Filename: tfs 448b.doc Version 1.1 VI TELEFILTER 27.11.2006 Filter specification TFS 448B 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 200 200 °C dBm Ω Ω Characteristics Remark: The nominal frequency fN is fixed at 448,0 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 448B is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion loss (reference level) ae Nominal frequency max. 4,5 448,0 dB MHz BW dB 10,6 Relative attenuation 100 MHz 545 MHz 600 MHz 665 MHz 1250 MHz Input power level dB - fN Bandwidth 3 2,9 tolerance / limit MHz - arel ... ... ... ... ... 350 600 665 1250 1500 Operating temperature range MHz MHz MHz MHz MHz dB dB dB dB dB - OTR Storage temperature range Temperature coefficient of frequency 53 53 49 54 50 TCf * min. min. min. min. min. max. 50 48 42 50 45 10 - - 40 °C ... + 85 °C - - 45 °C ... + 95 °C -32 dB dB dB dB dB dBm ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Generated: Checked / Approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 448b.doc Version 1.1 VI TELEFILTER 27.11.2006 Filter specification TFS 448B 2/5 0 0 -3 -10 -6 -20 -9 -30 -12 -40 magnitude in dB magnitude in dB Filter characteristic -15 -18 -50 -60 -21 -70 -24 -80 -27 -90 -30 440 441.6 443.2 444.8 446.4 448 449.6 frequency in MHz 451.2 452.8 454.4 -100 1 456 151 301 451 601 751 901 frequency in MHz 1051 1201 1351 1501 C onstruction and pin connection (All dimensions in mm) 6 7 448B ● U48 8 4 3 2 1 1,2 Max. 5 Date code d. Gr 7 3,0 +/-0,15 0,6 60 0,6 Ground Input Ground Ground Ground Output Ground Ground Date code: U V W ... Year + week 2006 2007 2008 3 1,5 1 1 2 3 4 5 6 7 8 5 0,6 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 448b.doc Version 1.1 VI TELEFILTER 27.11.2006 Filter specification TFS 448B 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 448b.doc Version 1.1 VI TELEFILTER 27.11.2006 Filter specification TFS 448B 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 448b.doc VI TELEFILTER Version 1.1 Filter specification 27.11.2006 TFS 448B 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 25.10.2006 1.1 - Generation of filter specification - Added typical values - Added filter characteristic - Reworked relative attenuation limit line scheme Martens 27.11.2006 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.