SMA6F High junction temperature Transil™ Features ■ Halogen-free package ■ Peak pulse power: – 600 W (10/1000 µs) – 4 kW (8/20 µs) ■ Stand off voltage: 5, 12 or 13 V ■ Unidirectional type ■ Low clamping voltage versus standard series ■ Low leakage current, 0.2 µA at 25 °C ■ Operating Tj max: 175 °C ■ JEDEC registered package outline A K Unidirectional SMAflat Complies with the following standards ■ IEC 61000-4-2 level 4: – 15 kV (air discharge) – 8 kV (contact discharge) ■ MIL STD 883G-Method 3015-7: class3B – 25 kV (human body model) Description The SMA6F Transil series has been designed to protect sensitive equipment against electro-static discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical over stress such as IEC 61000-4-4 and 5. They are generally for surges below 600 W 10/1000 µs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. Their low clamping voltages provides a better safety margin to protect sensitive circuits with extended life time expectancy. Packaged in SMAflat non exposed pad, this minimizes PCB space consumption (footprint in accordance with IPC 7531 standard). September 2008 TM: Transil is a trademark of STMicroelectronics Rev 1 1/9 www.st.com 9 Characteristics SMA6F 1 Characteristics Table 1. Absolute ratings (Tamb = 25 °C) Symbol Parameter Value Unit 600 W Peak pulse power dissipation (1) Tj initial = Tamb Power dissipation on infinite heatsink Tlead = 55 °C 6 W IFSM Non repetitive surge peak forward current for unidirectional types tp = 10 ms Tj initial = Tamb 60 A Tstg Storage temperature range -65 to +175 °C Tj Operating junction temperature range -55 to +175 °C TL Maximum lead temperature for soldering during 10 s 260 °C Value Unit 20 °C/W PPP P 1. For a surge greater than the maximum values, the diode will fail in short-circuit. Table 2. Thermal resistance Symbol Rth (j-l) Table 3. Symbol Parameter Junction to leads Electrical characteristics - definitions (Tamb = 25 °C) Parameter VRM Stand-off voltage VBR Breakdown voltage VCL Clamping voltage IRM Leakage current @ VRM IPP Peak pulse current αT Voltage temperature coefficient VF Forward voltage drop RD Dynamic resistance 2/9 I IF VF VCL VBR VRM IRM IR IPP V SMA6F Characteristics Table 4. Electrical characteristics - values (Tamb = 25 °C) VBR @IR(1) IRM max@VRM Type 25 °C 85 °C µA (Max) min V typ max V VCL @IPP RD(2) VCL @IPP RD(2) 10/1000 µs 10/1000 µs 8/20 µs 8/20 µs αT(3) max max mA max V A Ω V A Ω 10-4/°C SMA6F5.0A 10 50 5.0 6.40 6.74 7.07 10 9.2 68 0.029 13.4 298 0.021 5.7 SMA6F12AVCL 0.2 1 12 13.2 13.7 14.3 1 18.5 31 0.135 22.9 157 0.055 7.8 SMA6F13A 0.2 1 13 14.4 15.2 15.9 1 20.4 29 0.154 23.9 147 0.054 8.3 1. Pulse test: tp <50ms. 2. To calculate maximum clamping voltage at other surge currents, use the following formula VCLmax = RD x IPP + VBRmax 3. To calculate VBR versus junction temperature, use the following formula: VBR @ Tj = VBR @ 25 °C x (1 + αT x (Tj - 25)) Figure 1. Definition of Ipp pulse %IPP Repetitive peak pulse current tr = rise time (µs) tp = pulse duration time (µs) 100 50 0 tr Figure 2. t tp Relative peak power dissipation versus initial junction temperature Figure 3. PPP[T j initial] / PPP[T j initial=25°C] Peak pulse power versus exponential pulse duration (Tj initial = 25 °C) PPP(kW) 1.1 100.0 Tj initial = 25 °C 1.0 0.9 0.8 10.0 0.7 0.6 0.5 0.4 1.0 0.3 0.2 Tj initial (°C) 0.1 tp(ms) 0.0 0.1 0 25 50 75 100 125 150 175 200 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 3/9 Characteristics SMA6F Figure 4. 