表面贴装整流桥 TMB05S thru TMB10S Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier Reverse Voltage 50 to 1000V Forward Current 0.8A FEATURES 表面贴装应用 超薄塑料封装（1.4MM） 玻璃钝化芯片 高浪涌电流 30A 最高焊接温度 260℃ /10 秒 MECHANICAL DATA 封装: 塑料封装: 焊接端子: 锡镀层 包装: 重量: 0.102g 5 K / Reel（13”） 100K/箱 MAXIMUM RATINGS AND THERMAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Symbols TMB05S TMB1S TMB2S TMB4S TMB6S TMB8S TMB10S Units Maximum recurrent peak reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward output rectified current (see Fig :1) on glass-epoxy P.C.B. (1) IF(AV) on aluminum substrate (2) 0.5 Amps 0.8 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC IFSM 30.0 Amps VF 1.0 Volts Method) Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ 5.0 IR 100.0 μA Rating for fusing (t<8.3ms) 2 It 5.0 A sec Typical junction capacitance per leg at 4.0V.1MHz CJ 13.0 pF RΘJL 20.0 RΘJA 85.0(1) RΘJA 70.0(2) ℃/W TJTSTG -55 to+150 ℃ Typical thermal resistance per leg Operating junction and storage temperature range NOTES: 1. On glass epoxy P.C.B. mounted on0.05*0.05”(1.3*1.3mm)pads 2. On aluminum substrate P.C.B. with an area of 0.8”(20*20mm) mounted 2 RATINGS AND CHARACTERISTIC CURVES TMB05S thru TMB10S