POWER RELAY 2 POLE—5 A (MEDIUM LOAD CONTROL) VB SERIES RoHS compliant n FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated l Working class: C l UL class B (130°C) insulation l Type of service: continuous duty l Heavy duty miniature slim type power relay l High isolation in small package —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC (between coil and contacts) —Surge strength: 10,000 V l Standard and high sensitivity types available l Flux free type and plastic sealed type available l Lead Free since date code: 0438B9, 0434R - Please see page 8 for more information l To be Di n ORDERING INFORMATION [Example] sc VB – 12 S M B U – 5 (a) (*) (b) (c) (d) (e) (f) (*) (g) on ti (a) Series Name VB:VB Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Coil Type Nil: Standard type (700-750 mW) S : High sensitive type (530 mW) (d) Contact Arrangement M : 2 form A (DPST-NO) T : 2 form C (DPDT) (e) Enclosure B : Flux free type C : Plastic sealed type (with tape) K : Plastic sealed type (f) Standard Nil: TV-rating U : General (non TV-rating) (g) Contact Material N : Nil: 5 : Nil: E : nu ed Silver alloy Silver cadmium oxide (TV-3 rating) Silver cadmium oxide (non TV-rating) Gold overlay silver-nickel (non TV-rating) Silver-nickel (non TV-rating) Actual marking omits the hyphen (–) of (*) 1 VB SERIES n COIL DATA CHART TV-3 RatingStandardNominal Coil resistanceMust operate Must releaseNominal voltage (10%) voltage 5A voltage power VB- 3M( ) VB- 3 ( ) ( ) U-( ) 3 V DC 12.5 Ω 2.1 VDC 0.3 VDC 0.72 W VB- 5M( ) VB- 5( ) ( ) U-( ) 5 V DC 36 Ω 3.5 VDC 0.5 VDC 0.70 W VB- 6M( ) VB- 6( ) ( ) U-( ) 6 V DC 50 Ω 4.2 VDC 0.6 VDC 0.72 W VB- 9M( ) VB- 9( ) ( ) U-( ) 9 V DC 115 Ω 6.3 VDC 0.9 VDC 0.70 W VB- 12M( ) VB- 12( ) ( ) U-( ) 12 V DC 200 Ω 8.4 VDC 1.2 VDC 0.72 W VB- 14M( ) VB- 14( ) ( ) U-( ) 14 V DC 280 Ω 9.8 VDC 1.4 VDC 0.70 W VB- 18( ) ( ) U-( ) 18 V DC 460 Ω 12.6 VDC 1.8 VDC 0.70 W VB- 24( ) ( ) U-( ) 24 V DC 820 Ω 16.8 VDC 2.4 VDC 0.70 W VB- 36( ) ( ) U-( ) Di 36 V DC 1,850 Ω 25.2 VDC 3.6 VDC 0.70 W VB- 48( ) ( ) U-( ) 48 V DC 3,300 Ω 33.6 VDC 4.8 VDC 0.70 W VB- 60( ) ( ) U-( ) 60 V DC 5,100 Ω 42.0 VDC 6.0 VDC 0.70 W 100 V DC 13,400 Ω 70.0 VDC 10.0 VDC 0.75 W 3 V DC 17 Ω 2.1 VDC 0.3 VDC 0.53 W 47 Ω 3.5 VDC 0.5 VDC 0.53 W 6 V DC 68 Ω 4.2 VDC 0.6 VDC 0.53 W 155 Ω 6.3 VDC 0.9 VDC 0.53 W 8.4 VDC 1.2 VDC 0.53 W 9.8 VDC 1.4 VDC 0.53 W 12.6 VDC 1.8 VDC 0.53 W 16.8 VDC 2.4 VDC 0.53 W 25.2 VDC 3.6 VDC 0.53 W Standard Type To VB- 18M( ) VB- 24M( ) VB- 36M( ) be VB- 48M( ) VB- 60M( ) VB-100M( ) VB- 3S( ) ( ) U-( ) VB- 5S( ) ( ) U-( ) VB- 6S( ) ( ) U-( ) VB- 9S( ) ( ) U-( ) VB-12S( ) ( ) U-( ) 12 V DC VB-14S( ) ( ) U-( ) 14 V DC VB-18S( ) ( ) U-( ) 18 V DC VB-24S( ) ( ) U-( ) 24 V DC 1,100 Ω VB-36S( ) ( ) U-( ) 36 V DC 2,450 Ω VB-48S( ) ( ) U-( ) 48 V DC 4,400 Ω 33.6 VDC 4.8 VDC 0.53 W VB-60S( ) ( ) U-( ) 60 V DC 6,800 Ω 42.0 VDC 6.0 VDC 0.53 W VB-100S( ) ( ) U-( ) 100 V DC 18,860 Ω 70.0 VDC 10.0 VDC 0.53 W High Sensitivity Type VB-100( ) ( ) U-( ) sc 5 V DC 9 V DC Note: All values in the table are measured at 20 °C. on 270 Ω 370 Ω 610 Ω ti nu ed VB SERIES n SPECIFICATIONS TV-3 Rating