2 edition nd Motor-Control Solutions From MOSFETs to MCUs, Sensors, Bipolar transistors and Schottky diodes NXP Standard Products: we offer you a solu tion for every Motor-Control device Motor-control at a glance Content Industry 4.0 is only one aspect of a changing industrial landscape. Evolving applications like e-bikes and power tools raise the demand for highly efficient and reliable parts. At the same time, industrial designers face the challenge of creating motor-control platform designs that combine the flexibility to adapt quickly to different types of motors with the high accuracy needed to guarantee performance in the most rugged systems. To meet these new requirements, companies and hardware engineers need to adapt and develop their designs, products, and processes. Motor-control devices need to become progressively smaller and more efficient, to support the industrial transfer to a real Industry 4.0. NXP supports these trends by securing the interfaces, increasing the flexibility and design speed of the control stage, and reducing the size of the power stage while also increasing its power density. } Introducing Standard Products........................................................................................................ p 2 } Application cross-reference...............................................................................................................p 5 } Motor types....................................................................................................................................................p 6 - Brushed DC motors..........................................................................................................................p 6 - Brushless DC motors.......................................................................................................................p 8 - Permanent-magnet synchronous motors (PMSM)................................................... p 10 - Induction motors............................................................................................................................. p 12 - Stepper motors................................................................................................................................. p 14 LOGIC ESD PROTECTION DISCRETES } Microcontrollers........................................................................................................................................ p 16 } Logic Solutions.......................................................................................................................................... p 19 } Magnetic Position Sensor.................................................................................................................. p 21 Control Stage MCU Power Stage Power MOSFETs } Bipolar transistors and Schottky diodes.................................................................................p 22 } Power Solutions........................................................................................................................................ p 24 SENSORS Our portfolio of Standard Products has become a key driver in the industrial transition to a greener and smarter world, and is already present in countless applications. From MOSFETs, diodes, and transistors to ESD/TVS and logic, we have a complete portfolio of products to cover your industrial needs. NXP’s LPC1500 microcontrollers are optimized for fast, easy, and high-precision motor-control. These new microcontrollers incorporate all the features required for high-accuracy sensored and sensorless motor-control, enabling simultaneous control of two motors in highly flexible configurations. Supported by ultra-efficient motor-control firmware, easy-to-use GUI-based tuning tools, and two new motor-control solution kits, LPC1500 microcontrollers simplify evaluation and development of motor-control applications without requiring deep motor-control experience. 