Oscilent Corporation IF SAW Filter | 819-IF380.0M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 819-IF380.0M-A 19 x 6.5 SMD HDR & IMT-2000 May 22 2003 . TYPE : 380.0 MHz Bandpass Filter 4.30 MHz Bandwidth PART NUMBER : 819-IF380.0M-A . Horizontal : 1.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.6 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 379.80 380.00 380.20 MHz Insertion Loss - 20.5 23.0 dB 1dB Bandwidth 4.0 4.02 - MHz 3dB Bandwidth 4.3 4.46 - MHz 40dB Bandwidth - 6.2 6.5 MHz Passband Ripple - 0.70 1.0 dB Group Delay Variation - 120 200 nsec Center Frequency - 1.71 - µsec Ultimate Rejection 40 45 - dB Substrate Material - Quartz - - Ambient Temperature - 25 - °C Phase Linearity - 8.2 12.0 deg Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if380_0a.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 819-IF380.0M-A Page 2 of 2 L1 = 10nH L2 = 15nH C1 = 18pF C2 = 24pF Source/Load Impedance = 50 ohms Part No.: 819-IF380.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if380_0a.htm 12/28/2005