Embedded Power for Business-Critical Continuity Rev. 03.19.08 AD50 Medical Series 1 of 2 AD50 Medical Series RoHS 50 Watts Total Power: Input Voltage: # of Outputs: 50 Watts 90 - 264 VAC single Electrical Specifications Input Special Features • Universal AC input • Fully regulated output • EN61000-3-2 compliant • Input power <74 watts • Overcurrent and overvoltage protection • High efficiency • High MTBF • IEC320 AC input receptacle 3 pin (type C6) - AD5012N3LM 2 pin (type C8) - AD5012N2LM • Built in EMI filter • (CISPR 22 Class B) • AC input fuse • Complies with One Watt Input Energy Star / Blue Angel Requirement • CE Mark EMC & LVD Input range Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current 90-264 Vac (wide range) 47-63 Hz 60A maximum @ 230VAC, cold start 25C° 2 A maximum 80% typical FCC Part 15, Class B & EN55022 (CISPR 22) Class B 300μA maximum@ 50/60 Hz, 264 VAC input - AD5012N3L 100μA maximum@ 50/60 Hz, 264 VAC input - AD5012N2L Output Maximum Power (Po) Hold-up time Overvoltage protection Overcurrent protection Thermal protection Cable/connector 50 W 17 ms. minimum at full load @ 100 Vac, 47 Hz 16 - 20 V Latching type, recycle AC to reset. Output short circuit protection auto recover Overload protection @ 110 - 120% above maximum rating 105° to 120°C Trip point; output will latch off DC cable length 2.5 mm center plug DC plug center +v DC plug outer -v Environmental Specifications Safety CSAUL CSA VDE CE Mark UL 60601-1 60601-1 60601-1 LVD and EMC Operating temperature: 5° to +40°C ambient Storage temperature: Electromagnetic susceptibility: -40°C to +70°C Designed to meet EN61000-4-2, -4, -5, level 4; EN61000-4-3, -6, 10v/m; EN61000-4-8, -11; EN61000-3-3 and EN61000-3-2 Class A Humidity: Operating; non-condensing 10% to 90% RH MTBF demonstrated: >300,000 hours at full load and 25°C ambient conditions Embedded Power for Business-Critical Continuity Americas Ordering Information Model Number AD5012N3LM AD5012N2LM Maximum Power 50 W 50 W Output Voltage 12 Vdc 12 Vdc Maximum Load 4.16 A 4.16 A Peak Load1 Regulation2 6A 6A ±5% ±5% Ripple P/P (PARD)3 <500 mV <500 mV 1. Peak current lasting 200ms every 3 seconds. 2. At 25ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20MHz bandwidth and 10μF (tantalum capacitor) in parallel with a 0.1μF capacitor at rated line voltage and load ranges. 1.61˝ (41) Mechanical Drawing Rev. 03.19.08 AD50 Medical Series 2 of 2 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com 0.4˝ (10.5) 4.72˝ (120) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 48˝ (1219 ±20) C8 techsupport.embeddedpower @emerson.com C6 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02" (±0.5mm) 3. Warranty: 2 year 4. Weight: 0.61 lb./ 0.28 kg 5. AC input power cord sold separately. 6. Specifications at factory settings at 115VAC input, 25°C unless otherwise stated 7. AC Input Connector: IEC320, C6 or C8 Monitoring 2.56˝ (65) Notes: Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co.