2 Motor-control brochure Motor-control brochure 3 NXP’s Standard Products Application cross-reference NXP’s Standard Products produces a staggering 70 billion devices a year and is part of the daily life of billions of people around the globe. Our portfolio consists of a large variety of catalog products, based on widely-known production techniques and offering characteristics that are largely standardized throughout the industry. The portfolio also includes leading discrete solutions, especially in the areas of ESD protection/EMI filtering, low-loss rectification, and power switching. Refer to each section of this guide for details on recommended types. Motor types Market PowerMOS Vehicles Application/ Motor types Brushed DC motors Brushless DC motors √ √ Electric pallet trucks √ √ Golf buggies √ Personnel carriers √ √ Utility vehicles √ √ Street sweepers √ Based on a unique copper-clip construction, NXP’s LFPAK56 packages are designed to share e-bikes √ current and spread heat evenly over the die, while LFPAK33 packages provide the benchmark Electric wheelchairs √ performance in a low-resistance small-footprint package. Our D2PAK and TO220 packages have Mobility scooters √ enhancements, such as thicker bond wires and multiple stitches, combined with inherently robust Floor cleaners √ Golf cart Leisure Stepper motors √ e-scooters standard footprint. Induction motors Forklift Not all power MOSFETs are the same. NXP power MOSFETs are designed and built differently. silicon to deliver low on-state resistance and high current-carrying capability within an industry Permanent magnet synchronous motors √ √ √ Electric toys √ √ Model planes √ √ Strimmers/hedge cutters √ √ Lawn mowers √ √ Cordless drills √ √ Cordless screwdrivers √ Garden DIY Large White Goods Home √ Window controls/curtains √ Cordless/robot vacuum cleaners √ Window vacs √ Cordless food mixers √ Low voltage bathroom fans √ √ √ Printers √ Office Computer fans √ Machine tools Hospital beds √ Floor polishers (with vacuum) √ Professional cordless tools √ Drones 4 Motor-control brochure √ √ √ √ Motor-control brochure 5 Brushed DC Motors A typical brushed motor from a power tool can be controlled by a simple PWM speed controller. Four MOSFETs are required for bidirectional operation. Key features and benefits B rushed motors are almost universal in battery-powered applications S peed control is usually achieved by pulse-width modulation (PWM) N XP’s TO220 NextPower Cordless devices handle up to 150 A T hey have low leakage for extended battery life E xcellent avalanche ruggedness C hoice of logic- or standard-level gate drive to suit each application Large peak currents are generated during start-up and stall conditions NXP’s NextPower Cordless MOSFETs are specifically aimed at motor-control applications. They are enhanced with thicker wires and multiple bond points, to carry high stall currents. NextPower Cordless RDSon[max] RDSon[max] @ V GS = 10 V (mΩ) @ V GS = 4.5 V (mΩ) ID [max] (A) EAS at rated current [mJ] Package Gate threshold 2.63 100 151 LFPAK56 Logic Level 2 3.5 100 370 LFPAK56 Logic Level 30 2.4 3.16 100 103 LFPAK56 Logic Level PSMN2R6-30YLC 30 2.8 3.65 100 50 LFPAK56 Logic Level PSMN1R9-40PL 40 1.7 1.94 150 1008 TO220 (SOT78) Logic Level PSMN2R1-40PL 40 2.2 2.6 150 622 TO220 (SOT78) Logic Level PSMN1R5-40PS 40 1.6 - 120 1400 TO220 (SOT78) Standard Level PSMN2R2-40PS 40 2.1 - 100 1240 TO220 (SOT78) Standard Level PSMN2R5-60PL 60 2.6 3.15 150 655 TO220 (SOT78) Logic Level PSMN2R6-60PS 60 2.9 - 150 519 TO220 (SOT78) Standard Level PSMN3R3-60PL 60 3.4 3.8 130 404 TO220 (SOT78) Logic Level PSMN3R9-60PS 60 3.9 - 130 372 TO220 (SOT78) Standard Level PSMN4R2-60PL 60 4.3 4.3 130 372 TO220 (SOT78) Logic Level PSMN7R6-60PS 60 7.8 - 92 110 TO220 (SOT78) Standard Level Device Name VDS(V) PSMN2R0-30YL 30 2 PSMN2R0-30YLE 30 PSMN2R5-30YL Brushed motors are a well-established technology for power tools, cordless home appliances, and electronic toys. Application areas P ower tools encompass everything from small screwdrivers to heavy-duty saws and garden equipment, while home appliances range from handheld food mixers to cordless vacuum cleaners T hese applications present a wide variety of requirements for driving the motor, but they all need high current capability and the ability to withstand stall conditions and other kinds of abuse 6 Motor-control brochure Motor-control brochure 7 Brushless DC Brushless DC (BLDC) refers specifically to a group of motors where the supply to the windings is switched by MOSFETs rather than by a commutator. Key features and benefits B LDC motors are compact and powerful T hey can be designed to run at very high speed and power or to provide high torque at low RPM T he absence of brushes gives them long life and high reliability E liminating friction from the brushes makes them efficient R elatively simple electronics are required and can easily incorporate speed control NXP’s LFPAK56 portfolio gives industry-leading performance in a truly innovative package. 