Transistors with built-in Resistor UNR2221/2222/2223/2224 (UN2221/2222/2223/2224) Silicon NPN epitaxial planer transistor Unit: mm +0.2 2.8 –0.3 +0.25 0.65±0.15 For digital circuits 1.5 –0.05 0.65±0.15 +0.1 +0.2 1.45 3 0.4 –0.05 2.9 –0.05 1 0.95 ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. Mini type package, allowing downsizing of the equipment and automatic insertion through tape packing and magazine packing. 1.9±0.2 ● 0.95 ■ Features 2 ● ■ Absolute Maximum Ratings 0.1 to 0.3 0.4±0.2 (Ta=25˚C) Parameter Symbol Ratings Unit Collector to base voltage VCBO 50 V Collector to emitter voltage VCEO 50 V Collector current IC 500 mA Total power dissipation PT 200 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 to +150 ˚C ■ Electrical Characteristics Parameter +0.1 +0.2 (R2) 2.2kΩ 4.7kΩ 10kΩ 10kΩ 1:Base 2:Emitter 3:Collector 0 to 0.1 ● (R1) 2.2kΩ 4.7kΩ 10kΩ 2.2kΩ 0.8 ● Marking Symbol UNR2221 9A UNR2222 9B UNR2223 9C UNR2224 9D 1.1 –0.1 ● 0.16 –0.06 ■ Resistance by Part Number EIAJ:SC-59 Mini Type Package Internal Connection C R1 B R2 E (Ta=25˚C) Symbol Conditions min typ max Unit ICBO VCB = 50V, IE = 0 1 µA ICEO VCE = 50V, IB = 0 1 µA IEBO VEB = 6V, IC = 0 2 Collector to base voltage VCBO IC = 10µA, IE = 0 Collector to emitter voltage VCEO IC = 2mA, IB = 0 Collector cutoff current Emitter cutoff current Forward current transfer ratio UNR2221 5 UNR2222 UNR2223/2224 1 UNR2221 50 V 50 V 40 UNR2222 hFE VCE = 10V, IC = 100mA UNR2223/2224 50 60 Collector to emitter saturation voltage VCE(sat) IC = 100mA, IB = 5mA Output voltage high level VOH VCC = 5V, VB = 0.5V, RL = 500Ω Output voltage low level VOL VCC = 5V, VB = 3.5V, RL = 500Ω Transition frequency fT VCB = 10V, IE = –50mA, f = 200MHz Input resistance mA 0.25 4.9 0.2 200 UNR2221/2224 V V V MHz 2.2 UNR2222 R1 (–30%) 4.7 0.8 1.0 UNR2223 (+30%) kΩ 10 Resistance ratio UNR2224 R1/R2 1.2 0.22 Note) The part numbers in the parenthesis show conventional part number. 1 Transistors with built-in Resistor UNR2221/2222/2223/2224 Common characteristics chart PT — Ta Total power dissipation PT (mW) 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (˚C) Characteristics charts of UNR2221 IC — VCE VCE(sat) — IC IB=1.0mA Ta=25˚C Collector current IC (mA) 250 0.9mA 0.8mA 200 0.7mA 0.6mA 150 0.5mA 100 0.4mA 0.3mA 50 0.2mA 0.1mA 0 0 2 4 6 8 10 Collector to emitter saturation voltage VCE(sat) (V) 100 IC/IB=10 30 10 3 1 Ta=75˚C 0.3 25˚C 0.1 0.03 –25˚C 12 1 200 25˚C 100 3 10 30 100 300 1 1000 3 IO — VIN 16 12 8 30 100 300 1000 VIN — IO 100 VO=5V Ta=25˚C 3000 30 1000 10 Input voltage VIN (V) f=1MHz IE=0 Ta=25˚C 10 Collector current IC (mA) Collector current IC (mA) Output current IO (µA) Collector output capacitance Cob (pF) Ta=75˚C –25˚C 10000 300 100 30 10 VO=0.2V Ta=25˚C 3 1 0.3 0.1 4 3 0 0.1 0.3 1 3 10 Collector to base voltage 2 300 0 Cob — VCB 20 VCE=10V 0.01 Collector to emitter voltage VCE (V) 24 hFE — IC 400 Forward current transfer ratio hFE 300 30 100 VCB (V) 1 0.4 0.03 0.6 0.8 