http://www.fujisemi.com YG985C6R FUJI Diode Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25˚C unless otherwise specified.) Item Symbols Repetitive peak reverse voltage VRRM Isolating voltage Viso Average output current - Operating junction temperature Storage temperature IFSM Ratings Units 600 V 1500 V 50Hz Square wave duty =1/2 Tc = 60˚C 20* A Sine wave, 10ms 1shot 50 A Terminals-to-case, AC.1min Io Non-repetitive forward surge current** Conditions Tj - 150 ˚C Tstg - -40 to +150 ˚C Conditions Maximum Units Note* Out put current of center tap full wave connection. Note**Rating per element Electrical characteristics Item (at Ta=25˚C unless otherwise specified.) Symbols Forward voltage*** VF IF =10 A 3.0 V Reverse current*** IR VR =VRRM 30 µA Reverse recovery time*** Thermal resistance trr Rth(j-c) IF =0.1A, IR =0.2A, Irec =0.05A Junction to case 0.028 µS 1.75 ˚C/W Note*** Rating per element Mechanical characteristics Item Mounting torque Approximate mass 1 Conditions Maximum Units Recommended torque 0.3 to 0.5 N•m - 1.7 g YG985C6R FUJI Diode http://www.fujisemi.com Outline Drawings [mm] 6 6 2 YG985C6R FUJI Diode http://www.fujisemi.com Forward Characteristic (typ.) Reverse Characteristic (typ.) 102 Tj=150°C 101 Tj=125°C 10 IR Reverse Current (µA) IF Forward Current (A) Tj=100°C Tj=150°C Tj=125°C Tj=100°C Tj=25°C 1 10 0 10-1 Tj=25°C 10-2 10-3 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 0 2.8 100 200 300 400 500 600 700 VR Reverse Voltage (V) VF Forward Voltage (V) Reverse Power Dissipation (max.) Forward Power Dissipation (max.) 0.035 35 30 DC 360° 360° VR 0.030 I0 α (W) λ 0.025 (W) Reverse Power Dissipation Square wave λ=60° 20 Square wave λ=120° Sine wave λ=180° Square wave λ=180° 15 DC PR WF Forward Power Dissipation 25 10 0.020 α=180° 0.015 0.010 0.005 5 Per 1element 0.000 0 0 2 4 6 IF(AV) Average Forward Current 8 0 10 100 200 VR (A) 3 300 400 Reverse Voltage 500 (V) 600 700 YG985C6R FUJI Diode http://www.fujisemi.com Junction Capacitance Characteristic (typ.) Current Derating (IF(AV)-Tc) (max.) 1000 160 150 140 130 120 100 Junction Capacitance (pF) 100 90 80 70 Cj DC Tc Case Temperature (°C) 110 10 Square wave λ=180° 60 Sine wave λ=180° Square wave λ=120° 50 40 Square wave λ=60° 30 20 0 2 4 6 8 10 12 14 16 18 20 IF(AV) Average Forward Current 22 24 26 1 28 1 (A) λ:Conduction angle of forward current for each rectifier element IF(AV):Forward current of center-tap full wave connection Surge Capability (max.) 100 IFSM Peak Half - Wave Current (A) 1000 10 1 1 10 100 Number of Cycles at 50Hz 4 10 100 VR Reverse Voltage (V) 1000 YG985C6R FUJI Diode http://www.fujisemi.com Transient Thermal Impedance (max.) 2 Transient Thermal Impedance (°C/W) 10 1 10 Rth j-c:1.75℃/W 0 10 -1 10 -3 10 -2 10 -1 0 10 10 t Time 5 (sec) 1 10 2 10 YG985C6R FUJI Diode http://www.fujisemi.com WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6