100% compatible with industry-standard Power-SO8 footprints, the copper source clip shares the current over the die while at the same time spreading the heat evenly among the cells. The LFPAK56’s exposed leads offer extra benefits in terms of increased reliability and the option of wave soldering and automatic optical inspection. 40 to 60 V N-channel MOSFETs Package name LFPAK devices are recommended for high volume consumer goods requiring a compact, yet powerful motor with high level of automated assembly. Application areas BLDC ‘outrunner’ motors have their rotors on the outside and the winding in the middle. This gives them plenty of low-speed torque and they are ideal for e-bikes, scooters, and quadra-copters PCB mounted MOSFETs simplify heatsinking and facilitates highly automated manufacturing and test LFPAK devices set the benchmark for a low-resistance, small-footprint package VDS [max] [V] RDSon[max] @ 10 V (mΩ) ID [max] (A) QG(tot) [typ] (nC) PSMN1R0-40YLD 40 1.1 100 54 PSMN1R4-40YLD 40 1.4 100 45 PSMN1R6-40YLC 40 1.55 100 59 PSMN1R8-40YLC 40 1.8 100 45 PSMN2R6-40YS 40 2.8 100 63 PSMN3R3-40YS 40 3.3 100 49 PSMN4R0-40YS 40 4.2 100 38 PSMN5R8-40YS 40 5.7 90 28.8 PSMN8R3-40YS 40 8.6 70 20 PSMN014-40YS 40 14 46 12 PSMN011-60ML 60 11.3 61 37.2 PSMN011-60MS 60 11.3 61 23 PSMN4R0-60YS 60 4 100 56 PSMN5R5-60YS 60 5.2 100 56 PSMN7R0-60YS 60 6.4 89 45 PSMN8R5-60YS 60 8 76 39 PSMN012-60YS 60 11.1 59 28.4 PSMN017-60YS 60 15.7 44 20 Type number Types in red represent new products 8 Motor-control brochure Motor-control brochure 9 Permanent-magnet synchronous m otors Permanent-magnet synchronous motors (PMSM) are used for high-performance and high efficiency motor drives, characterized with smooth rotation over the entire speed range of the motor with the help of a position feedback sensor The NXP D2PAK portfolio is ideally suited to heavy-duty motor-control applications. LFPAK devices are available for space-constrained designs. 80 to 100 V N-channel MOSFETs Key features and benefits Ideal for high-performance servo applications Package name A close relative of the BLDC motor Controlled with synthesized sinusoidal waveforms Smooth rotation without torque ripple Smaller, lighter, and more efficient than an AC induction motor D2PAK (SOT404) PMSM motors are commonly used in industrial automation for traction, robotics, and aerospace, where greater processor power is required. Application areas These motors are popular as traction motors in electric and hybrid vehicles An emerging application is in direct-drive washing machines Smooth rotation makes them suitable for automotive electric power steering When fitted with position encoders, they are ideal for machining tools Absence of torque ripple makes them good for disc-drive data storage TO-220AB (SOT78A) Motor-control brochure QG(tot) [typ] (nC) 3 120 139 80 3.5 120 111 PSMN4R4-80BS 80 4.5 100 125 PSMN5R0-80BS 80 5.1 100 101 PSMN6R5-80BS 80 6.9 100 71 PSMN8R7-80BS 80 8.7 90 52 PSMN012-80BS 80 11 74 36 PSMN3R8-100BS 100 4.8 120 196 PSMN4R8-100BSE 100 4.8 120 196 PSMN4R8-100PSE 100 5 120 196 PSMN7R8-100PSE 100 7.8 75 128 RDSon[max] [max] [V] @ 10 V (mΩ) PSMN2R8-80BS 80 PSMN3R3-80BS Types with ‘E’ suffix have an enhanced Safe Operating Area characteristic KMZ60 Angle sensor with integrated amplifier Type number KMZ60 10 ID [max] (A) VDS Type number Package Description Accuracy Angle Range Operating Temperature Output voltage Supply voltage S08 Magnetic Angel Sensor ± 1° degree 0-180° degree -40 - 150 C° degree 0.07 - 0.93 Vcc 2.7 - 5.5 V Motor-control brochure 11 Induction motors Induction motors are designed to work with three-phase AC motors. Their rotors are usually cast from aluminium. Key features and benefits Induction motors are the workhorse of industry Low-voltage versions have applications in battery-powered vehicles They require a synthesized 3-phase AC