0/P3.2
12
#INT1/P3.3
13
T0/P3.4
14
T1/P3.5
15
26
P2.5/A13
16
25
P2.4/A12
P2.3/A11
#WR/P3.6
17
24
XTAL2
18
23
P2.2/A10
XTAL1
19
22
P2.1/A9
VSS
20
21
P2.0/A8
#RD/P3.7
P0.1/AD1
P0.0/AD0
P4.2
VDD
P1.1/T2EX
P1.0/T2
P1.3/SPWM0
P1.2
P0.2/AD2
P0.3/AD3
31
SM8958A
ihhQ
44L QFP
5
6
7
8
30
29
28
27
26
(Top View)
9
25
10
24
11
23
P0.4/AD4
P0.5/AD5
P0.6/AD6
P0.7/AD7
#EA
P4.1
ALE
#PSEN
P2.7/A15
P2.6/A14
P2.5/A13
P2.4/A12
P2.3/A11
12 13 14 15 16 17 18 19 20 21 22
P2.1/A9
P2.5/A13
31
32
P2.2/A10
29
32
44 43 42 41 40 39 38 37 36 35 34
33
P4.0
P2.3/A11
30
ALE
#PSEN
P2.7/A15
P2.6/A14
P2.4/A12
P2.1/A9
P1.4/SPWM1
P0.3/AD3
P0.2/AD2
P1.1/T2EX
P1.0/T2
P4.2
VDD
P0.0/AD0
P0.1/AD1
P2.2/A10
SPWM3/P1.6
37
P0.5/AD5
P0.6/AD6
33
14
(Top View)
15
16
17
18 19 20 21 22 23 24 25 26 27 28
P4.0
38
1
2
34
44L PLCC
13
SPWM2/P1.5
P2.0/A8
12
P0.4/AD4
VSS
11
39
#RD/P3.7
XTAL2
XTAL1
10
#WR/P3.6
T1/P3.5
SM8958A
ihhJ
9
P2.0/A8
TXD/P3.1
#INT0/P3.2
#INT1/P3.3
T0/P3.4
8
#RD/P3.7
XTAL2
XTAL1
VSS
RXD/P3.0
P4.3
1 44 43 42 41 40
3 2
4
5
7
#WR/P3.6
6
SPWM2/P1.5
SPWM3/P1.6
SPWM4/P1.7
RES
P1.3/SPWM0
P1.2
P1.4/SPWM1
Pin Configurations
Specifications subject to change without notice,contact your sales representatives for the most recent information.
2/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Block Diagram
Timer 1
Timer 2
Timer 0
Decoder &
Register
Stack
Pointer
1024 bytes
RAM
Buffer
WDT
RES
Vdd
Vss
to pertinent blocks
Reset
Circuit
DPTR
Acc
PC
Incrementer
to whole chip
Power
Circuit
Buffer2
to pertinent blocks
Interrupt
Circuit
Buffer1
Program
Counter
ALU
Register
PSW
XTAL2
XTAL1
#EA
Timing
to whole system
Generator
ALE
7FFFH
#PSEN
Instruction
Register
32K
bytes
Port 0
Latch
SPWM
Port 1
Latch
Port 2
Latch
Port 3
Latch
Flash
Port 4
Latch
5
Memory
2
0000H
Port 0
Driver & Mux
8
Port 1
Driver & Mux
8
Port 2
Driver & Mux
Port 3
Driver & Mux
8
8
Port 4
Driver & Mux
4
Specifications subject to change without notice,contact your sales representatives for the most recent information.
3/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Pin Descriptions
40L 44L 44L
PDIP QFP PLCC
Pin# Pin# Pin#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
40
41
42
43
44
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
18
19
20
21
22
23
24
25
26
27
29
30
31
32
33
34
35
36
37
38
17
28
39
6
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
19
20
21
22
24
25
26
27
28
29
30
31
32
33
35
36
37
38
39
40
41
42
43
44
23
34
1
12
Symbol
T2/P1.0
T2EX/P1.1
P1.2
SPWM0/P1.3
SPWM1/P1.4
SPWM2/P1.5
SPWM3/P1.6
SPWM4/P1.7
RES
RXD/P3.0
TXD/P3.1
#INT0/P3.2
#INT1/P3.3
T0/P3.4
T1/P3.5
#WR/P3.6
#RD/P3.7
XTAL2
XTAL1
VSS
P2.0/A8
P2.1/A9
P2.2/A10
P2.3/A11
P2.4/A12
P2.5/A13
P2.6/A14
P2.7/A15
#PSEN
ALE
#EA
P0.7/AD7
P0.6/AD6
P0.5/AD5
P0.4/AD4
P0.3/AD3
P0.2/AD2
P0.1/AD1
P0.0/AD0
VDD
P4.0
P4.1
P4.2
P4.3
Active I/O
H
L/ L/ -
L
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
o
i
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
o
o
i
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
i/o
Names
timer 2 clock out & bit 0 of port 1
timer 2 control & bit 1 of port 1
bit 2 of port 1
SPWM channel 0, bit 3 of port 1
SPWM channel 1, bit 4 of port 1
SPWM channel 2, bit 5 of port 1
SPWM channel 3, bit 6 of port 1
SPWM channel 4, bit 7 of port 1
Reset
Receive data & bit 0 of port 3
Transmit data & bit 1 of port 3
low true interrupt 0 & bit 2 of port 3
low true interrupt 1 & bit 3 of port 3
Timer 0 & bit 4 of port 3
Timer 1 & bit 5 of port 3
ext. memory write & bit 6 of port 3
ext. mem. read & bit 7 of port 3
Crystal out
Crystal in
Sink Voltage, Ground
bit 0 of port 2 & bit 8 of ext. memory address
