SGC61A thru SGC67A/SGC0601A thru SGC0607A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 6A Features • • • • • • • Glass passivated standard rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile - typical height of 1.1 mm eSGC ((TO‐277) ) Anode 1 Cathode & Heatsink Anode 2 Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, li and d other th consumer applications. li ti Maximum Ratings Parameter (TA = 25 °C unless otherwise noted) Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current SGC61A SGC62A SGC63A SGC64A SGC65A SGC66A SGC67A SGC0601A SGC0602A SGC0603A SGC0604A SGC0605A SGC0606A SGC0607A Unit VRRM 50 VRMS VDC IF(AV)1) IF(AV)2) 35 70 140 280 420 560 700 V 50 100 200 400 3.0 600 800 1000 V 100 200 400 600 800 1000 V A 6.0 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 180 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Symbol Instantaneous IF=6 A ,TA=25℃ forward voltage TA=25℃ Maximum DC reverse current at rated DC blocking voltage TA=125℃ Typical reverse recovery time IF=0.5A,IR=1.0A, Irr=0.25A Typical junction 4.0 V, 1 MHz capacitance Typical thermal resistance juntion to ambient juntion to mount (TA = 25 °C unless otherwise noted) SGC61A SGC62A SGC63A SGC64A SGC65A SGC66A SGC67A SGC0601A SGC0602A SGC0603A SGC0604A SGC0605A SGC0606A SGC0607A TYP:0.94; VF MAX:1.1 Unit Volts 10 µA IR 250 trr 4 uS CJ 35 pF RθJA 1) 72 ℃/W RθJM 2) 5 ℃/W Notes: 1)Thermal resistance RθJA is junction to ambient. Free air,mounted on P.C.B with recommended copper pad area,2 OZ,FR4 2)Thermal resistance R θJM is junction to mount.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2014.03-Rev.A SGC61A thru SGC67A/SGC0601A thru SGC0607A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 6A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1. Typical Instantaneous Forward Characteristics Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance 1) Mounted on P.C.B with 30*30mm copper pad area 2) Fre air, Mounted on recommended copper pad area FR4 PCB(RθJA=72℃/W) Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2014.03-Rev.A SGC61A thru SGC67A/SGC0601A thru SGC0607A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 6A Package Outline Dimensions Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.03-Rev.A SGC61A thru SGC67A/SGC0601A thru SGC0607A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 6A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, materials including product data, data diagrams, diagrams charts, charts programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility ibilit for f any damage, d liability, li bilit or other th loss l rising i i f from these th inaccuracies i i or errors. Please Pl also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, g p g g diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-Rev.A