waveform and have a stator winding similar to PMSM motors They do not have permanent magnets but rather induce a magnetic field in the rotor by transformer action Induction motors are well-established in industrial applications. They are the motor of choice in rugged, hard-working conditions. Over the last few years, manufacturers have moved from DC control systems to AC. These systems offer several advantages: The AC motor can be made much smaller than its equivalent DC counterpart The motors don’t have any parts to wear out The motor uses regenerative braking, which prevents the brake pads from wearing out as quickly Kinetic energy is used to recharge the battery The increased efficiency increases the shift time per battery charge by as much as 25% 12 Motor-control brochure The D2PAK portfolio is well suited to heavy-duty motor-control applications. NXP’s devices, with their inherently robust silicon and a large Safe Operating Area (SOA), deliver low on-state resistance and excellent thermal performance within an industry-standard footprint. 80 V N-channel MOSFETs Package name D2PAK (SOT404) ID [max] (A) QG(tot) [typ] (nC) 3 120 139 80 3.5 120 111 PSMN4R4-80BS 80 4.5 100 125 PSMN5R0-80BS 80 5.1 100 101 PSMN6R5-80BS 80 6.9 100 71 PSMN8R7-80BS 80 8.7 90 52 PSMN012-80BS 80 11 74 36 PSMN017-80BS 80 17 50 26 PSMN050-80BS 80 46 22 11 VDS RDSon[max] [max] [V] @ 10 V (mΩ) PSMN2R8-80BS 80 PSMN3R3-80BS Type number Motor-control brochure 13 Stepper motors With a stepper motor, a full revolution is divided into a number of equal steps. The motor’s position can be commanded to move and hold at one of these steps without a feedback sensor. Key features and benefits Stepper motors are attractive because they can be controlled directly by microcontrollers Step angles range from 1.8° to 90° Torques vary from a few uNm for instrument pointer motors to 40 Nm for machine-tool motors In light of ever-increasing pressure to reduce the size of modules while at the same time increasing module functionality, LFPAK33 provides the benchmark in a low-resistance, small-footprint package. The LFPAK33 brings NXP’s robust and reliable copper-clip technology to the DFN/QFN3333 footprint. 60 V N-channel MOSFETs Package name Stepper motors are frequently used for precision positioning in equipment such as disc drives and computer printers. Application areas Commercially, stepper motors are used in floppy disk drives, flatbed scanners, computer printers, plotters, slot machines, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines, and, more recently, 3D printers Other uses are in packaging machinery and positioning of valve pilot stages for fluidcontrol systems 14 Motor-control brochure ID [max] (A) QG(tot) [typ] (nC) 11.3 61 37.2 60 11.3 61 23 PSMN5R5-60YS 60 5.2 100 56 PSMN7R0-60YS 60 6.4 89 45 PSMN8R5-60YS 60 8 76 39 PSMN012-60YS 60 11.1 59 28.4 PSMN017-60YS 60 15.7 44 20 PSMN030-60YS 60 24.7 29 13 VDS RDSon[max] [max] [V] @ 10 V (mΩ) PSMN011-60ML 60 PSMN011-60MS Type number Types in red represent new products Motor-control brochure 15 Microcontrollers LPC1500 series NXP LPC1500 - Motion-control ‘simplified’ PART ORDER NUMBER FLASH (kB) SRAM (kB) LPC1549JBD100E The new NXP Cortex LPC1500 Optimized for fast, easy, high-precision motor-control of sensored/sensorless brushless DC (BLDC) and permanentmagnet synchronous motors (PMSM) in markets such as: LPC1549 - Consumer (large home appliances) - Commercial (HVAC/elevator/escalator control) - Industrial (Pumps/generators) - Also ideal for digital power supplies, and more LPC1547 LPC1549JBD64QL 256 36 LPC1549JBD48QL LPC1548JBD100E LPC1548 128 PACKAGE USB 100LQFP USB 64LQFP USB 48LQFP USB 100LQFP USB 64LQFP USB 64LQFP USB 48LQFP 20 LPC1548JBD64QL LPC1547JBD64QL 64 USB 12 LPC1547JBD48QL LPC1519JBD100E LPC1519 100LQFP 256 36 - LPC1519JBD64E 64LQFP LPC1518JBD100E LPC1518 100LQFP 128 20 - LPC1518JBD64E 64LQFP LPC1517JBD64E LPC1517 64LQFP 64 12 LPC1517JBD48E 48LQFP NXP LPC1500 - Everything you need to simplify Motion-control DEVELOPMENT & DEMO TOOLS LPC1500 block diagram Two 12-bit, 12-channel, 2 Msps ADCs Quadrature encoder interface Hardware interconnection between SCTimer/ PWM, ADCs, and comparators ADC triggered by SCTimer/PWM Comparator can shut down the SCTimer/PWM 500 ns ADC conversion time 68 ns