JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-019 TRANSCEIVER TEST SYSTEM Frequency Range 800-3000 MHz Configuration 11 Port Transceiver Test System (See block diagram 092-6182) Impedance 50 Ohms nominal Attenuation Range 0-63 dB in 1 dB steps VSWR 1.8:1 maximum Attenuation Accuracy (guaranteed monotonic) ± 0.75 dB or 2.5% of programmed (whichever is greater) Insertion Loss 36 dB maximum 27.5 dB typical @ 800 MHz 31.5 dB typical @ 3000 MHz Power Divider Isolation 20 dB minimum RF Input Power 1 Watt average Switching Speed 5 microseconds (after command is received and processed) (3 milliseconds typical processing time) AC Supply 100-240 VAC @ 47-63 Hz Remote Control Ethernet (TCP, 10/100, up to 4 users) Remote Commands Variable Handover Fade Attenuator Set Attenuator Read Attenuator Pause Disconnect Close Identification RF Connector SMA female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-6181 ECR/ECN # Page 1 of 1 DATE 05/14/2009 REV APPR / DATE TRS 05/14/2009 17245 05/21/2009 A TRS 05/21/2009 17601 08/25/2009 B TRS 08/25/2009 ECR/ECN # JFW FORM E-7-F REV F DATE (VHND Av Aw Vx Vy Tz) (FAx y z t) (SAx y) (RAx) (PAUSEx) (DIS) (CLOSE) (IDN) REV APPR / DATE