AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay AXICOM Telecom-, Signal and RF Relays Reed V23100-V4 Relay 108-98011 • Nov. 07 Rev. C • ECOC: JM10 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice. Index File No. E 111441 Relay Types DIP Version (flat) DIP Version (high) SIL Version Mini SIL Version Contact Data Insulation General Data High Frequency Data All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 4 6 8 10 11 11 11 11 2 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay 1 and 2 pole relays non-polarized, non-latching ROHS compliant (Directive 2002/95/EC) as per product date code 0501. Features Typical applications • • • • • • • • • Direct coil control with TTL-signals possible Highly reliable switching High switching rates Ultrasonic cleanable High vibration and shock resistance Incircuit tester Measuring and control systems Telecom equipment Alarm and security equipment Relay Types DIP version (flat) • Standard version • Electrostatic shield between coil and contact • Protective diode • Electrostatic shield and protective diode • Contact arrangement: 1 form a (1 normally open contact) or 1 form c (1 changeover contact) DIP version (high) • Standard version • Electrostatic shield between coil and contact • Protective diode • Electrostatic shield and protective diode • Contact arrangement: 2 form a (2 normally open contacts) or 1 form c (1 changeover contact) SIL version • Standard version • Protective diode • Contact arrangement: 1 form a (1 normally open contact) Mini SIL version • • • • Standard version Protective diode Standard internal magnetic shield Contact arrangement: 1 form a (1 normally open contact) All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Dimensions Dimensions in mm DIP version (flat) DIP flat version L W H Hb T Tw Tz mm 19.30 - 0.2 6.40 - 0.2 5.70 - 0.2 5.10 - 0.2 3.20 ± 0.1 0.50 ± 0.1 0.25 ± 0.1 inch 0.760 - 0.008 0.252 - 0.008 0.224 - 0.008 0.201 - 0.008 0.126 ± 0.004 0.020 ± 0.004 0.010 ± 0.004 Mounting hole layout Top view Terminal assignment Top view 1 form a standard 1 form a with diode 1 form a with electrostatic shield and diode 1 form c standard 1 form a with electrostatic shield A000 A010 A011 C000 A001 All specifications subject to change. Consult Tyco Electronics for latest specifications. 14 13 9 8 1 2 6 7 4 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Coil Data (values at 23 °C) Nominal voltage Unom Operate/set voltage range Minimum voltage Umin Maximum voltage Umax Vdc Vdc Vdc Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Vdc mW Ω / ± 10 % 0.75 1.80 2.25 3.60 50 144 112 288 500 1000 2000 2000 V23100-V4005-A000 V23100-V4012-A000 V23100-V4015-A000 V23100-V4024-A000 1393763-1 1393763-6 1-1393763-0 1-1393763-4 0.75 1.80 2.25 3.60 50 144 112 288 500 1000 2000 2000 V23100-V4005-A010 V23100-V4012-A010 V23100-V4015-A010 V23100-V4024-A010 1393763-4 1393763-8 1-1393763-2 1-1393763-6 0.75 1.80 2.25 3.60 125 288 112 288 200 500 2000 2000 V23100-V4305-C000 V23100-V4312-C000 V23100-V4315-C000 V23100-V4324-C000 2-1393763-0 2-1393763-8 3-1393763-4 4-1393763-0 50 144 112 288 500 1000 2000 2000 V23100-V4005-A001 V23100-V4012-A001 V23100-V4015-A001 V23100-V4024-A001 1393763-3 1393763-7 1-1393763-1 1-1393763-5 50 144 112 288 200 1000 2000 2000 V23100-V4005-A011 V23100-V4012-A011 V23100-V4015-A011 V23100-V4024-A011 1393763-3 1393763-9 1-1393763-3 1-1393763-7 DIP version flat: 1 form a contact, standard 5 12 15 24 3.5 8.4 10.5 16.8 22 33 44 44 DIP version flat: 1 form a contact, with diode 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 DIP version flat: 1 form c contact, standard 5 12 15 24 3.5 8.4 10.5 16.8 13 (14.5)* 22 (23.5)* 44 (14.5)* 44 (49.0)* DIP version flat: 1 form a contact, with electrostatic shield 5 12 15 24 3.5 8.4 10.5 16.8 22 33 44 44 0.75 1.80 2.25 3.60 DIP version flat: 1 form a contact, with electrostatic shield and diode 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 0.75 1.80 2.25 3.60 * Values in brackets refer to