bit 1 of port 2 & bit 9 of ext. memory address
bit 2 of port 2 & bit 10 of ext. memory address
bit 3 of port 2 & bit 11 of ext. memory address
bit 4 of port 2 & bit 12 of ext. memory address
bit 5 of port 2 & bit 13 of ext. memory address
bit 6 of port 2 & bit 14 of ext. memory address
bit 7 of port 2 & bit 15 of ext. memory address
program storage enable
address latch enable
external access & VPP
bit 7 of port 0 & data/address bit 7 of ext. memory
bit 6 of port 0 & data/address bit 6 of ext. memory
bit 5 of port 0 & data/address bit 5 of ext. memory
bit 4 of port 0 & data/address bit 4 of ext. memory
bit 3 of port 0 & data/address bit 3 of ext. memory
bit 2 of port 0 & data/address bit 2 of ext. memory
bit 1 of port 0 & data/address bit 1 of ext. memory
bit 0 of port 0 & data/address bit 0 of ext. memory
Drive Voltage, +5 Vcc
bit 0 of Port 4
bit 1 of Port 4
bit 2 of Port 4
bit 3 of Port 4
Specifications subject to change without notice,contact your sales representatives for the most recent information.
4/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Special Function Register (SFR)
The address $80 to $FF can be accessed by direct addressing mode only.
Address $80 to $FF is SFR area.
The following table lists the SFRs which are identical to general 8052, as well as SM8958A Extension SFRs.
Special Function Register (SFR) Memory Map
$FF
$F8
$F0
B
$F7
ACC
$EF
$E7
P4
$DF
PSW
$D7
$CF
$E8
$E0
$D8
$D0
$C8
$C0
T2CON
T2MOD
RCAP2L
RCAP2H
TL2
TH2
$B8
IP
SCONF
$B0
P3
$A8
$A0
$98
P2
SCON
$90
P1
$88
TCON
TMOD
TL0
TL1
TH0
TH1
$80
P0
SP
DPL
DPH
(Reserved)
RCON
$C7
$BF
$B7
IE
SPWMD4
SPWMC
SBUF
SPWMD0
SPWMD1
SPWMD2
P1CON
WDTC
$AF
$A7
$9F
WDTKEY
$97
SPWMD3
$8F
DBANK
PCON
$87
Note: The text of SFRs with bold type characters are Extension Special Function Registers for SM8958A
Addr
SFR
Reset
7
85H
RCON
******00
86H
DBANK
0***0001
97H
WDTKEY
********
9BH
P1CON
00000***
SPWME4
WDTE
6
5
4
BSE
3
2
BS3
BS2
SPWME3
SPWME2
SPWME1
WDTC
0*0**000
SPWMC
******00
A4H
SPWMD0
00H
SPWMD04 SPWMD03 SPWMD02 SPWMD01 SPWMD00
A5H
SPWMD1
00H
SPWMD14 SPWMD13 SPWMD12 SPWMD11 SPWMD10
A6H
SPWMD2
00H
A7H
SPWMD3
00H
ACH
SPWMD4
00H
BFH
SCONF
0*****00
WDR
TF2
T2CON
00H
T2MOD
******00
D8H
P4
****1111
RAMS1
RAMS0
BS1
BS0
SPWME0
9FH
C9H
0
WDTKEY7 WDTKEY6 WDTKEY5 WDTKEY4 WDTKEY3 WDTKEY2 WDTKEY1 WDTKEY0
A3H
C8H
1
CLEAR
PS1
PS0
SPFS1
SPFS0
BRM02
BRM01
BRM00
BRM12
BRM11
BRM10
SPWMD24 SPWMD23 SPWMD22 SPWMD21 SPWMD20
BRM22
BRM21
BRM20
SPWMD34 SPWMD33 SPWMD32 SPWMD31 SPWMD30
BRM32
BRM31
BRM30
SPWMD44 SPWMD43 SPWMD42 SPWMD41 SPWMD40
BRM42
BRM41
BRM40
OME
ALEI
EXF2
PS2
RCLK
TCLK
EXEN2
P4.3
TR2
P4.2
C/T2
CP/RL2
T2OE
DCEN
P4.1
P4.0
Specifications subject to change without notice,contact your sales representatives for the most recent information.
5/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Extension Function Description
1. Memory Structure
The SM8958A is the general 8052 hardware core as a single chip micro controller. Its memory structure follows general 8052
structure.
1.1 Program Memory
The SM8958A has 32K byte on-chip flash memory which used as general program memory. The address range for the 32K
byte is $0000 to $7FFF.
7FFF
32K Program
memory space
0000
Note: The single flash block address structure for doing as well as program ROM flash.
1.2 Data Memory
The SM8958A has 1K bytes on-chip RAM, 256 bytes of it are the same as general 8052 internal memory structure while the
expanded 768 bytes on-chip RAM can be accessed by external memory addressing method (by instruction MOVX), or by
‘Bank mapping direct addressing mode’ as described in next page.
