SPA498-01 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMP, 13000 VOLTS HIGH VOLTAGE RECTIFIER BRIDGE STACK Designer’s Data Sheet Part Number / Ordering Information 1/ SPA498-01 __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level (+) Features: • • • • • Aerospace high voltage power supply applications High blocking voltage – 13 kV minimum Low mechanical stress design TX, TXV, and Space level screening available Consult factory for: Higher blocking voltages Faster switching speeds Other electrical configurations (–) MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage and DC Blocking Voltage Bridge BR1 Bridge BR2 Bridge BR3 Average Rectified Forward Current (Non-repetitive, t = 8.3 ms Pulse ) Peak Surge Current (Non-repetitive, t = 8.3 ms Pulse, T A = 25ºC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Tab Symbol Value Units VR 5000 3000 5000 Volts IO 1 Amps IFSM 25 Amps Top & Tstg -65 to +150 ºC RθJT 2.5 ºC/W ELECTRICAL SCHEMATIC (–) (+) Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0016B DOC SPA498-01 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS @ TA = 25ºC (unless otherwise specified) PARAMETER, per each Bridge (CR1-CR13) Leg Instantaneous Forward Voltage Drop (IF = 1.0 A, 300 – 500 µsec pulse) Reverse Leakage (VR = 1000 V, 300 µsec pulse minimum) TA = 25ºC TA = 100ºC Reverse Recovery Time (IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A) SYMBOL MIN MAX UNIT VF1 - 1.9 Volts IR1 IR2 - 5.0 500 µAmps tRR - 70 nsec CASE OUTLINES: ASPM – + Tolerances (unless specified): .XX±.03 .XXX±.010 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0016B DOC