2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APKA2810PBC/A-F01 BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description ●2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm The Blue source color devices are made with InGaN on SiC THICKNESS. Light Emitting Diode. ●LOW POWER CONSUMPTION. Static electricity and surge damage the LEDS. ●IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic ●VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. ●PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(±0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG0882 REV NO: V.4 DATE: MAY/04/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 1204000614 Selection Guide Dice Part No. APKA2810PBC/A-F01 Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 36 70 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG0882 REV NO: V.4 DATE: MAY/04/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 1204000614 Blue APKA2810PBC/A-F01 SPEC NO: DSAG0882 REV NO: V.4 DATE: MAY/04/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 1204000614 APKA2810PBC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG0882 REV NO: V.4 DATE: MAY/04/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 1204000614 PACKING & LABEL SPECIFICATIONS APKA2810PBC/A-F01 SPEC NO: DSAG0882 REV NO: V.4 DATE: MAY/04/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 1204000614