02FF
Expanded 768 bytes RAM
(Accessed by direct external
addressing mode, by instruction
MOVX, or by Bank mapping
direct addressing mode)
FF
FF Higher 128 bytes (Access by
80 indirect addressing mode only)
7F
SFR (Accessed by direct
addressing mode only)
Lower 128 bytes (Accessed by
( OME = 1 )
80
direct & indirect addressing mode)
00
0000
On-chip expanded RAM address structure.
Specifications subject to change without notice,contact your sales representatives for the most recent information.
6/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
1.2.1 Data Memory - Lower 128 byte ($00 to $7F, Bank 0 & Bank 1)
Data Memory $00 to $FF is the same as 8052.
The address $00 to $7F can be accessed by direct and indirect addressing modes.
Address $00 to $1F is register area.
Address $20 to $2F is memory bit area.
Address $30 to $7F is for general memory area.
1.2.2 Data Memory - Higher 128 byte ($80 to $FF, Bank 2 & Bank 3)
The address $80 to $FF can be accessed by indirect addressing mode or by bank mapping direct addressing mode.
Address $80 to $FF is data area.
1.2.3 Data Memory - Expanded 768bytes ($0000 to $02FF, Bank 4 ~ Bank 15)
From external address $0000 to $02FF is the on-chip expanded RAM area, total 768 bytes. This area can be accessed by
external direct addressing mode (by instruction MOVX) or by bank mapping direct addressing mode as described below:
1.3 Bank mapping direct addressing mode:
We provide RAM bank address ‘40H~7FH’ as mapping window which allow user access all the 1KB on-chip RAM through
this RAM bank address.
That means using direct addressing mode can access all the 1KB on-chip RAM. Please see next page for the mapping
mode table.
Specifications subject to change without notice,contact your sales representatives for the most recent information.
7/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
BS3
BS2
BS1
BS0
040h~07fh mapping address
Note
0
0
0
0
000h~03fh
lower 128 byte RAM
0
0
0
1
040h~07fh
lower 128 byte RAM
0
0
1
0
080h~0bfh
higher 128 byte RAM
0
0
1
1
0c0h~0ffh
higher 128 byte RAM
0
1
0
0
0000h~003fh
on-chip expanded 768 byte RAM
0
1
0
1
0040h~007fh
“
0
1
1
0
0080h~00bfh
“
0
1
1
1
00c0h~00ffh
“
1
0
0
0
0100h~013fh
“
1
0
0
1
0140h~017fh
“
1
0
1
0
0180h~01bfh
“
1
0
1
1
01c0h~01ffh
“
1
1
0
0
0200h~023fh
“
1
1
0
1
0240h~027fh
“
1
1
1
0
0280h~02bfh
“
1
1
1
1
02c0h~02ffh
“
With this bank mapping scheme, user can access entire 1K byte on-chip RAM with direct addressing method. That means
using the window area ($040~$07F), user can access any bank (64 byte) data of 1K byte on-chip RAM space which is
selected by BS[3:0] of data bank control register (DBANK, $86).
For example, user write #30h to $101 address:
MOV DBANK, #88H
; set bank mapping $040~$07f to $0100~$013f
MOV A, # 30H
; store #30H to A
MOV 41H, A
; write #30H to $0101 address
Specifications subject to change without notice,contact your sales representatives for the most recent information.
8/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Data Bank Control Register (DBANK, $86)
bit-7
Read :
Write :
Reset value :
bit-0
BSE
Unused
Unused
Unused
BS3
BS2
BS1
BS0
0
*
*
*
0
0
0
1
Data bank select enable bit BSE = 1 enables the data bank select function
Data bank select enable bit BSE = 0 disables the data bank select function
BS[3:0] setting will map $040~$07F RAM space to entire 1K byte on-chip RAM space.
Internal RAM Control Register (RCON, $85)
bit-7
Read :
Write :
bit-0
Unused
Unused
Unused
Unused
Unused
Unused
RAMS1
RAMS0
*
*
*
*
*
*
0
0
Reset value :
SM8958A has 768 byte on-chip RAM which can be accessed by external memory addressing method only. (By
instruction MOVX). The address space of instruction MOVX @Rn is determined by bit 1 and bit 0 (RAMS1,
RAMS0) of RCON. The default setting of RAMS1, RAMS0 bits is 00 (page0).
RAMS1
RAMS0
MOVX @Ri i=0,1 mapping to expended RAM address
0
0
$0000 ~ $00FF
0
1
$0100 ~ $01FF
1
0
$0200 ~ $02FF
The port 0, port2, port3.6 and port3.7 can be used as general purpose I/O pin while port0 is open-drain structure.
System Control Register (SCONF, $BF)
bit-7
Read :
Write :
Reset value :
bit-0
WDR
Unused
Unused
Unused
Unused
Unused
OME
ALEI
0
*
*
*
*
*
0
0
WDR : Watch Dog Timer Reset. When system reset by Watch Dog Timer overflow. WDR will be set to 1, The bit 7 (WDR)
of SCONF is Watch Dog Timer Reset bit. It will be set to 1 when reset signal generated by WDT overflow. User
should check WDR bit whenever un-predicted reset happened.
Specifications subject to change without notice,contact your sales representatives for the most recent information.
