Features ■ Accepts POTS lines & coaxial protector ■ Subscriber lockable with Telco override ■ Manufactured from high-impact resistant, ■ Convenient ground attachment ultraviolet-desensitized, flame retardant plastic ■ Optional sealed switching jacks with Insulation Displacement Connectors (IDC) ■ Listed per UL 497 (File: E53117) 7004C Series - Network Interface Device Bourns® Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be configured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management. How To Order 7004C - 0X - X X - XX Model Number Designator Number of Twisted Pairs 0 = None 1 = One 2 = Two Station Protector Options D 1 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) U 3 = 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL,cUL) Z 1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) W 3 = 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL) V 3 = 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL) Q 3 = 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP w/TBU® Protector (UL, cUL) E 2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) Y 2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) R 3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL) T O = Tii355M = No Station Protectors (Not available with DSL configurations) *For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty. Note 3 = Insulation Displacement Connectors (IDC) Special Options H = Security Screw in security plate S = Sealed Switching Jack w/IDC (85122-T-IDC) F = Sealed Switching Jack 4-Post (85122-T4) B = Expansion Bridge w/Binding Posts (85122-B) I = O = N= Coax Protector Options 15 = 1740-15 (150 V±20 % DC Breakdown @ 100 V/Sec) 23 = 1740-23 (230 V±20 % DC Breakdown @ 100 V/Sec) 35 = 1740-35 (350 V±20 % DC Breakdown @ 100 V/Sec) To add lines, use station protector + 85122 Standard Jack 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Expansion Bridge w/IDC (85122-IDC) No options (standard 85122 jack) 90 ° F-connector (85901) 7004C Series - Network Interface Device Installation Diagrams TO GROUND Product Dimensions High Wide Deep 190.5 (7.5) 195.6 (7.7) 69 (2.7) DIMENSIONS: MM (INCHES) RJ11 Subscriber Bridges 85122 Standard Loop Expansion Bridges 85122-T4* Internal Switch - 4 Lugs 85122-IDC* Sealed Switch Jack w/IDC *Includes environmental sealant and closed-cell foam gasket. REV. E 11/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 85122-IDC Insulation Displacement Connectors TR TR 1 2 TR TR 3 4 85122-B Binding Post