STGD10NC60H N-channel 10A - 600V - DPAK Very fast PowerMESH™ IGBT Features Type VCES STGD10NC60H 600V IC VCE(sat) (Max)@ 25°C @100°C < 2.5V 10A ■ Low on-voltage drop (Vcesat) ■ Low CRES / CIES ratio (no cross-conduction susceptibility) 3 1 DPAK Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix "H" identifies a family optimized for high frequency applications in order to achieve very high switching performances (reduced tfall) manta in ing a low voltage drop. Internal schematic diagram Applications ■ High frequency motor controls ■ SMPS and PFC in both hard switch and resonant topologies ■ Motor drivers Order code Part number Marking Package Packaging STGD10NC60H GD10NC60H DPAK Tape & reel April 2007 Rev 1 1/14 www.st.com 14 Contents STGD10NC60H Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ............................................... 9 STGD10NC60H 1 Electrical ratings Electrical ratings Table 1. Symbol Absolute maximum ratings Parameter Value Unit VCES Collector-emitter voltage (VGS = 0) 600 V IC(1) Collector current (continuous) at TC = 25°C 20 A IC(1) Collector current (continuous) at TC = 100°C 10 A ICL(2) Collector current (pulsed) 40 A VGE Gate-emitter voltage ±20 V PTOT Total dissipation at TC = 25°C 60 W – 55 to 150 °C Value Unit Tj Operating junction temperature 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------C C R × V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=480V, Tj=150°C, RG=10Ω, VGE=15V Table 2. Symbol Thermal resistance Parameter Rthj-case Thermal resistance junction-case max 2.08 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W 3/14 Electrical characteristics 2 STGD10NC60H Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Parameter VBR(CES) Collector-emitter breakdown voltage ICES Collector cut-off current (VGE = 0) IGES Test conditions IC= 1mA, VGE= 0 Min. Typ. Max. 600 Unit V VCE= Max rating,TC= 25°C VCE=Max rating,TC= 125°C 150 1 µA mA Gate-emitter leakage current (VCE = 0) VGE= ±20V, VCE= 0 ±100 nA VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA 5.75 V VCE(sat) Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125°C 2.5 V V gfs Table 4. Symbol Cies Coes Cres Qg Qge Qgc 4/14 Static Forward transconductance 3.75 1.9 1.7 VCE = 15V, IC= 5A 3.5 S Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 16) Min. Typ. Max. Unit 365 43 8.3 pF pF pF 19.2 4.5 7 nC nC nC STGD10NC60H Electrical characteristics Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Table 6. Symbol Eon Eoff(1) Ets Eon Eoff(1) Ets Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions Min. VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Figure 15. Figure 17. VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj=125°C Figure 15. Figure 17. Vcc = 390V, IC = 5A, RGE = 10Ω, VGE = 15V, Figure 15. Figure 17. Vcc = 390V, IC = 5A, RGE=10Ω, VGE =15V, Tj=125°C Figure 15. Figure 17. Typ. Max. Unit 14.2 5 1000 ns ns A/µs 14 5 920 ns ns A/µs 27 72 85 ns ns ns 50 108 139 ns ns ns Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching Losses Total switching losses Test conditions VCC = 390V, IC = 5A RG= 10Ω, VGE=15V, Tj=25°C (see Figure 17) VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj= 125°C (see Figure 17) Min. Typ. Max. Unit 31.8 95 126.8 µJ µJ µJ 61.8 173 234.8 µJ µJ µJ 1. Turn-off losses include also the tail of the collector current 5/14 Electrical characteristics STGD10NC60H 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. 6/14 Capacitance variations STGD10NC60H Electrical characteristics Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 7/14 Electrical characteristics Figure 13. Thermal Impedance 8/14 STGD10NC60H Figure 14. Turn-off SOA STGD10NC60H 3 Test circuits Test circuits Figure 15. Test circuit for inductive load switching Figure 16. Gate charge test circuit Figure 17. Switching waveform 9/14 Package mechanical data 4 STGD10NC60H Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/14 STGD10NC60H Package mechanical data DPAK MECHANICAL DATA mm. inch DIM. MAX. MIN. A A1 A2 B b4 MIN. 2.2 0.9 0.03 0.64 5.2 TYP 2.4 1.1 0.23 0.9 5.4 0.086 0.035 0.001 0.025 0.204 0.094 0.043 0.009 0.035 0.212 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 0.45 0.48 6 0.6 0.6 6.2 0.017 0.019 0.236 0.023 0.023 0.244 6.6 0.252 5.1 6.4 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.260 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 11/14 Packaging mechanical data 5 STGD10NC60H Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 12/14 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STGD10NC60H 6 Revision history Revision history Table 7. Revision history Date Revision 02-Apr-2007 1 Changes Initial release. 13/14 STGD10NC60H Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14