9/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
OME : 768 bytes on-chip RAM enable bit. The bit 0 (OME) of SCONF can enable or disable the on-chip expanded 768
byte RAM. The default setting of OME bit is 0 (disable).
ALEI : ALE output inhibit bit, to reduce EMI. Setting bit 0 (ALEI) of SCONF can inhibit the clock signal in Fosc/6Hz output
to the ALE pin.
1.4 I/O Pin Configuration
The ports 1, 2 and 3 of standard 8051 have internal pull-up resistor, and port 0 has open-drain outputs. Each I/O pin can
be used independently as an input or an output. For I/O ports to be used as an input pin, the port bit latch must contain a
‘1’ which turns off the output driver FET. Then for port 1, 2 and 3 port pin is pulled high by a weak internal pull-up, and can
be pulled low by an external source. The port 0 has open-drain outputs which means its pull-ups are not active during normal port operation. Writing ‘1’ to the port 0 bit latch will causing bit floating so that it can be used as a high-impedance
input.
The port 4 used as GPIO will has the same function as port 1, 2 and 3.
output
data
pin
port 0
standard 8051
port 1, 2 and 3
standard 8051
output
data
input
data
pin
input
data
2. Port 4 for PLCC or QFP package :
The bit addressable port 4 is available with PLCC or QFP package. The port 4 has only 4 pins and its port address is located
at 0D8H. The function of port 4 is the same as the function of port 1, port 2 and port 3.
Port4 (P4, $D8)
bit-7
Read :
Write :
Reset value :
bit-0
Unused
Unused
Unused
Unused
P4.3
P4.2
P4.1
P4.0
*
*
*
*
1
1
1
1
The bit 3, bit 2, bit 1, bit 0 output the setting to pin P4.3, P4.2, P4.1, P4.0 respectively.
Specifications subject to change without notice,contact your sales representatives for the most recent information.
10/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
3.Watch Dog Timer
The Watch Dog Timer (WDT) is a 16-bit free-running counter that generate reset signal if the counter overflows. The WDT is
useful for systems which are susceptible to noise, power glitches, or electronics discharge which causing software dead
loop or runaway. The WDT function can help user software recover from abnormal software condition. The WDT is different
from Timer0, Timer1 and Timer2 of general 8052. To prevent a WDT reset can be done by software periodically clearing the
WDT counter. User should check WDR bit of SCONF register whenever un-predicted reset happened
The purpose of the secure procedure is to prevent the WDTC value from being changed when system runaway.
There is a 250KHz RC oscillator embedded in chip. Set WDTE = “1” will enable the RC oscillator and the frequency is independent to the system frequency.
To enable the WDT is done by setting 1 to the bit 7 (WDTE) of WDTC. After WDTE set to 1, the 16-bit counter starts to count
with the RC oscillator. It will generate a reset signal when overflows. The WDTE bit will be cleared to 0 automatically when
SM8958A been reset, either hardware reset or WDT reset.
To reset the WDT is done by setting 1 to the CLEAR bit of WDTC before the counter overflow. This will clear the content of
the 16-bit counter and let the counter re-start to count from the beginning.
3.1 Watch Dog Timer Registers:
Watch Dog Timer Registers - WDT Control Register (WDTC, $9F)
bit-7
Read :
Write :
Reset value :
bit-0
WDTE
Unused
CLEAR
Unused
Unused
PS2
PS1
PS0
0
*
0
*
*
0
0
0
WDTE : Watch Dog Timer enable bit
CLEAR : Watch Dog Timer reset bit
PS[2:0] : Overflow period select bits
PS [2:0]
Overflow Period (ms)
000
2.048
001
4.096
010
8.192
011
16.384
100
32.768
101
65.536
110
131.072
111
262.144
Specifications subject to change without notice,contact your sales representatives for the most recent information.
11/25
Ver 1.0 PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Watch Dog Key Register - (WDTKEY, $97H)
bit-7
bit-0
Read :
WDT
WDT
WDT
WDT
WDT
WDT
WDT
WDT
Write :
KEY7
KEY6
KEY5
KEY4
KEY3
KEY2
KEY1
KEY0
*
*
*
*
*
*
*
*
Reset value :
By default, the WDTC is read only. User need to write values 1EH, E1H sequentially to the WDTKEY($97H) register to
enable the WDTC write attribute, That is
MOV WDTKEY, # 1EH
MOV WDTKEY, # E1H
When WDTC is set, user need to write another values E1H, 1EH sequentially to the WDTKEY($97H) register to disable the
WDTC write attribute, That is
MOV WDTKEY, # E1H
MOV WDTKEY, # 1EH
Watch Dog Timer Register - System Control Register (SCONF, $BF)
bit-7
Read :
Write :
Reset value :
bit-0
WDR
Unused
Unused
Unused
Unused
Unused
OME
ALEI
0
*
*
*
*
*
0
0
The bit 7 (WDR) of SCONF is Watch Dog TImer Reset bit. It will be set to 1 when reset signal generated by WDT
overflow. User should check WDR bit whenever un-predicted reset happened
4. Reduce EMI Function
The SM8958A allows user to reduce the EMI emission by setting 1 to the bit 0 (ALEI) of SCONF register. This function will
inhibit the clock signal in Fosc/6Hz output to the ALE pin.
