4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION APKA4110MBC BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. Description The Blue source color devices are made with GaN on SiC zLOW POWER CONSUMPTION. Light Emitting Diode. zIDEAL FOR BACKLIGHT AND INDICATOR It is recommended to use a wrist band or zPACKAGE: 2000PCS/REEL. All devices, equipment and machinery must be electrically zWIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. zVARIOUS COLORS AND LENS TYPES AVAILABLE. anti-electrostatic glove when handling the LEDs. zRoHS COMPLIANT. grounded. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: DSAD1198 REV NO: V.3 DATE: JUL/04/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000248-01 Selection Guide Part No. Dice APKA4110MBC Iv (mcd) @ 20mA Lens Type BLUE (GaN) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 4 12 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1198 REV NO: V.3 DATE: JUL/04/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000248-01 Blue APKA4110MBC SPEC NO: DSAD1198 REV NO: V.3 DATE: JUL/04/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000248-01 APKA4110MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1198 REV NO: V.3 DATE: JUL/04/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000248-01 PACKING & LABEL SPECIFICATIONS APKA4110MBC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1198 REV NO: V.3 DATE: JUL/04/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000248-01