high relay with protective diode Relay Code Digit Block 1 1 2 3 4 5 6 V 2 3 1 0 0 - Block 2 7 8 9 10 11 V 4 Block 3 12 13 14 15 Basic type number of DIL/SIL reed relay Contact arrangement 0 = DIL: 1 form A 3 = DIL: 2 form A or 1 form C 5 = SIL: 1 form A 6 = Mini SIL: 1 form A Coil number 05 = 5 Vdc coil 12 = 12 Vdc coil 15 = 15 Vdc coil 24 = 24 Vdc coil Relay version (contact arrangement) Ordering example: V23100-V4005-A010 DIL reed relay with 1 make, 5 V nominal voltage, with clamping diode (spark suppression) All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Dimensions Dimensions in mm DIP version (high) DIP-high version L W H S T Tw Tz mm 19.30 - 0.2 7.00 - 0.2 7.50 - 0.2 0.50 ± 0.1 3.20 ± 0.1 0.50 ± 0.1 0.25 ± 0.1 inch 0.760 - 0.008 0.276 - 0.008 0.295 - 0.008 0.200 ± 0.004 0.126 ± 0.004 0.020 ± 0.004 0.010 ± 0.004 Mounting hole layout Top view Terminal assignment Top view 2 form a standard 1 form c with diode 2 form a with diode 1 form c with electrostatic shield and diode B000 C010 B010 C011 All specifications subject to change. Consult Tyco Electronics for latest specifications. 6 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Coil Data (values at 23 °C) Nominal voltage Unom Vdc Operate/set voltage range Minimum voltage Umin Maximum voltage Umax Vdc Vdc Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Vdc mW Ω / ± 10 % 0.75 1.80 2.25 3.60 125 288 112 288 200 500 2000 2000 V23100-V4305-B000 V23100-V4312-B000 V23100-V4315-B000 V23100-V4324-B000 1-1393763-8 2-1393763-6 3-1393763-2 3-1393763-8 0.75 1.80 2.25 3.60 125 288 112 288 200 500 2000 2000 V23100-V4305-B010 V23100-V4312-B010 V23100-V4315-B010 V23100-V4324-B010 1-1393763-9 2-1393763-7 3-1393763-3 3-1393763-9 0.75 1.80 2.25 3.60 125 288 112 288 200 500 2000 2000 V23100-V4305-C010 V23100-V4312-C010 V23100-V4315-C010 V23100-V4324-C010 2-1393763-2 3-1393763-0 3-1393763-6 4-1393763-2 200 500 2000 2000 V23100-V4305-C011 V23100-V4312-C011 V23100-V4315-C011 V23100-V4324-C011 2-1393763-3 3-1393763-1 3-1393763-7 4-1393763-3 DIP version high: 2 form a contact, standard 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 DIP version high: 2 form a contact, with diode 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 DIP version high: 1 form c contact, with diode 5 12 15 24 3.5 8.4 10.5 16.8 14.5 23.5 14.5 49.0 DIP version high: 1 form c contact, with diode and electrostatic shield 5 12 15 24 3.5 8.4 10.5 16.8 14.5 23.5 14.5 49.0 0.75 1.80 2.25 3.60 125 288 112 288 UI = Minimum voltage at 23 °C after preenergizing with nominal voltage without contact current UII Maximum continous voltage at 23 °C = The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = KI · UI 23 °C and Ambient temperature tamb [°C] UII tamb = KIl · UIl 23 °C tamb Ambient temperature = UI tamb = Minimum voltage at ambient temperature, tamb UII tamb = Maximum voltage at ambient temperature, tamb kI , kII = Factors (dependent on temperature), see diagram All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Dimensions Dimensions in mm SIL version SIL version L W H T Tw Tz mm 19.80 - 0.2 5.08 - 0.2 7.80 - 0.2 3.50 ± 0.2 0.60 ± 0.1 0.25 ± 0.1 inch 0.780 - 0.008 0.200 - 0.008 0.307 - 0.008 0.138 ± 0.008 0.024 ± 0.004 0.010 ± 0.004 Mounting hole layout Top view Terminal assignment Top view 1 form a standard 1 form a with diode A000 A010 All specifications subject to change. Consult Tyco Electronics for latest specifications. 