MEANWELL TS

TS-3000
3000W True Sine Wave DC-AC Inverter
series
Features :
True sine wave output (THD<3%)
High surge power up to 6000W
High efficiency up to 92%
Power ON-OFF switch
Standby saving mode can be selectable
Front panel indicator for operation status
Thermostatically controlled cooling fan
Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp.
/ Output short / Input polarity reverse / Overload / AC circuit breaker
Application : Home appliance, power tools, office and portable
equipment, vehicle and yacht ...etc.
Optional monitoring software and connection cable
(MW order No.: DS-TN-1500)
3 years warranty
E13
SPECIFICATION
MODEL
TS-3000-124
TS-3000-112
TS-3000-148
TS-3000-212
TS-3000-224
TS-3000-248
3000W
RATED POWER (Typ.)
MAXIMUM OUTPUT POWER (Typ.) 3450W for 180 sec. / 4500W for 10 sec. / surge power 6000W for 30 cycles
Factory setting set at 110VAC
Factory setting set at 230VAC
100 / 110 / 115 / 120VAC selectable by setting button S.W
200 / 220 / 230 / 240VAC selectable by setting button S.W
FREQUENCY
60 0.1Hz
50 0.1Hz
WAVEFORM
True sine wave (THD<3%) at rated input voltage
AC VOLTAGE
OUTPUT
50/60Hz selectable by setting button S.W
3%
AC REGULATION (Typ.)
SAVING MODE (Typ.)
Default disabled. Load
FRONT PANEL INDICATOR
Battery voltage level, output load level, saving mode, fault and operation status
BAT. VOLTAGE
12V
VOLTAGE RANGE (Typ.) Note.3,6 10.5 ~ 15VDC
DC CURRENT (Typ.)
INPUT
Note.4 300A
5W will be changed to standby mode
24V
48V
12V
24V
48V
21 ~ 30VDC
150A
42 ~ 60VDC
75A
10.5 ~ 15VDC
21 ~ 30VDC
42 ~ 60VDC
300A
150A
75A
91%
89%
91%
92%
20A*6
45V
40A*12
11.3V
40A*6
22.5V
20A*6
45V
42V
10.5V
21V
42V
NO LOAD DISSIPATION (Typ.)
10W @ standby saving mode
OFF MODE CURRENT DRAW (Typ.)
1mA
EFFICIENCY (Typ.)
90%
Open & sealed lead acid battery
Note.1 88%
BATTERY TYPES
FUSE
40A*6
40A*12
BATTERY BAT. LOW ALARM
22.5V
Note.6 11.3V
INPUT
21V
PROTECTION BAT. LOW SHUTDOWN Note.6 10.5V
By internal fuse open
REVERSE POLARITY
90
OVER TEMPERATURE
OTHERS
NOTE
5
80
5
75
5
75
5
AC output receptacle:15A
Optional (Only type F)
@ 100% load ; 60 @ 50% load
20% ~ 90% RH non-condensing
None
Note.2 0 ~ +40
STORAGE TEMP., HUMIDITY
VIBRATION
LVD
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
DIMENSION
PACKING
85
Protection type : Shut down o/p voltage, re-power on to recover
WORKING HUMIDITY
EMC IMMUNITY
CONTROL WIRING
5
Protection type : Shut down o/p voltage, re-power on to recover
SAFETY STANDARDS
SAFETY &
EMC
85
105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
CIRCUIT BREAKER
GFCI PROCTECTION
WORKING TEMP.
5
Protection type : Shut down o/p voltage, re-power on to recover
OUTPUT SHORT
OUTPUT
PROTECTION OVER LOAD (Typ.)
ENVIRONMENT
50/60Hz selectable by setting button S.W
-30 ~ +70
/ -22 ~ +158oF, 10 ~ 95% RH
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
None
UL458 (only for Type G )
EN60950-1
None
Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark
Compliance to FCC class A
None
Compliance to EN61000-4-2,3,4,5,6,8,11
RJ11 -RS232 (Option)
466.8*283.5*100mm (L*W*H)
12.9Kg; 1pcs/14Kg/1.98CUFT
1.Efficiency is tested by 2100W, linear load at 13V, 26V, 52V input voltage.
2.Output derating capacity referenced by curve 1.
3.Output derating capacity referenced by curve 2.
4.DC current is tested by 3000W, linear load at 12V, 24V, 48V input voltage.
5.All parameters not specified above are measured at rated load, 25 of ambient temperature.
6.The tolerance of each voltage value by models is:112/212
0.5V;124/224
1V;148/248
2V
File Name:TS-3000-SPEC 2011-12-21
TS-3000
3000W True Sine Wave DC-AC Inverter
TS
3000
A :TYPE A OUTLET
B :TYPE B OUTLET
C :TYPE C OUTLET
D :TYPE D OUTLET
E :TYPE E OUTLET
F :TYPE F OUTLET
G :TYPE G TERMINAL
112 A
12:12VDC
Bat. Voltage: 24:24VDC
48:48VDC
TS:True sine wave inverter
Output:
O/P Wattage:3000W
series
1:110VAC
2:230VAC
AC Output Receptacle (optional)
Receptacle type
(Terminal only)
Country
TYPE-A
TYPE-B
TYPE-C
TYPE-D
TYPE-E
TYPE-F
TYPE-G
USA
EUROPE
AUSTRALIA
U.K
JAPAN
GFCI
-----
E13
Certificate
E13
E13
(Expect for 48V input)
Derating Curve
Mechanical Specification
Unit:mm
161.84
122.44
100
LOAD (%)
POS
100
31.6
80
60
40
NEG
Reverse Polarity
Will Damage The
Unit.
20
0
46
Air flow
direction
10
20
30
40
50
60
70
AMBIENT TEMPERATURE ( )
CURVE 1
Air flow
direction
100
LOAD (%)
90.3
80
7
7.5
60
40
20
10.5VDC
11.5VDC
15VDC
(HORIZONTAL)
AC Receptacle
466.8
286.2
BATTERY INPUT VOLTAGE (V)
CURVE 2
ON
OFF
100
BATTERY
INVERTER
i t Br e
r
Ci
er
Setting
On
0
0
t
Pr
Bat Low
se
e
s
LOAD
100
ak
cu
s
t o
R
e
Saving
Chassis
Ground
Cat.No.(1GG1HS-212)
Wire Range(10-4 AWG Str
Cu Soldered Wires)
Torque (17.7-26.5 in lb)
13
Remote
port
AC OUTPUT
31.29
Type-A
NC
NC
AC OUTPUT
L
Note: When the load current is >15A, must
use output terminal connection which
can be found inside the AC output panel
of the inverter.
FG
N
AC Receptacle
ON
OFF
100
r
Ci
12
er
34
e
283.5
Setting
0
s
t o
R
Bat Low
e
Saving
Chassis
Ground
Cat.No.(1GG1HS-212)
Wire Range(10-4 AWG Str
Cu Soldered Wires)
Torque (17.7-26.5 in lb)
Remote
port
13
273
LOAD
100
On
0
se
t
Pr
s
BATTERY
INVERTER
i t Br e
ak
cu
AC OUTPUT
31.29
Type-B
File Name:TS-3000-SPEC 2011- 12-21