80EPF..PbF Soft Recovery Series Vishay High Power Products Fast Soft Recovery Rectifier Diode, 80 A FEATURES/DESCRIPTION The 80EPF..PbF fast soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. Base common cathode 2, 4 Pb-free Available RoHS* COMPLIANT The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. TO-247AC Anode 1 This product series has been designed and qualified for Industrial level and lead (Pb)-free. Anode 3 APPLICATIONS • Output rectification and choppers and converters PRODUCT SUMMARY VF at 40 A < 1.1 V trr 70 ns VRRM 200 to 600 V freewheeling in inverters, • Input rectifications where severe restrictions on conducted EMI should be met MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VRRM IF(AV) VALUES UNITS 200 to 600 V Sinusoidal waveform 80 IFSM A 1000 trr 1 A, - 100 A/µs VF 40 A, TJ = 25 °C TJ Range 70 ns 1.1 V - 40 to 150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA 80EPF02PbF 200 300 80EPF04PbF 400 500 80EPF06PbF 600 700 VOLTAGE RATINGS PART NUMBER 17 ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current SYMBOL TEST CONDITIONS IF(AV) TC = 95 °C, 180° conduction half sine wave 80 10 ms sine pulse, rated VRRM applied 850 10 ms sine pulse, no voltage reapplied 1000 10 ms sine pulse, rated VRRM applied 3610 10 ms sine pulse, no voltage reapplied 5100 t = 0.1 to 10 ms, no voltage reapplied 51 000 IFSM Maximum I2t for fusing I2t Maximum I2√t for fusing I2√t VALUES UNITS A A2s A2√s * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94106 Revision: 05-Jun-08 For technical questions, contact: [email protected] www.vishay.com 1 80EPF..PbF Soft Recovery Series Vishay High Power Products Fast Soft Recovery Rectifier Diode, 80 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop Forward slope resistance VFM rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS VALUES 80 A, TJ = 25 °C TJ = 125 °C TJ = 25 °C 1.25 V 3.5 mΩ 0.85 V 0.1 VR = Rated VRRM TJ = 150 °C UNITS mA 17 RECOVERY CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Reverse recovery time trr IF at 40 Apk 190 ns Reverse recovery current Irr 3.4 A Reverse recovery charge Qrr 25 A/µs 25 °C 0.5 µC Snap factor S IFM trr di dt 0.5 t Qrr IRM(REC) THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS TEST CONDITIONS DC operation UNITS - 40 to 150 °C 0.35 40 Mounting surface, smooth and greased °C/W 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (Ibf · in) Approximate weight Mounting torque VALUES 80EPF02 Marking device Case style TO-247AC 80EPF04 80EPF06 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 94106 Revision: 05-Jun-08 80EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 80 A Vishay High Power Products 180 80EPF.. Series RthJC (DC) = 0.35 K/W 140 130 Ø Conduction angle 120 110 30° 100 120° 60° 90 90° 140 120 80 60 180° Ø 40 Conduction period 20 80EPF.. Series TJ = 150 °C 0 10 0 30 20 40 50 60 70 90 80 0 20 40 60 80 100 120 140 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics 1000 150 80EPF.. Series RthJC (DC) = 0.35 K/W 140 130 Ø Conduction period 120 110 30° 100 60° 90° 90 180° DC 40 60 80 100 120 Peak Half Sine Wave Forward Current (A) 60 Ø 40 Conduction angle 20 80EPF.. Series TJ = 150 °C 30 40 50 60 70 80 90 Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 700 600 500 400 80EPF.. Series 200 0.01 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Document Number: 94106 Revision: 05-Jun-08 100 Maximum non-repetitive surge current versus pulse train duration. 800 300 0 20 10 900 RMS limit 10 80EPF.. Series 1000 80 0 400 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 180° 120° 90° 60° 30° 100 500 1 Fig. 2 - Current Rating Characteristics 120 600 140 Average Forward Current (A) 140 700 200 80 20 Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 800 300 120° 0 At any rated load condition and with rated VRRM applied following surge. 900 Peak Half Sine Wave Forward Current (A) Maximum Allowable Case Temperature (°C) RMS limit 100 80 Maximum Average Forward Power Loss (W) DC 180° 120° 90° 60° 30° 160 Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 150 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions, contact: [email protected] www.vishay.com 3 80EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 80 A Vishay High Power Products Instantaneous Forward Current (A) 1000 100 TJ = 25 °C TJ = 150 °C 10 80EPF.. Series 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 0.22 4.0 IFM = 125 A 0.18 IFM = 40 A IFM = 80 A 0.16 IFM = 20 A IFM = 10 A 0.14 0.12 0.10 0.08 80EPF.. Series TJ = 25 °C 0.06 IFM = 125 A IFM = 80 A 3.0 IFM = 40 A 2.5 2.0 IFM = 20 A 1.5 IFM = 10 A 1.0 0.5 IFM = 1 A 0.04 IFM = 1 A 0 0 40 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25 °C Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C 0.6 14 0.5 12 Qrr - Maximum Reverse Recovery Charge (µC) trr - Maximum Reverse Recovery Time (µs) 80EPF.. Series TJ = 25 °C 3.5 Qrr - Maximum Reverse Recovery Charge (µC) trr - Maximum Reverse Recovery Time (µs) 0.20 IFM = 80 A 0.4 IFM = 40 A 0.3 IFM = 20 A IFM = 10 A 0.2 0.1 IFM = 1 A 80EPF.. Series TJ = 150 °C 80EPF.. Series TJ = 150 °C IFM = 80 A 10 8 IFM = 40 A 6 IFM = 20 A IFM = 10 A 4 2 IFM = 1 A 0 0 0 40 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150 °C Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94106 Revision: 05-Jun-08 80EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 80 A Vishay High Power Products 22 45 IFM = 125 A 80EPF.. Series TJ = 25 °C 18 IFM = 40 A 16 14 IFM = 20 A 12 IFM = 10 A 10 8 6 IFM = 1 A 4 35 IFM = 80 A IFM = 40 A IFM = 20 A IFM = 10 A IFM = 1 A 30 25 20 15 10 5 2 0 0 40 0 ZthJC - Transient Thermal Impedance (K/W) 80EPF.. Series TJ = 150 °C 40 IFM = 80 A Irr - Maximum Reverse Recovery Current (A) Irr - Maximum Reverse Recovery Current (A) 20 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25 °C Fig. 13 - Recovery Current Characteristics, TJ = 150 °C 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 80EPF.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Document Number: 94106 Revision: 05-Jun-08 For technical questions, contact: [email protected] www.vishay.com 5 80EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 80 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 80 E P F 06 PbF 1 2 3 4 5 6 1 - Current rating (80 = 80 A) 2 - Circuit configuration: E = Single diode 3 - Package: P = TO-247AC 4 - Type of silicon: F = Fast diode 5 - 6 - Voltage code x 100 = VRRM None = Standard production 02 = 200 V 04 = 400 V 06 = 600 V PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95223 Part marking information http://www.vishay.com/doc?95226 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94106 Revision: 05-Jun-08 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 N A2 S (Datum B) Ø K M DBM FP1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M Planting (4) E1 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Lead assignments Base metal D DE (c) c1 E C C Diodes 1. - Anode/open 2. - Cathode 3. - Anode (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.37 2.59 3.43 2.59 3.38 0.38 0.86 0.38 0.76 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.094 0.102 0.135 0.102 0.133 0.015 0.034 0.015 0.030 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e FK L L1 N P P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 2.54 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.275 0.209 0.224 1.78 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC outline TO-247 with exception of dimension c Revision: 16-Jun-11 Document Number: 95223 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1