8 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Coil Data (values at 23 °C) Nominal voltage Unom Vdc Operate/set voltage range Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance mW Ω / ± 10 % Relay code Tyco part number Minimum voltage Umin Maximum voltage Umax Vdc Vdc Vdc 22 33 44 44 0.75 1.80 2.25 3.60 50 144 112 288 500 1000 2000 2000 V23100-V4505-A000 V23100-V4512-A000 V23100-V4515-A000 V23100-V4524-A000 4-1393763-4 4-1393763-7 4-1393763-9 5-1393763-1 0.75 1.80 2.25 3.60 50 144 112 288 500 1000 2000 2000 V23100-V4505-A010 V23100-V4512-A010 V23100-V4515-A010 V23100-V4524-A010 4-1393763-5 4-1393763-8 5-1393763-0 5-1393763-2 SIL version: 1 form a contact 5 12 15 24 3.5 8.4 10.5 16.8 SIL version: 1 form a contact with diode 5 12 15 24 3.5 8.4 10.5 16.8 22 33 44 44 All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Dimensions Dimensions in mm Mini SIL version SIL version mm 15.20 - 0.2 3.80 - 0.2 6.80 - 0.2 0.50 ± 0.1 0.25 ± 0.1 L W H Tw Tz inch 0.780 - 0.008 0.200 - 0.008 0.307 - 0.008 0.024 ± 0.004 0.010 ± 0.004 Mounting hole layout Terminal assignment Top view Top view 1 form a standard 1 form a with diode A000 A010 Coil Data (values at 23 °C) Nominal voltage Unom Operate/set voltage range Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance mW Ω / ± 10 % Relay code Tyco part number Minimum voltage Umin Maximum voltage Umax Vdc Vdc Vdc 13.6 21.6 0.75 1.80 50 205 500 700 V23100-V4605-A000 V23100-V4612-A000 1422026-2 1422026-3 SIL version: 1 form a contact with diode 5 3.5 13.6 12 8.4 21.6 0.75 1.80 50 205 500 700 V23100-V4605-A010 V23100-V4612-A010 1422026-5 1422026-6 Vdc SIL version: 1 form a contact 5 3.5 12 8.4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 10 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay Contact Data Type of relay Type of contact/s DIP version 1 form a 2 form a 1 form c Contact material Mini SIL Version 1 form a 1 form a Ruthenium Maximum continuous current 1A 1.2 A 1A 1A 0.5 A 0.25 A 0.5 A 0.5 A 200 Vdc / Vac peak 200 Vdc / Vac peak 175 Vdc 175 Vdc peak 200 Vdc / Vac 200 Vdc / Vac 200 Vdc / Vac peak 200 Vdc / Vac peak 10 W 10 VA 3W 3 VA 10 W 10 VA 10 W 10 VA 1500 Vdc 250 Vdc 1500 Vdc 225 Vdc Maximum switching current Maximum switching voltage at nominal voltage: 5 Vdc 12-24 Vdc Maximum switching capacity DC voltage AC voltage Initial contact resistance / measuring condition: Electrical endurance at 12 V / 10 mA at 24 V / 400 mA SIL version <150 mΩ 5 x 107 5 x 106 Insulation Insulation resistance at 500 Vdc contact coil > 109Ω Dielectric test voltage (1 min) contact / coil contact / contact 1500 Vdc 250 Vdc 1500 Vdc 200 Vdc High Frequency Data Capacitance between coil and contacts between adjacent contact sets between open contacts max. 2 pF max. 1 pF max. 1 pF General Data Type of relay Type of contact/s Maximum operate time (including bounce) Maximum release time Operating temperature range Storage temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection Mounting position Resistance to soldering heat 1 form a DIP version 2 form a 0.75 ms 0.15 ms 30 G 10 to 2000 Hz 150 G SIL version 1 form c 1 form a 1.1 ms 0.75 ms 1.6 ms 0.15 ms -40 °C ... +85 °C -40 °C ... + 95 °C Approx. 75 K / W 105 °C 30 G 30 G 50 to 2000 Hz 10 to 2000 Hz 50 G 150 G immersion cleanable, IP 67 any 265 °C / 10 s All specifications subject to change. Consult Tyco Electronics for latest specifications. Mini SIL Version 1 form a 0.75 ms 0.15 ms 30 G 10 to 2000 Hz 50 G 11 of 13 AXICOM Telecom-, Signal and RF Relays 108-98011 Rev. C Reed V23100-V4 Relay IM Relays D2n Relays 4th generation slim line – low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x10 mm board space and 11 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. FP2 Relays Other Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x 10 mm board space and 11 mm height. High Frequency Relays HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 … 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. All specifications subject to change. Consult Tyco Electronics for latest specifications. 12 of 13 AXICOM Telecom-, Signal and RF Relays Reed V23100-V4 Tyco Electronics Logistics AG Werk Axicom Au Relay Seestrasse 295 CH-8804 Au-Wädenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: [email protected] 108-98011 Rev. C Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: [email protected] Tyco Electronics EC Trutnov s.r.o. Komenského 821 CZ-541 01 Trutnov / Czech Republic E-mail: [email protected] AXICOM Telecom-, Signal and RF Relays Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752