STB80NF55-08T4 STP80NF55-08, STW80NF55-08 N-channel 55 V, 0.0065 Ω, 80 A, TO-220, D2PAK, TO-247 STripFET™ Power MOSFET Features ■ Type VDSS RDS(on) max ID STB80NF55-08T4 55 V < 0.008 Ω 80 A STP80NF55-08 55 V < 0.008 Ω 80 A STW80NF55-08 55 V < 0.008 Ω 80 A 2 3 1 TO-247 2 TO-220 Standard threshold drive 3 Application ■ 3 1 1 D²PAK Switching applications Description This Power MOSFET is the latest development of STMicroelectronics unique “single feature size” strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Table 1. Figure 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STB80NF55-08T4 B80NF55-08 D²PAK Tape and reel STP80NF55-08 P80NF55-08 TO-220 Tube STW80NF55-08 W80NF55-08 TO-247 Tube April 2009 Doc ID 14511 Rev 2 1/15 www.st.com 15 Contents STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 5 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 ................................................ 8 Doc ID 14511 Rev 2 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage (VGS = 0) 55 V VGS Gate- source voltage ±20 V Drain current (continuos) at TC = 25 °C 80 A Drain current (continuos) at TC = 100 °C 80 A Drain current (pulsed) 320 A Total dissipation at TC = 25 °C 300 W 2 W/°C -55 to 175 °C ID (1) ID (1) IDM (2) PTOT Derating factor Tj Tstg Operating junction temperature Storage temperature 1. Current limited package 2. Pulse width limited by safe operating area Table 3. Thermal resistance Value Symbol Parameter D2PAK Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max 35(1) Tl Maximum lead temperature for soldering purpose 300 Unit TO-220 TO-247 0.5 62.5 °C/W 50 °C/W °C 1. When mounted on 1 inch2 FR-4 board, 2 oz Cu Table 4. Symbol Avalanche characteristics Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 30 V) Doc ID 14511 Rev 2 Max value Unit 40 A 1000 mJ 3/15 Electrical characteristics 2 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 5. Symbol On/off states Parameter Test conditions Drain-source breakdown voltage ID = 250 µA, VGS = 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = max rating VDS = max rating@125 °C IGSS Gate body leakage current (VDS = 0) VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 40 A V(BR)DSS Table 6. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Min. Typ. Max. 55 2 Unit V 3 1 10 µA µA ±100 nA 4 V 0.0065 0.008 Ω Dynamic Parameter Test conditions Min. Typ. Max. Unit Forward transconductance VDS =15 V , ID = 18 A 40 S Input capacitance Output capacitance Reverse transfer capacitance VDS = 25 V, f = 1 MHz, VGS= 0 3740 830 265 pF pF pF Total gate charge Gate-source charge Gate-drain charge VDD= 27 V, ID = 80 A VGS =10 V (see Figure 14) 112 20 40 155 nC nC nC Typ. Max. Unit 1. Pulsed: pulse duration=300 µs, duty cycle 1.5% Table 7. Symbol td(on) tr td(off) tf 4/15 Switching times Parameter Turn-on delay time Rise time Turn-off-delay time Fall time Test conditions VDD = 27 V, ID = 40 A RG = 4.7 Ω VGS = 10 V (see Figure 13) Doc ID 14511 Rev 2 Min. 20 110 75 35 ns ns ns ns STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Table 8. Symbol ISD ISDM (1) Electrical characteristics Source drain diode Parameter Test conditions Max Unit Source-drain current 80 A Source-drain current (pulsed) 320 A 1.5 V VSD Forward on voltage ISD = 80 A, VGS = 0 trr(2) Qrr IRRM Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 80 A,VDD = 25 V di/dt=100 A/µs, Tj =150 °C (see Figure 18) Min Typ. 80 230 5.7 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300µs, duty cycle 1.5% Doc ID 14511 Rev 2 5/15 Electrical characteristics STB80NF55-08T4, STP80NF55-08, STW80NF55-08 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized BVDSS vs temperature Figure 7. Static drain-source on resistance 6/15 Doc ID 14511 Rev 2 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Figure 8. Gate charge vs gate-source voltage Figure 9. Figure 10. Normalized gate threshold voltage vs temperature Electrical characteristics Capacitance variations Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics Doc ID 14511 Rev 2 7/15 Test circuits 3 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/15 Figure 18. Switching time waveform Doc ID 14511 Rev 2 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 14511 Rev 2 9/15 Package mechanical data STB80NF55-08T4, STP80NF55-08, STW80NF55-08 TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 10/15 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Doc ID 14511 Rev 2 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 Typ A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e Max. 5.15 5.45 L 14.20 L1 3.70 14.80 4.30 L2 18.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 Doc ID 14511 Rev 2 11/15 Package mechanical data STB80NF55-08T4, STP80NF55-08, STW80NF55-08 D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.409 0.208 0.624 0.106 0.110 0.055 0.069 0.016 0079457_M 12/15 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.4 0° Typ Doc ID 14511 Rev 2 8° STB80NF55-08T4, STP80NF55-08, STW80NF55-08 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. inch MAX. MIN. inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 0.153 0.161 P0 3.9 4.1 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type Doc ID 14511 Rev 2 13/15 Revision history 6 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Revision history Table 9. 14/15 Document revision history Date Revision Changes 03-Mar-2008 1 First release 15-Apr-2009 2 Table 1: Device summary has been updated Doc ID 14511 Rev 2 STB80NF55-08T4, STP80NF55-08, STW80NF55-08 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 14511 Rev 2 15/15