5. Specific Pulse Width Modulation (SPWM)
The Specific Pulse Width Modulation (SPWM) module contain 1 kind of PWM sub module: SPWM (Specific PWM). SPWM
has five 8-bit channels.
5.1 SPWM Function Description:
The 8-bit SPWM channel is composed of an 8-bit register which contains a 5-bit SPWM in MSB portion and a 3-bit binary
rate multiplier (BRM) in LSB portion. The value programmed in the 5-bit SPWM portion will determine the pulse length of
the output. The 3-bit BRM portion will generate and insert certain narrow pulses among an 8-SPWM-cycle frame. The number of pulses generated is equal to the number programmed in the 3-bit BRM portion. The usage of the BRM is to generate
equivalent 8-bit resolution SPWM type DAC with reasonably high repetition rate through 5-bit SPWM clock speed. The
SPFS[1:0] settings of SPWMC ($A3) register are dividend of Fosc to be SPWM clock, Fosc/2^(SPFS[1:0]+1). The SPWM
output cycle frame repetition rate (frequency) equals (SPWM clock)/32 which is [Fosc/2^(SPFS[1:0]+1)]/32.
Specifications subject to change without notice,contact your sales representatives for the most recent information.
12/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
5.2 SPWM Registers - P1CON, SPWMC, SPWMD[4:0]
SPWM Registers - Port1 Configuration Register (P1CON, $9B)
bit-7
Read:
Write:
bit-0
SPWME4
SPWME3
SPWME2
SPWME1
SPWME0
Unused
Unused
Unused
0
0
0
0
0
*
*
*
Reset value:
SPWME[4:0] : When the bit set to one, the corresponding SPWM pin is active as SPWM function. When the bit reset
to zero, the corresponding SPWM pin is active as I/O pin. Five bits are cleared upon reset.
SPWM Registers - SPWM Control Register (SPWMC, $A3)
bit-7
Read:
Write:
bit-0
Unused
Unused
Unused
Unused
Unused
Unused
SPFS1
SPFS0
*
*
*
*
*
*
0
0
Reset value:
SPFS[1:0] : These two bits is 2’s power parameter to form a frequency divider for input clock.
SPFS1
SPFS0
Divider
SPWM clock, Fosc=20MHz
SPWM clock, Fosc=24MHz
0
0
2
10MHz
12MHz
0
1
4
5MHz
6MHz
1
0
8
2.5MHz
3MHz
1
1
16
1.25MHz
1.5MHz
SPWM Registers - SPWM Data Register (SPWMD[4:0], $AC, $A7 ~$A4)
bit-7
Read:
Write:
Reset value:
bit-0
SPWMD
[4:0]4
SPWMD
[4:0]3
SPWMD
[4:0]2
SPWMD
[4:0]1
SPWMD
[4:0]0
BRM
[2:0]2
BRM
[2:0]1
BRM
[2:0]0
0
0
0
0
0
0
0
0
SPWMD[4:0] : content of SPWM Data Register. It determines duty cycle of SPWM output waveform.
BRM[2:0] : will insert certain narrow pulses among an 8-SPWM-cycle frame
Specifications subject to change without notice,contact your sales representatives for the most recent information.
13/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
N = BRM[2:0]
Number of SPWM cycles inserted in an 8-cycle frame
000
0
001
1
010
2
011
3
100
4
101
5
110
6
111
7
Example of SPWM timing diagram:
MOV SPWMC , #03H
MOV SPWMD0 , #83H
MOV P1CON , #08H
1st cycle frame
2nd cycle frame 3rd cycle frame
32T
16T
; Set output frequency (Divider = 16)
; SPWMD0[4:0]=10h (=16T high, 16T low), BRM[2:0] = 3
; Enable P1.3 as SPWM output pin
32T
16T
4th cycle frame 5th cycle frame
32T
16T
32T
6th cycle frame 7th cycle frame
32T
1T
1T
(narrow pulse inserted by BRM0[2:0] setting, here BRM0[2:0]=3)
32T
32T
16T
16T
16T
8th cycle frame
32T
16T
16T
1T
SPWM clock = 1 / T = Fosc / 2^(SPFS[1:0]+1)
The SPWM output cycle frame frequency = SPWM clock / 32 = [Fosc/2^(SPFS[1:0]+1)]/32
If user use Fosc=20MHz, SPFS[1:0] of SPWMC=#03H, then
SPWM clock = 20MHz/2^4 = 20MHz/16 = 1.25MHz
SPWM output cycle frame frequency = (20MHz/2^4)/32=39.1KHz
Specifications subject to change without notice,contact your sales representatives for the most recent information.
14/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Operating Conditions
Symbol
Typ.
Max.
Unit.
TA
Operating temperature
Description
Min.