1000.0 Clamping voltage versus peak pulse current (exponential waveform, maximum values) IPP(A) Tj initial=25 °C SMA6F5.0A SMA6F12AVCL 100.0 SMA6F13A 10.0 1.0 tp = 8/20 µs tp = 10/1000 µs VCL(V) 0.1 5 Figure 5. 10 15 20 Junction capacitance versus reverse applied voltage (typical values) 10000 C(pF) F=1 MHz VOSC=30 mVRMS Tj=25 °C SMA6F5.0A 1000 SMA6F12AVCL SMA6F13A VR(V) 100 1 4/9 10 100 25 SMA6F Figure 6. Characteristics Peak forward voltage drop versus peak forward current (typical values) Figure 7. IFM(A) 1.0E+02 1.00 Relative variation of thermal impedance junction to ambient versus pulse duration (printed ciruit board FR4, SCu = 1 cm2) Zth(j-a)/Rth(j-a) On recommended pad layout 1.0E+01 0.10 1.0E+00 Tj =125 °C Tj =25 °C 0.01 1.0E-01 VFM(V) tp(S) 1.0E-02 0.0 Figure 8. 0.5 1.0 1.5 2.0 Thermal resistance junction to ambient versus copper surface under each lead (printed circuit board FR4, copper thickness = 35 µm) Rth(j-a)(°C/W) 0.00 1.0E-03 Figure 9. 1.E+04 200 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 Leakage current versus junction temperature (typical values) IR(nA) 180 160 1.E+03 140 VBR=11.7V 120 1.E+02 100 80 VBR>11.7V 60 1.E+01 40 20 SCU(cm2) VR=VRM Tj(°C) 1.E+00 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 25 50 75 100 125 150 175 5/9 Ordering information scheme 2 SMA6F Ordering information scheme Figure 10. Ordering information scheme SM Surface Mount Package A = SMAflat package Surge rating 6F = 600 W Stand off voltage example: 5.0 = 5.0 V Type A = Unidirectional Delivery mode TR = Tape and reel 6/9 A 6F xx A - TR SMA6F 3 Package information Package information ● Case: JEDEC DO-221AC molded plastic over Planar junction ● Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 ● Polarity: Band indicates cathode ● Flammability: Epoxy rated UL94V-0 ● RoHS package In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. Table 5. SMAflat (non exposed pad) dimensions Dimensions Ref. A L 2x L1 2x E E1 L L2 2x b Inches Min. Typ. Max. Min. A 0.90 1.10 0.035 0.043 b 1.25 1.65 0.049 0.065 c 0.15 0.40 0.006 0.016 D 2.25 2.95 0.088 0.116 E 4.80 5.60 0.189 0.220 E1 3.95 4.60 0.156 0.181 L 0.75 1.50 0.030 0.059 c D Millimeters Typ. L1 0.50 0.019 L2 0.50 0.019 Max. Figure 11. SMAflat footprint dimensions Figure 12. Marking information 5.52 (0.217) Cathode bar (unidirectional devices only ) 1.52 (0.060) e3 x x x z y ww 1.20 (0.047) 3.12 (0.123) e3: ECOPACK ( Leadfree) XXX: Marking Z: Manufacturing location Y: Year WW: week 1.20 (0.047) millimeters (inches) 7/9 Ordering information 4 Ordering information Table 6. 5 Ordering information Order code Marking SMA6F5.0A-TR SUA SMA6F12AVCL-TR SUJ SMA6F13A-TR SUG Package Weight SMAflat 0.035 g Revision history Table 7. 8/9 SMA6F Document revision history Date Revision 04-Sep-2008 1 Changes First issue. Base qty Delivery mode 10000 Tape and reel SMA6F Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9