STP100NF03L-03 STB100NF03L-03 STB100NF03L-03-1 N-channel 30V - 0.0026Ω - 100A - D2PAK/I2/TO-220 STripFET™ III Power MOSFET General features Type VDSS RDS(on) ID STB100NF03L-03 30V <0.0032Ω 100A STB100NF03L-03-1 30V <0.0032Ω 100A STP100NF03L-03 30V <0.0032Ω 100A ■ Low threshold drive ■ 100% avalanche tested ■ Logic level device 3 1 3 1 2 D2PAK TO-220 3 12 I2PAK Description This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number STB100NF03L-03T4 Marking B100NF03L STB100NF03L-03-1 B100NF03L STP100NF03L-03 P100NF03L June 2006 Package Tape & reel 2PAK Tube TO-220 Tube D I Rev 2 Packaging 2PAK 1/15 www.st.com 15 Contents STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 ................................................ 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 1 Electrical ratings Electrical ratings Table 1. Symbol VDS VDGR Absolute maximum ratings Parameter Value Unit Drain-source voltage (VGS = 0) 30 V Drain-gate voltage (RGS = 20 kΩ) 24 V VGS Gate- source voltage ± 16 V ID(1) Drain current (continuous) at TC = 25°C 100 A ID(1) Drain current (continuous) at TC = 100°C 100 A Drain current (pulsed) 400 A Total dissipation at TC = 25°C 300 W 2 W/°C 1.9 J -55 to 175 °C IDM(2) Ptot Derating Factor EAS (3) Tstg Tj Single pulse avalanche energy Storage temperature Max. operating junction temperature 1. Value limited by wire bonding 2. Pulse width limited by safe operating area. 3. Starting Tj = 25 °C, ID = 50A, VDD = 50V Table 2. Thermal data Rthj-case Thermal resistance junction-case max 0.5 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W Maximum lead temperature for soldering purpose 300 °C TJ 3/15 Electrical characteristics 2 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = max ratings VDS = max ratings, TC = 125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 16V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 50A VGS = 4.5V, ID = 50A Table 4. Symbol Test conditions Typ. Max. 30 1 Unit V 1 10 µA µA ±100 nA 1.7 2.5 V 0.0026 0.0032 0.0032 0.0045 Ω Ω Typ. Max. Unit Dynamic Parameter Test conditions Min. 10 gfs (1) Forward transconductance VDS>ID(on)xRDS(on)max , ID = 30A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1MHz, VGS = 0 6200 1720 300 pF pF pF td(on) tr td(off) tf Turn-on delay time Rise time Turn-off delay time Fall time VDD = 15V, ID = 50A RG = 4.7Ω VGS = 4.5V (see Figure 13) 35 315 115 95 ns ns ns ns Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 24V, ID = 100A, VGS = 5V (see Figure 14) 88 22.5 36 nC nC nC 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 4/15 Min. S STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Table 5. Symbol Source drain diode Parameter ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD trr Qrr IRRM Electrical characteristics Test conditions Min. Typ. ISD = 100A, VGS = 0 ISD = 100A, Reverse recovery time di/dt = 100A/µs, Reverse recovery charge VDD = 20V, Tj = 150°C Reverse recovery current (see Figure 15) 75 150 4 Max. Unit 100 400 A A 1.3 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/15 Electrical characteristics STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/15 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Electrical characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/15 Test circuit 3 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/15 Figure 18. Switching time waveform STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 E1 0.368 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0º 0.015 4º 3 V2 0.4 1 10/15 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MAX. MIN. A 4.40 MIN. TYP 4.60 0.173 TYP. 0.181 MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 11/15 Package mechanical data STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/15 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 13/15 Revision history 6 STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Revision history Table 6. 14/15 Revision history Date Revision Changes 21-Jun-2006 1 First document 19-Jun-2006 2 New template, no content change STB100NF03L-03 - STB100NF03L-03-1 - STP100NF03L-03 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15