0
25
70
oC
Remarks
TS
Storage temperature
-55
25
155
oC
VCC5
Supply voltage
4.5
5.0
5.5
V
For C Version
VCC3
Supply voltage
3
3.3
3.6
V
For L Version
Fosc 16
Oscillator Frequency
3.0
16
16
MHz For 5V, 3.3V application
Fosc 25
Oscillator Frequency
3.0
25
25
MHz For 5V, 3.3V application
Fosc 40
Oscillator Frequency
3.0
40
40
MHz For 5V application
Ambient temperature under bias
DC Characteristics
(16/25/40MHz, typical operating conditions, valid for SM8958A version series)
Symbol
Parameter
VIL1
VIL2
VIH1
VIH2
VOL1
VOL2
VOH1
Input Low Voltage
Input Low Voltage
Input High Voltage
Input High Voltage
Output Low Voltage
Output Low Voltage
Output High Voltage
port 0,1,2,3,4,#EA
RES, XTAL1
port 0,1,2,3,4,#EA
RES, XTAL1
port 0, ALE, #PSEN
port 1,2,3,4
port 0
VOH2
Output High Voltage
port 1,2,3,4,ALE,#PSEN
IIL
ITL
ILI
R RES
C IO
I CC
Logical 0 Input Current
Logical Transition Current
Input Leakage Current
Reset Pull-down Resistance
Pin Capacitance
Power Supply Current
Valid
port 1,2,3,4
port 1,2,3,4
port 0, #EA
RES
Min.
-0.5
0
2.0
70%Vcc
Max.
0.8
0.8
Vcc+0.5
Vcc+0.5
0.45
0.45
2.4
90%Vcc
2.4
90%Vcc
50
Vdd
Unit
V
V
V
V
V
V
V
V
V
V
uA
-75
uA
-650
+ 10
uA
300 Kohm
10
pF
15 mA
10
mA
7 mA
10 mA
mA
7
4.5
mA
10
uA
Test Conditions
IOL=3.2mA
IOL=1.6mA
IOH=-800uA (only for VCC =5V)
IOH=-80uA
IOH=-60uA (only for VCC =5 V)
IOH=-10uA
Vin=0.45V
Vin=2.0V
0.45V<Vin<Vcc
Freq=1MHz, Ta=25 C
Active mode, 40MHz
Active mode, 25MHz
Active mode, 16MHz
Idle mode, 40MHz
Idle mode, 25MHz
Idle mode, 16MHz
Power down mode
Specifications subject to change without notice,contact your sales representatives for the most recent information.
15/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
AC Characteristics
(16/25/40MHz, operating conditions; CL for Port 0, ALE and PSEN Outputs=100pF; CL for all Other Output=80pF)
Symbol
T LHLL
T AVLL
T LLAX
T LLIV
T LLPL
T PLPH
T PLIV
T PXIX
T PXIZ
T AVIV
T PLAZ
T RLRH
T WLWH
T RLDV
T RHDX
T RHDZ
T LLDV
T AVDV
T LLYL
T AVYL
T QVWH
T QVWX
T WHQX
T RLAZ
T YALH
T CHCL
T CLCX
T CLCH
T CHCX
T, TCLCL
Parameter
ALE pulse width
Address Valid to ALE low
Address Hold after ALE low
ALE low to Valid Instruction In
ALE low to #PSEN low
#PSEN pulse width
#PSEN low to Valid Instruction In
Instruction Hold after #PSEN
Instruction Float after #PSEN
Address to Valid Instruction In
#PSEN low to Address Float
#RD pulse width
#WR pulse width
#RD low to Valid Data In
Data Hold after #RD
Data Float after #RD
ALE low to Valid Data In
Address to Valid Data In
ALE low to #WR High or #RD low
Address Valid to #WR or #RD low
Data Valid to #WR High
Data Valid to #WR transition
Data hold after #WR
#RD low to Address Float
#WR or #RD high to ALE high
clock fall time
clock low time
clock rise time
clock high time
clock period
Valid
Cycle
RD/WRT
RD/WRT
RD/WRT
RD
RD
RD
RD
RD
RD
RD
RD
RD
WRT
RD
RD
RD
RD
RD
RD/WRT
RD/WRT
WRT
WRT
WRT
RD
RD/WRT
53
63
ICC Active mode test circuit
ICC
Vcc
fosc=16MHz
Min. Typ. Max
115
43
53
240
53
173
177
0
87
292
10
365
365
302
0
145
590
542
178
197
230
403
38
73
Variable fosc
Unit
Min.
Typ.
Max
2xT - 10
nS
T - 20
nS
T - 10
nS
4xT - 10 nS
T - 10
nS
3xT - 15
nS
3xT - 10 nS
0
nS
T + 25 nS
5xT - 20 nS
10 nS
6xT - 10
nS
6xT - 10
nS
5xT - 10 nS
0
nS
2xT + 20 nS
8xT - 10 nS
9xT - 20 nS
3xT - 10
3xT + 10 nS
4xT - 20
nS
7xT - 35
nS
T - 25
nS
T + 10
nS
5 nS
72
T -10
T + 10 nS
nS
nS
nS
nS
1/fosc
nS
ICC Idle mode test circuit
Vcc
ICC
VCC
RST
SM8958A
(NC)
Clock Signal
XTAL2
XTAL1
VSS
PO
EA
Remarks
VCC
RST
8
Vcc
PO
EA
8
SM8958A
(NC)
Clock Signal
XTAL2
XTAL1
VSS
Specifications subject to change without notice,contact your sales representatives for the most recent information.
