61095 GENERAL PURPOSE PNP TRANSISTOR (2N2907A) Features: Applications: • • • • • • • • TO-18 style package Rugged package – able to withstand high acceleration load Hermetically sealed Mil-S-19500 screening available Mii OPTOELECTRONIC PRODUCTS DIVISION Analog switches Digital switches Signal Conditioning Amplifiers DESCRIPTION The 2N2907A is a hermetically sealed metal can general purpose switching transistor. ABSOLUTE MAXIMUM RATINGS Collector-Base Voltage ...............................................................................................................................................................60V Collector-Emitter Voltage............................................................................................................................................................60V Emitter-Base Voltage....................................................................................................................................................................5V Collector Current-Continuous ............................................................................................................................................... 600mA Operating Temperature ........................................................................................................................................ -65°C to +200°C Storage Temperature............................................................................................................................................. -65°C to +200°C Maximum Junction Temperature ...........................................................................................................................................200°C Power Dissipation @ T = 25°C ............................................................................................................................................ 0.4W 1/ Soldering Temperature (vapor phase reflow for 30 seconds) ...............................................................................................215°C A Note: 1. Derate linearly @ 2.28 mw/°C for T > 25°C. A Package Dimensions COLLECTOR Schematic Diagram Ø0.100 [Ø2.54] BASE 3 3 2 0.048 [1.22] 0.028 [0.71] 1 EMITTER 45° 1 [1.17] 0.046 [0.91] 0.036 0.230Ø (5.84) 0.209Ø (5.31) C 3 LEADS 0.195Ø (4.95) 0.021Ø [0.53] 0.016Ø [0.41] 0.178Ø (4.52) 0.210 [5.33] 0.170 [4.32] 0.030 [0.76)] MAX 0.500Ø ([12.70] MAX 0.750Ø [19.05] MIN DIMENSIONS ARE IN INCHES (MILLIMETERS) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 8 - 10 2 E B 61095 GENERAL PURPOSE PNP TRANSISTOR (2N2907A) OPTICAL/ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 60 V IC = 10µA, IE = 0 Collector-Emitter Breakdown Voltage V(BR)CBO 60 V IC = 10mA, IB = 0 2/ Emitter-Base Breakdown Voltage V(BR)CBO 5.0 V IE = 10µA, IC = 0 10 nA VCB = 50V, IE = 0 10 µA VCB = 50V, IE = 0, TA = 150°C Collector-Base Cutoff Current ICBO MAX NOTE Collector-Emitter Cutoff Current ICES 50 nA VCE = 30V Emitter-Base Cutoff Current IEBO 50 nA VEB = 3.5V, IC = 0 - VCE = 10V, IC = 0.1mA - VCE = 10V, IC = 1.0mA - VCE = 10V, IC = 10mA - VCE = 10V, IC = 150mA 1 50 - VCE = 10V, IC = 500mA 1 50 - VCE = 10V, IC = 1.0mA @ -55°C 0.40 V IC = 150mA, IB = 15mA 1 1.60 V IC = 500 mA, IB = 50mA 1 1.30 V IC = 150mA, IB = 15mA 1 2.60 V IC = 500mA, IB = 50mA 1 Forward-Current transfer Ratio hfe1 75 100 450 100 100 Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage VCE (SAT) VBE (SAT) 300 SMALL-SIGNAL CHARACTERISTICS Small Signal Forward Current Transfer Ratio hfe 100 - VCE = 10V, IC = 1mA, f = 1kHz Small Signal Forward Current Transfer Ratio hfe 2.0 - VCE = 20V, IC = 50mA, f =100kHz Open Circuit Output Capacitance COBO 8.0 pF VCB = 10V, 100kHz, < f < 1 MHz Input Capacitance (Output Open Capacitance) CIBO 30 pF VEB = 2.0V, 100kHz, < f < 1 MHz Turn-On Time ton 45 ns VCC = 30V, IC = 150mA, Turn-Off Time toff 300 ns VCC = 30V, I C = 150mA, IB1 = 15mA IB1 = IB2 = 15mA NOTES: 1. Pulse width < 300µs, duty cycle < 2.0%. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 8 -11