1.0 1.2 Input voltage VIN (V) 1.4 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 Transistors with built-in Resistor UNR2221/2222/2223/2224 Characteristics charts of UNR2222 IC — VCE VCE(sat) — IC 100 Collector current IC (mA) 250 IB=1.0mA 0.9mA 200 0.8mA 0.7mA 150 0.6mA 0.5mA 100 0.4mA 0.3mA 50 0.2mA 0.1mA IC/IB=10 30 10 3 1 Ta=75˚C 0.3 25˚C 0.1 –25˚C 0.03 VCE=10V 0.01 0 0 2 4 6 8 10 10 3 30 100 100 –25˚C 50 300 1000 1 3 6 4 30 100 300 1000 VIN — IO 100 VO=5V Ta=25˚C 3000 30 1000 10 Input voltage VIN (V) Output current IO (µA) 8 10 Collector current IC (mA) IO — VIN 10000 f=1MHz IE=0 Ta=25˚C 10 25˚C Collector current IC (mA) Cob — VCB 12 Ta=75˚C 150 0 1 12 Collector to emitter voltage VCE (V) Collector output capacitance Cob (pF) hFE — IC 200 Forward current transfer ratio hFE Ta=25˚C Collector to emitter saturation voltage VCE(sat) (V) 300 300 100 30 10 VO=0.2V Ta=25˚C 3 1 0.3 0.1 2 3 0 0.1 0.3 1 3 10 Collector to base voltage 30 0.03 1 0.4 100 VCB (V) 0.6 0.8 1.0 1.2 0.01 0.1 1.4 Input voltage VIN (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2223 IC — VCE VCE(sat) — IC 100 Collector current IC (mA) 200 IB=1.0mA 0.9mA 0.8mA 160 120 0.7mA 0.6mA 0.5mA 80 0.4mA 0.3mA 40 0.2mA 0.1mA hFE — IC IC/IB=10 30 10 3 1 Ta=75˚C 25˚C 0.3 0.1 –25˚C 0.03 0 2 4 6 8 10 Collector to emitter voltage VCE (V) 12 Ta=75˚C VCE=10V 25˚C 150 100 –25˚C 50 0 0.01 0 200 Forward current transfer ratio hFE Ta=25˚C Collector to emitter saturation voltage VCE(sat) (V) 240 1 3 10 30 100 300 Collector current IC (mA) 1000 1 3 10 30 100 300 1000 Collector current IC (mA) 3 Transistors with built-in Resistor UNR2221/2222/2223/2224 Cob — VCB IO — VIN 10000 10 8 6 4 VIN — IO 100 VO=5V Ta=25˚C 3000 30 1000 10 Input voltage VIN (V) f=1MHz IE=0 Ta=25˚C Output current IO (µA) Collector output capacitance Cob (pF) 12 300 100 30 10 VO=0.2V Ta=25˚C 3 1 0.3 0.1 2 3 0 0.1 0.3 1 3 10 Collector to base voltage 30 0.03 1 0.4 100 0.6 0.8 1.0 1.2 0.01 0.1 1.4 Input voltage VIN (V) VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2224 IC — VCE VCE(sat) — IC Ta=25˚C Collector current IC (mA) 250 IB=1.0mA 200 0.9mA 0.8mA 150 0.7mA 0.6mA 0.5mA 100 0.4mA 0.3mA 50 0.2mA 0.1mA Collector to emitter saturation voltage VCE(sat) (V) 100 0 IC/IB=10 30 10 3 1 Ta=75˚C 0.3 25˚C 0.1 0.03 –25˚C 2 4 6 8 10 12 3 –25˚C 50 30 100 300 1 1000 3 6 4 30 100 300 1000 VIN — IO 1000 VO=5V Ta=25˚C 3000 300 1000 100 Input voltage VIN (V) 8 10 Collector current IC (mA) IO — VIN Output current IO (µA) 10 10 10000 f=1MHz IE=0 Ta=25˚C 25˚C 100 Collector current IC (mA) Cob — VCB 12 Ta=75˚C 150 0 1 Collector to emitter voltage VCE (V) Collector output capacitance Cob (pF) VCE=10V 0.01 0 300 100 30 10 VO=0.2V Ta=25˚C 30 10 3 1 2 3 0 0.1 0.3 1 3 10 Collector to base voltage 4 hFE — IC 200 Forward current transfer ratio hFE 300 30 100 VCB (V) 1 0.4 0.3 0.6 0.8 1.0 Input voltage VIN 1.2 (V) 1.4 0.1 0.1 0.3 1 3 10 30 Output current IO (mA) 100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR