SGC101BSA Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 10A Features • • • • • • • • • Schottky barrier diodes Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile - typical height of 1.1 mm Heatsink design High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGC (TO‐277) Anode 1 Cathode & Heatsink Anode 2 Typical Applications For low voltage high frequency inverters, DC/DC converters and polarity protection application. Maximum Ratings g ((TA = 25 °C unless otherwise noted)) Parameter Symbol SGC101BSA Unit Maximum repetitive peak reverse voltage VRRM 100 V Maximum RMS voltage VRMS 70 V VDC 100 V Maximum DC blocking voltage 1) IF(AV) ( ) 5.0 IF(AV)2) 10.0 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 220 A Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Maximum average forward rectified current Electrical Characteristics Parameter Instantaneous forward voltage (TA = 25 °C unless otherwise noted) Test Conditions Symbol TYP. MAX. IF=1A 0.38 - IF=2A 0.41 - IF=5A TA=25℃ VF IF=10A VR=80V Instantaneous reverse current VR=100V Typical thermal resistance Unit 0.47 - 0.54 0.65 TA=125℃ 0.50 0.60 TA=25℃ 14.9 - uA TA=125℃ 9.6 - mA 29.5 500 uA 15.2 50 mA IF=10A Typical junction capacitance A TA=25℃ TA=125℃ 4.0 V, 1 MHz juntion to ambient juntion to mount IR CJ Volts 1.35 nF RθJA 1) 75 ℃/W RθJM 2) 1 ℃/W Notes1)Thermal resistance RθJA is junction to ambient. Free air,mounted on P.C.B with recommended copper pad area,2 OZ,FR4 2)Thermal resistance RθJM is junction to mount.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2015.07-Rev.A SGC101BSA Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 10A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Maximum Non‐Repetitive Peak Forward Surge Current Figure 2. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Junction Capacitance Notes 1) Mounted on P.C.B with 30*30mm copper pad area 2) Fre air, Mounted on recommended copper pad area FR4 PCB(RθJA=76℃/W) Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2015.07-Rev.A SGC101BSA Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 10A Package Outline Dimensions DIM HE E D B1 B2 A C L L1 L2 L3 D1 E1 Unit: mm Unit: inch MIN MAX 6.4 6.6 5.6 5.8 4.1 4.3 1.7 1.9 0.8 1 1.05 1.2 0.3 0.4 0.85 1.1 4.2 4.4 3.52 Typ. 1.1 1.4 3 3.3 1.86 Typ. MIN MAX 0.252 0.260 0.220 0.228 0.161 0.169 0.067 0.075 0.031 0.039 0.041 0.047 0.012 0.016 0.033 0.043 0.165 0.173 0.139 Typ. 0.043 0.055 0.118 0.130 0.073 Typ. Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2015.07-Rev.A SGC101BSA Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 10A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, materials including product data, data diagrams, diagrams charts, charts programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, li bilit or other liability, th loss l rising i i f from these th inaccuracies i i or errors. Please Pl also l pay attention tt ti to t information i f ti published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, p g g y charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.07-Rev.A