propagation delay comparators Four high-precision SCTimer/PWM modules Average PWM resolution <1 ns 72 MHz Cortex-M3 CAN module for industrial connectivity USB optional 16 Motor-control brochure LPCXpresso Board OM13056 LPC1549 LPCXpresso board Development board http://www.nxp.com/demoboard/OM13056. html BLDC motor-control Kit OM13068 Sensored motor-control http://www.nxp.com/demoboard/OM13068. html PMSM motor-control Kit OM13067 Sensored and sensorless motor-control solution http://www.nxp.com/demoboard/OM13067. html Keit MCB1549 Eval Board OM13064 Keil Evaluation board http://www.nxp.com/demoboard/OM13064. html - LPC Software Platform http://www.lpcware.com/content/device/ lpc15xx LPCXpresso IDE LPCXpresso IDE v6 C/C++ development suite www.nxp.com/lpcxpresso/home LPCQuickDrive - Sensored/Sensorless FOC MC Software www.lpcware.com/motorcontrol LPCMotorCal - GUI Calibration Tool www.lpcware.com/motorcontrol LPCOpen Motor-control brochure 17 Microcontrollers PMSM motor-control solution OM13067. Demonstrates Field-Oriented Control (FOC) motor-control functionality. Sensored and sensorless control for PMSM Logic solutions Commitment and innovation Over the last 50 years, the NXP logic business has supported growing global demand for logic products. motors. Today, as the No. 1 volume logic supplier in the world, NXP offers a broad variety of industry-leading LPC1549 solution includes: solutions – at the exceptionally high levels of quality demanded by the automotive and military industries. We LPC1500 motor-control Kit continually invest in new process and package technologies, as well as new packaging facilities, to extend our PMSM motor leading-edge portfolio and support high-volume mobile requirements. LPC QuickDrive firmware FOC firmware for BLDC and PMSM motors available on LPCWare.com Schmitt triggers LPC MotoCal GUI-based calibration tool Cables, Quick-Start Guide Type number BLDC motor-control solution. Demonstrates trapezoidal BLDC motor-control functionality. NXP LPC1549 with two 2 Msps 12 b ADCs, four SCTimer/PWM modules, four comparators (68 ns) LPC1500 motor-control Kit BLDC motor LPC QuickDrive firmware Description VCC (V) Tamb (Cel) 74HC132 Quad 2-input NAND gate Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT132 Quad 2-input NAND gate Schmitt trigger; TT- enabled 4.5 to 5.5 -40 to +125 74HC14 Hex inverter Schmitt trigger 2.0 to 6.0 -40 to +125 74HC14 Hex inverter Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT14 Hex inverter Schmitt trigger; TTL-enabled 4.5 to 5.5 -40 to +125 74HC1G14 Single inverter Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT1G14 Single inverter Schmitt trigger; TTL-enabled 4.5 to 5.5 -40 to +125 74HC2G14 Dual inverter Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT2G14 Dual inverter Schmitt trigger; TTL-enabled 4.5 to 5.5 -40 to +125 74HC2G17 Dual buffer Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT2G17 Dual buffer Schmitt trigger; TTL-enabled 4.5 to 5.5 -40 to +125 74HC3G14 Triple inverter Schmitt trigger 2.0 to 6.0 -40 to +125 74HCT3G14 Triple inverter Schmitt trigger; TTL-enabled 4.5 to 5.5 -40 to +125 HEF40106 Hex inverter Schmitt trigger 4.5 to 15.5 -40 to +85 HEF4093 Quad 2-input NAND gate Schmitt trigger 4.5 to 15.5 -40 to +125 FOC firmware for BLDC and PMSM motors available on LPCWare.com LPCMotoCal GUI-based calibration tool Cables, QuickStart Guide More information: www.lpcware.com/motor_control Video demonstration: http://www.youtube.com/playlist?list=PLylbUYisuZ4yyieW5wwmSDY3pQir1KEn6 18 Motor-control brochure Motor-control brochure 19 Logic solutions Magnetic Position Sensor Schmitt trigger for speed control NXP KMZ60: Position Feedback Sensor Cost-effective and simple solution for speed To FET Gate To FET Gate control Schmitt trigger minimizes false gate triggers Cover wide temperature range of -40 to +125C PMSM Application in Automotive and Non-Automotive world Position feedback is essential for motor commutation to achieve best efficiency Available in wide range of leaded and small- 2x BAS316 footprint leadless packages 2x BAS316 1x74HC132 or 1x74HC132 1x HEF4093 or 1x HEF4093 KMZ60 is the ideal replacement for optical encoder/resolver for accurate position feedback Pure analog sensor with sin/cos output, suitable for motor application Vbat