PF27/P2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 2A Features • • • • • • • Glass passivated fast recovery rectifiers Heatsink structure Low profile, typical thickness 0.8mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s iSGA (SOD-123HS) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol PF27/P2F7 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) 1000 V 700 V 1000 V 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A I2t 15.0 A2sec TJ, TSTG - 55 to + 150 °C Rating for fusing(t＜8.3ms) Operating junction and storage temperature range Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Maximum instantaneous forward voltage IF=2 A,TA=25℃ Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery IR Unit 1.3 V 1 50 µA trr 250 nS CJ 10 pF junction to ambient RθJA 90 juntion to case RθJC 25 juntion to lead RθJL 18 time Irr=0.25A Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance1) VF PF27/P2F7 ℃/W Note:1),The thermal resistance from junction to ambient,case or lead,mounted on FR-4 P.C.B www.goodark.com 1/4 2015.06-Rev.A PF27/P2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 2A Ratings and Characteristics Curves Peak Forward Surge Current （A） (TA = 25℃ unless otherwise noted) 60 Ta=25℃ 8.3ms single half sine-wave 50 40 30 20 10 0 1 10 100 Number of Cycles at 60Hz Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2015.06-Rev.A PF27/P2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 2A Package Outline Dimensions iSGA Package Unit:mm MIN MAX A 0.75 0.90 B 0.85 1.05 B1 0.85 1.05 C 0.1 0.25 D 1.9 2.1 E 2.9 3.1 L1 2.0 2.45 L2 0.4 0.85 L3 1.3 1.7 HE 3.5 3.9 Soldering footprint Packing Information Packing quantities: Reel size 7" Quantity/reel 3K Quantity/inner Box 30K Quantity/Carton 120K Packing Tape Specification www.goodark.com 3/4 2015.06-Rev.A PF27/P2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.06-Rev.A