16/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Application Reference
Valid for SM8958A
X'tal
C1
C2
R
3MHz
30 pF
30 pF
open
6MHz
30 pF
30 pF
open
9MHz
30 pF
30 pF
open
12MHz
30 pF
30 pF
open
X'tal
C1
C2
R
16MHz
30 pF
30 pF
open
25MHz
15 pF
15 pF
62KΩ
33MHz
5 pF
5 pF
6.8KΩ
40MHz
2 pF
2 pF
4.7KΩ
XI
X'tal
SM8958A
R
X2
C2
C1
NOTE: Oscillation circuit may differs with different crystal or ceramic
resonator in higher oscillation frequency which was due to each
crystal or ceramic resonator has its own characteristics.
User should check with the crystal or ceramic resonator manufacturer
for appropriate value of external components.
Data Memory Read Cycle Timing
T12
T1
T2
T3
T4
T5
T6
T8
T7
T9
T10
T11
T12
T1
T2
T3
OSC
1
2
ALE
#PSEN
#RD
5
7
3
PORT2
ADDRESS A15 - A8
3
PORT0
INST in Float
A7 - A0
4
Float
8
6
DATA in
Float
ADDRESS
or Float
Specifications subject to change without notice,contact your sales representatives for the most recent information.
17/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Program Memory Read Cycle Timing
T12
T2
T1
T3
T4
T5
T6
T10
T9
T8
T7
T11
T1
T12
T2
OSC
ALE
1
2
5
#PSEN
7
#RD,#WR
3
PORT2
ADDRESS A15 - A8
3
PORT0
Float
4
A7 - A0
ADDRESS A15 - A8
6
Float
8
Float
INST in
A7 - A0
Float
Float
INST in
Data Memory Write Cycle Timing
T12
T1
T2
T4
T3
T5
T6
T8
T7
T9
T10
T11
T12
T1
T2
T3
OSC
1
ALE
#PSEN
#WR
5
6
2
ADDRESS A15 - A8
PORT2
2
PORT0
INST
Float
4
3
ADDRESS
or Float
DATA OUT
A7 - A0
Specifications subject to change without notice,contact your sales representatives for the most recent information.
18/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
I/O Ports Timing
T6
T7
T10
T9
T8
X1
T1
T12
T11
T3
T2
T4
T5
T6
T7
T8
sampled
inputs P0,P1
sampled
inputs P2,P3
Output by
Mov Px,Src
current data
next data
RxD at Serial Port
Shift Clock
(Mode 0)
sampled
Timing Critical, Requirement of External Clock (Vss=0.0V is assumed)
TCLCL
Vdd-0.5V
70%Vdd
20%Vdd-0.1V
0.45V
Tm.I
TCLCX
TCHCL
TCHCX
TCLCH
External Program Memory Read Cycle
TPLPH
#PSEN
ALE
PORT 0
TLHLL
TLLPL
TAVLL
TLLAX
TPXIZ
TPLAZ
TPXIX
TPLIV
Instruction. IN
A0 - A7
A0 - A7
TAVIV
PORT 2
A8 - A15
A8 - A15
Specifications subject to change without notice,contact your sales representatives for the most recent information.
19/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Tm.II
External Data Memory Read Cycle
#PSEN
TYHLH
ALE
TLLDV
TRLRH
TLLYL
#RD
TAVLL
TLLAX
TRLAZ
TRHDZ
TRLDV
TRHDX
A0 - A7
from Ri or DPL
PORT 0
DATA IN
A0 - A7
from PCL
INSTRL
IN
TAVYL
TAVDV
PORT 2
A8 - A15 from PCH
P2.0 - P2.7 or A8 - A15 from DPH
Tm.III External Data Memory Write Cycle
#PSEN
TYHLH
TLHLL
ALE
TLLYL
#WR
TAVLL
TLLAX
PORT 0
TWLWH
TQVWX
TQVWH
A0-A7
from Ri or DPL
TWHQX
DATA OUT
A0-A7
From PCL
INSTRL
IN
TAVYL
PORT 2
A8-A15 from PCH
P2.0-P2.7 or A8-A15 from DPH
Specifications subject to change without notice,contact your sales representatives for the most recent information.
20/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
40L 600mil PDIP Information
E
D
S
E1
A2
A1
C
A
L
e1
B1
eA
B
a
Note:
1. Dimension D Max & include mold flash or tie bar
burrs.
2. Dimension E1 does not include inter lead flash.
3. Dimension D & E1 include mold mismatch and are
determined at the mold parting line.
4. Dimension B1 does not include dam bar protrusion/
infusion.
5. Controlling dimension is inch.
6. General appearance spec. should base on final visual
inspection spec.
Symbol
A
A1
A2
B
B1
C
D
E
E1
e1
L
a
eA
S
Dimension in inch
minimal/maximal
- / 0.210
0.010 / 0.150 / 0.160
0.016 / 0.022
0.048 / 0.054
0.008 / 0.014
- / 2.070
0.590 / 0.610
0.540 / 0.552
0.090 / 0.110
0.120 / 0.140
0 / 15
0.630 / 0.670
- / 0.090
Dimension in mm
minimal/maximal
- / 5.33
0.25 / 3.81 / 4.06
0.41 / 0.56
1.22 / 1.37
0.20 / 0.36
- / 52.58
14.99 / 15.49
13.72 / 14.02
2.29 / 2.79
3.05 / 3.56
0 / 15
16.00 / 17.02
- / 2.29
Specifications subject to change without notice,contact your sales representatives for the most recent information.
