Part Number: ZM2CR67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT www.SunLED.com LED LAMP PRELIMINARY SPEC Features ●SINGLE COLOR. ●SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. ●AVAILABLE ON TAPE AND REEL. ●IDEAL FOR BACKLIGHTING. ●PACKAGE : 500PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2CR (AlInGaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PT 84 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZM2CR67W Emitting Color Red Published Date : FEB 27,2008 150 Operating Characteristics (TA=25°C) mA mW Emitting Material AlInGaP °C Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.8 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 640 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 25 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 27 pF Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No :SDSA6294 M2CR (AlInGaP) V1 min. typ. 480 995 Wavelength nm λP Viewing Angle 2 θ 1/2 640 90° Checked : B.L.LIU P.1/4 Part Number: ZM2CR67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT www.SunLED.com LED LAMP M2CR Published Date : FEB 27,2008 Drawing No :SDSA6294 V1 Checked : B.L.LIU P.2/4 Part Number: ZM2CR67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT www.SunLED.com LED LAMP Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27,2008 Drawing No :SDSA6294 V1 Checked : B.L.LIU P.3/4 Part Number: ZM2CR67W 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT www.SunLED.com LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 27,2008 Drawing No :SDSA6294 ZM2CR67W V1 Checked : B.L.LIU P.4/4