54ACTQ16374 16-Bit D Flip-Flop with TRI-STATE ® Outputs General Description Features The ’ACTQ16374 contains sixteen non-inverting D flip-flops with TRI-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and Output Enable (OE) are common to each byte and can be shorted together for full 16-bit operation. The ’ACTQ16245 utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series ® features GTO ® output control for superior performance. n Utilizes NSC FACT Quiet Series technology n Guaranteed simultaneous switching noise level and dynamic threshold performance n Buffered Positive edge-triggered clock n Separate control logic for each byte n 16-bit version of the ’ACTQ374 n Outputs source/sink 24 mA n Standard Microcircuit Drawing (SMD) 5962-9452801 Logic Symbol Connection Diagram Pin Assignment for CERPAK DS010935-1 Pin Description Pin Description Names OEn Output Enable Input (Active Low) CPn Clock Pulse Input I0–I15 Inputs O0–O15 Outputs DS010935-2 GTO™ is a trademark of National Semiconductor Corporation. TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT™ and FACT Quiet Series™ are trademarks of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS010935 www.national.com 54ACTQ16374 16-Bit D Flip-Flop with TRI-STATE Outputs September 1998 Functional Description Truth Tables The ’ACTQ16374 consists of sixteen edge-triggered flip-flops with individual D-type inputs and TRI-STATE true outputs. The device is byte controlled with each byte functioning identically, but independent of the other. The control pins can be shorted together to obtain full 16-bit operation. Each byte has a buffered clock and buffered Output Enable common to all flip-flops within that byte. The description which follows applies to each byte. Each flip-flop will store the state of their individual D inputs that meet the setup and hold time requirements on the LOW-to-HIGH Clock (CPn) transition. With the Output Enable (OE n) LOW, the contents of the flip-flops are available at the outputs. When OEn is HIGH, the outputs go to the high impedance state. Operation of the OEn input does not affect the state of the flip-flops. Inputs Outputs CP1 OE1 I0–I7 O0–O7 N L H H N L L L L L X (Previous) H X X Inputs Z Outputs CP2 OE2 I8–I15 O8–O15 N L H H N L L L L L X (Previous) X H X Z H = High Voltage Level L = Low Voltage Level X = Immaterial Z = High Impedance Logic Diagrams Byte 1 (0:7) DS010935-3 Byte 2 (8:15) DS010935-4 www.national.com 2 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source/Sink Current (IO) DC VCC or Ground Current per Output Pin Junction Temperature CDIP Storage Temperature Supply Voltage (VCC) ’ACTQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA): 54ACTQ Minimum Input Edge Rate (dV/dt) ’ACTQ Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V −0.5V to +7.0V −20 mA +20 mA −20 mA +20 mA −0.5V to VCC + 0.5V ± 50 mA 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT™ circuits outside databook specifications. ± 50 mA +175˚C −65˚C to +150˚C DC Electrical Characteristics for ’ACTQ Family Devices Symbol Parameter 54ACTQ TA = −55˚C VCC (V) Units Conditions to +125˚C Guaranteed Limits VIH VIL VOH VOL IOZ Minimum High 4.5 2.0 Input Voltage 5.5 2.0 Maximum Low 4.5 0.8 Input Voltage 5.5 0.8 Minimum High 4.5 4.4 Output Voltage 5.5 5.4 4.5 3.70 5.5 4.70 Maximum Low 4.5 0.1 Output Voltage 5.5 0.1 Maximum TRI-STATE V VOUT = 0.1V V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V IOUT = −50 µA V (Note 2) VIN = VIL or VIH IOH = −24 mA V IOH = −24 mA IOUT = 50 µA V (Note 2) VIN = VIL or VIH IOL = 24 mA 4.5 0.50 5.5 0.50 5.5 ± 10.0 µA IOL = 24 mA VI = VIL, VIH 5.5 ± 1.0 µA VO = VCC, GND VI = VCC, GND Leakage Current IIN Maximum Input Leakage Current ICCT Maximum ICC/Input 5.5 1.6 mA ICC Max Quiescent 5.5 160.0 µA VI = VCC − 2.1V VIN = VCC 50 mA or GND (Note 6) VOLD = 1.65V Max VOHD = 3.85V Min Supply Current IOLD (Note 3) Minimum Dynamic IOHD Output Current VOLP Quiet Output 5.5 50 mA 5.0 0.8 V 5.0 -0.8 V Maximum Dynamic VOL VOLV Quiet Output (Notes 4, 5) Minimum Dynamic VOL (Notes 4, 5) 3 www.national.com DC Electrical Characteristics for ’ACTQ Family Devices (Continued) Note 2: All outputs loaded; thresholds associated with output under test. Note 3: Maximum test duration 2.0 ms; one output loaded at a time. Note 4: Maximum number of outputs that can switch simultaneously is n. (n − 1) outputs are switched LOW and one output held LOW. Note 5: Maximum number of outputs that can switch simultaneously is n. (n − 1) outputs are switched HIGH and one output held HIGH. Note 6: ICC for 54ACTQ @ 25˚C is identical to 74ACTQ @ 25˚C. AC Electrical Characteristics Symbol Parameter VCC (V) (Note 7) 54ACTQ TA = Units −55˚C to +125˚C CL = 50 pF Min fmax Maximum Clock 5.0 Max 65 MHz Frequency tPLH, Propagation Delay tPHL CP to On tPZH, Output Enable Time 5.0 5.0 tPZL tPHZ, Output Disable Time 5.0 tPLZ 3.0 10.5 3.0 10.5 3.0 10.5 3.0 11.5 2.0 9.0 2.0 9.0 ns ns ns Note 7: Voltage Range 5.0 is 5.0V ± 0.5V. AC Operating Requirements Symbol Parameter VCC (V) (Note 8) 54ACTQ TA = Units −55˚C to +125˚C CL = 50 pF Guaranteed Limits tS Setup Time, HIGH or 5.0 3.0 ns 5.0 1.0 ns 5.0 5.0 ns LOW, Input to Clock tH Hold Time, High or LOW, Input to Clock tW CP Pulse Width, HIGH or LOW Note 8: Voltage Range 5.0 is 5.0V ± 0.5V. Capacitance Symbol Typ Units CIN Input Capacitance Parameter 4.5 pF CPD Power Dissipation 95 pF www.national.com 4 Conditions VCC = 5.0V VCC = 5.0V 5 54ACTQ16374 16-Bit D Flip-Flop with TRI-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead CERPAK NS Package Number WA48A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.