21/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
44L Plastic Chip Carrier (PLCC)
L
6
7
E
HE
GE
y
D
A2
HD
A
C
b1
θ
e
b
Symbol
A
A1
A2
b1
b
C
D
E
e
GD
GE
HD
HE
L
θ
GD
Note:
1. Dimension D & E does not include inter lead flash.
2. Dimension b1 does not include dam bar protrusion/
intrusion.
3. Controlling dimension: Inch
4. General appearance spec. should base on final visual
inspection spec.
A1
y
Dimension in inch
minimal/maximal
- / 0.185
0.020 / 0.145 / 0.155
0.026 / 0.032
0.016 / 0.022
0.008 / 0.014
0.648 / 0.658
0.648 / 0.658
0.050 BSC
0.590 / 0.630
0.590 / 0.630
0.680 / 0.700
0.680 / 0.700
0.090 / 0.110
- / 0.004
/
Dimension in mm
minimal/maximal
- / 4.70
0.51 / 3.68 / 3.94
0.66 / 0.81
0.41 / 0.56
0.20 / 0.36
16.46 / 16.71
16.46 / 16.71
1.27 BSC
14.99 / 16.00
14.99 / 16.00
17.27 / 17.78
17.27 / 17.78
2.29 / 2.79
- / 0.10
/
Specifications subject to change without notice,contact your sales representatives for the most recent information.
22/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
44L Plastic Quad Flat Package
C
L
L1
S
θ2
e
R1
D2 D1 D
Gage Plane
0.25 mm
b
θ3
A2
R2
A1
E2
E1
E
A
e1
seating plane
C
e
Note:
Dimension D1 and E1 do not include mold protrusion.
Allowance protrusion is 0.25mm per side.
Dimension D1 and E1 do include mold mismatch
and are determined datum plane.
Dimension b does not include dam bar protrusion.
Allowance dam bar protrusion shall be 0.08 mm total
in excess of the b dimension at maximum material
condition. Dam bar cannot be located on the lower
radius or the lead foot.
Symbol
A
A1
A2
b
c
D
D1
D2
E
E1
E2
e
L
L1
R1
R2
S
θ
θ1
θ2
θ3
C
Dimension in Inch
minimal/maximal
- / 0.100
0.006 / 0.014
0.071 / 0.087
0.012 / 0.018
0.004 / 0.009
0.520 BSC
0.394 BSC
0.315
0.520 BSC
0.394 BSC
0.315
0.031 BSC
0.029 / 0.041
0.063
0.005 / 0.005 / 0.012
0.008 / 0° / 7°
0° / 10° REF
7° REF
0.004
Dimension in mm
minimal/maximal
- / 2.55
0.15 / 0.35
1.80 / 2.20
0.30 / 0.45
0.09 / 0.20
13.20 BSC
10.00 BSC
8.00
13.20 BSC
10.00 BSC
8.00
0.80 BSC
0.73 / 1.03
1.60
0.13 / 0.13 / 0.30
0.20 / as left
as left
as left
as left
0.10
Specifications subject to change without notice,contact your sales representatives for the most recent information.
23/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
eMCU writer list
Company
Contact info
Tel:02-22182325
Fax:02-22182435
E-mail:
[email protected]
Programmer Model Number
LabTool - 48 (1 * 1)
LabTool - 848 (1*8)
Caprilion
P.O. Box 461 KaoHsiung, Taiwan,
ROC
Web site:
http://www.market.net.tw/ ~ cap/
Tel:07-3865061
Fax:07-3865421
E-mail:
[email protected]
UNIV2000
Hi-Lo
4F, No. 20, 22, LN, 76,
Rui Guang Rd., Nei Hu, Taipei,
Taiwan, ROC.
Web site:
http://www.hilosystems.com.tw
Tel:02-87923301
Fax:02-87923285
E-mail:
[email protected]
All - 11 (1*1)
Gang - 08 (1*8)
Leap
6th F1-4, Lane 609,
Chunghsin Rd., Sec. 5, Sanchung,
Taipei Hsien, Taiwan, ROC
Web site:
http://www.leap.com.tw
Tel:02-29991860
Fax:02-29990015
E-mail:
[email protected]
ChipStation (1*1)
SU - 2000 (1*8)
Xeltek Electronic Co., Ltd
338 Hongwu Road, Nanjing, China
210002
Web site:
http://www.xeltek-cn.com
Tel:+86-25-4408399, 4543153-206
E-mail:
[email protected],
[email protected]
Superpro/2000 (1*1)
Superpro/680 (1*1)
Superpro/280 (1*1)
Superpro/L+(1*1)
Advantech
7F, No.98, Ming-Chung Rd.,
Shin-Tien City, Taipei, Taiwan,
ROC
Web site:
http://www.aec.com.tw
Specifications subject to change without notice,contact your sales representatives for the most recent information.
24/25
Ver 1.0
PID 8958A 09/02
SyncMOS Technologies Inc.
SM8958A
September 2002
Feedback / Inquiry:
To
Attn
Fax
Tel
:SyncMOS Technologies, Inc.
:MKT / Customer Service Dept.
:886-3-579-2960
:886-3-578-0493
:886-3-579-2988
:886-3-579-2926
From
:
Company :
Dept, Section :
Position Title :
Inquiry Date :
Ref No :
:
Request customer logo as below :
Specifications subject to change without notice,contact your sales representatives for the most recent information.
25/25
Ver 1.0
PID 8958A 09/02