ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposes series MT Standard series with 5mm height. Adapted to the RoHS directive (2002/95/EC). High Temperature ML Low Leakage Current MV Long Life MA Smaller Low Impedance MF MJ Specifications Item Performance Characteristics – 40 ~ +85°C Category Temperature Range Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 470µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Leakage Current Measurement frequency : 120Hz, Temperature : 20°C tan δ 4 0.35 Rated voltage (V) tan δ (MAX.) Figures in ( 6.3 10 16 25 35 50 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series. ) are for Measurement frequency : 120Hz 4 7 15 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z– 40°C / Z+20°C 6.3 4 8 10 3 6 16 2 4 Capacitance change tan δ Leakage current 25 2 4 35 2 3 50 2 3 Within ±20% of initial value (MR series & φ 3 product : Within ±25%) 200% or less of initial specified value Initial specified value or less Endurance After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Type numbering system (Example : 25V 10µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve (P.E.T.) d P ±0.5 D+0.5MAX f UMA 1 E 1 0 0 M D D D Code 3 2 4~8 Ñ Configuration 1 Capacitance tolerance (± 20%) Rated capacitance (10mF) Rated voltage (25V) Series name Type f 2 Size code f ( f 3: P±0.3 ) L+1MAX 15MIN 4MIN (mm) D 3 4 5 6.3 8 P 1.0 1.5 2.0 2.5 2.5 fd 0.4 0.45 0.45 0.45 0.45 f 1 Configuration Pb-free leadwire fD Pb-free PET sleeve 3 CD 4~8 DD • Please refer to page 21 about the end seal configulation. 2 In case at f 3 units, put 2 as size code. Dimensions Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 6.3 0J 4 0G V Code 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 19 28 33 56 96 145 185 0.3 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 10 1A 15 28(21) 37 45 70(68) 110(90) 170 0.5 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 16 1C 33 41 52(43) 80(76) 135 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 25 1E 10 23(18) 37 49(43) 58 92(86) 0.3 × 5 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 0.8 × 5 0.8 × 5 35 1V 10 16(12) 27 42 52 70(62) 110 0.3 × 5 0.4 × 5 0.4 × 5 0.5 × 5 6.3 × 5 0.8 × 5 0.8 × 5 50 1H 4 × 5(3 × 5) 1.0(1.0) 4 × 5(3 × 5) 2.0(2.0) 4 × 5(3 × 5) 2.8(2.8) 4 × 5(3 × 5) 4.0(4.0) 4 × 5(3 × 5) 8.4(8.0) 8.4 0.4 × 5 13(10) 0.4 × 5 15(10) 17 18 0.5 × 5 20 29 6.3 × 5 33 46 0.8 × 5 52(48) 0.8 × 5 62(52) 71 80 Case size φ D × L (mm) Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " " Size φ6.3 × 5 is available for capacitors marked. " " In such a case, M R will be put at 2nd and 3rd digit of type numbering system. Rated ripple Rated Ripple (mArms) at 85°C 120Hz ( ) = φ3 units and MR series. Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V