FWD Vbat FWD REV Logic Microcontroller Discretes Logic Microcontroller Discretes Battery-operated power tools Optimized low-power solutions Easy on/off and speed control PWM/ Speed Gen PWM/ Circuit Speed Gen Circuit N-CH FET N-CH FET REV KMZ60 BLDC Commutation Demonstrator The demo board demonstrates the difference between block commutation and field oriented commutation Easy setup, USB for power supply/data communication Comparison between two different commutation methods Video demonstration: https://www.youtube.com/watch?v=yWnthWH0JBY 20 Motor-control brochure Motor-control brochure 21 Bipolar transistors Schottky diodes Bipolar transistors in LFPAK56 and LFPAK56D power packages NXP’s FlatPower packages CFP3, CFP5, and CFP15 `` High thermal power dissipation up to 3 W Small SMD FlatPower packages in three different versions Robust design inside the FlatPower packages `` Vceo up to 100 V Solid clip `` All types in LFPAK56D and 18 types in LFPAK56 AECQ 101 Silicon die qualified (IC = 3 up to 15 A) Tin-plated lead end `` 2 types in LFPAK56D with current gain matching of 5 and 10% Solid clip `` Reduced PCB area requirements compared to transistors in Silicon die DPAK `` Designed for reliability, solid copper clip, wire-free `` High energy efficiency due to less heat generation `` Ultra-thin packages of only 1 mm height LFPAK56 (SOT669) Single package 5 x 6 x 1.1 Applications ``Power management ``Motor drive ``Loadswitch ``LED lighting ``Linear-mode ``Relay replacement voltage regulator Large `` Flat geometry, of down to 0.78 mm height heat sink `` Clip-bond technology and heatsink `` Halogen-free mold compound `` Tin-plated lead ends enables AOI `` AEC-Q101 qualified `` Benchmark flat design of only 0.7 mm height ``IGBTdrive ``Backlight units Power dissipation (@ 1 cm2), and IFSM per package Motor drive (2x PHPT60603NY/PY) or a double LFPAK56D (PHPT610030NK/PK) P tot [mW] Same power dissipation but half the size Tin-plated lead end LFPAK56D (SOT1205) Dual package 5 x 6 x 1.1 Package height comparison: CFP15 - DPAK 2000 250 1100 200 1000 150 80 900 60 800 40 Product Pad Layout Footprint Area IFSM [A] `` Suitable for high-temperature applications up to 175 °C Large heat sink CPF15 (SOT1289) DPAK (SOT428) Reduction: 66% 700 20 0 600 Package name SOD123F wire bond Body size (w x l x h) 2.6 x 1.6 x 1.1 CFP3 (SOD123W) CFP5 (SOD128) small clip large clip 2.6 x 1.7 x 1.0 3.8 x 2.5 x 1.0 CFP15 (SOT1289) dual clip 5.8 x 4.3 x 0.78 0.78 mm 2.3 mm The new NXP CFP15 package delivers a 66% reduction in height compared to a conventional DPAK. Schottky diodes Enabling superior high P tot and IFSM `` Huge portfolio of Schottky diodes available `` 20 to 100 V, 1 to 15 A, very low VF 55 % package size reduction while retaining the same power performance 22 Motor-control brochure `` Junction temperature up to 175 °C Motor-control brochure 23 Power solutions NXP Motor-Control related Videos Some Applications NextPowerS3 MOSFETs NXP Standard Products for Power Tools NextPowerS3 Superfast Switching with Thermal Efficiency Low Spiking Typical Competitor NXP Standard Products for e-bikes NextPowerS3 Soft recovery Simplifying BLDC and FOC motor-control with NXP’s LPC1500 microcontrollers Thanks to its optimised output capacitance, body diode, and channel structure, the NextPowerS3 MOSFET exhibits “soft-recovery” switching behaviour, resulting in lower voltage spikes, faster decays, and virtually no gate glitches. Product Highlights Packaged in the copper-clip based LFPAK package, the NextPowerS3 features best-in-class thermal performance. NextPower Cordless, mosfets for battery powered tools Triacs Package name ID [max] (A) QG(tot) [typ] (nC) 3.2 70 16 4.3 5.7 70 9.2 30 0.87 1.09 300 51 PSMN1R0-30YLD 30 1.02 1.3 300 38 PSMN1R0-40YLD 40 1.1 1.4 300 (TBD) 54 PSMN1R4-40YLD 40 1.4 1.85 250 (TBD) 45 VDS RDSon[max] RDSon[max] [max] [V] @ 10 V (mΩ) @ VGS 4.5 V (mΩ) PSMN2R4-30MLD 30 2.4 PSMN4R2-30MLD 30 PSMN0R9-30YLD Type number LPC1500 motor-control Solution Overview Packaging Insights LFPAK Power-SO8 vs. DPAK LFPAK Clip-Bonding 24 Motor-control brochure Motor-control brochure 25 Notes Notes © 2016 NXP Semiconductors N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: January 2016 Document order number: 9397 750 17632 Printed in the Netherlands