Item Standard Type VB-( ) M VB-( ) M-N VB-( ) U-5 VB-( ) U-N Contact Arrangement 2 form A (DPST-NO) VB-( ) U VB-( )-E 2 form A (DPST-NO) or 2 form C (DPDT) Silver-alloy Gold overlay Silver-alloy SilverSilver Material cadmium cadmium silver-nickel oxide oxide (non gold overlay only VB-E) To Style Single Resistance (initial) (at 1 A 6 VDC) Maximum 100 mΩ Rating (resistive) 5 A 240 VAC/24 VDC Maximum Carrying Current 7A Maximum Switching Power 1,200 VA, 120 W Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current be Di 1 sc 5A 100 mA 5 VDC (VB-M, 5, E) 10 mA 5 VDC (VB-) Minimum Switching Load * Maximum Inrush Current Coil Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Time Value Operate (at nominal voltage) Maximum 15 ms Release (at nominal voltage) Maximum 10 ms Life Mechanical 2 × 107 operations minimum Electrical 1 × 105 operations minimum at rated load Vibration Resistance Shock Resistance Weight on Standard type: 700 to 750mW, high sensitivity type: 530mW Standard type: 350 to 370mW, high sensitivity type: 260mW ti Standard type: –40°C to +65°C, high sensitivity type: –40°C to +75°C (no frost) nu ed 3 × 104 operations minimum 5 × 104 operations minimum at motor load at motor load (1/8HP 120 VAC) (1/8HP 120 VAC) Other 51 A 120 VAC (at lamp load) — 104 5× operations — minimum at lamp load Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Endurance 10 to 55 Hz (double amplitude of 1.5 mm) Misoperation 100 m/s2 (11 ± 1 ms) Endurance 1,000 m/s2 (6 ± 1 ms) Approximately 17 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. *2 IMQ 2 *3 IMQ 0 VB SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 508, 873 E56140 Flammability: UL 94-V0 (plastics) TV-rating 5A, 240VAC/24VDC (resistive) 1/6 HP, 240VAC/120VAC Pilot duty: C150 TV-3 120VAC CSA To VDE C22.2 No. 14 LR 35579 be 5A, 240VAC/24VDC (resistive) 1/6 HP, 240VAC/120VAC Pilot duty: C150 0435, 0631, 0700, 0860 Complies with SEV, SEMKO, CQC, VDE n INSULATION Item Resistance (initial) Dielectric Strength open contacts Di coil and contacts Surge Voltage (coil and contact) sc Note Minimum 1,000 MΩ on at 500 VDC 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC 1 min., (3,000 VAC 1 min. adjacent contacts) ti 10,000 V (6,000V adjacent contacts) n CHARACTERISTIC DATA 1.2 x 50µs standard wave nu ed VB SERIES To be n REFERENCE DATA Di sc on ti nu ed VB SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) VB-M type l PC board mounting hole layout (BOTTOM VIEW) To VB type be VB-MK type (Plastic sealed type) Di sc on ti nu ed VB-K type (Plastic sealed type) Unit: mm VB SERIES VB-MC type (Plastic sealed type with tape) To be VB-C type (Plastic sealed type with tape) Di sc on Unit: mm ti nu ed VB SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l To be Di 2. Recommended Lead Free Solder Profile l sc Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. on ti nu ed We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. VB SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ To be Di ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. sc Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. on ti nu ed