SP10T Antenna Switch Module 6TRx/2Tx/2Rx CXM3582UR Description The CXM3582UR is a SP10T antenna switch module for GSM/UMTS/CDMA/LTE multi-mode handset. The CXM3582UR has a built-in dual low pass filter and a +1.8 V CMOS compatible decoder. The Sony GaAs junction gate pHEMT (JPHEMT) MMIC process is used for low insertion loss and high linearity. The device has low BOM with no DC blocking capacitor. (Applications: GSM/UMTS/CDMA/LTE multi-mode handsets) Features ◆ Low insertion loss: 0.45 dB (Typ.) TRx (Cellular band) 0.60 dB (Typ.) TRx (IMT Tx band) ◆ High linearity: IIP3 = 68 dBm ◆ Battery direct operation: VDD = 2.5 V to 5.0 V ◆ No DC blocking capacitors except sourcing DC bias ◆ Small package size: 26-pin UQFN (2.6 mm x 3.4 mm x 0.625 mm Max.) ◆ Lead-free and RoHS compliant Structure GaAs junction gate pHEMT (JPHEMT) MMIC switch, CMOS decoder Absolute Maximum Ratings ◆ Bias voltage VDD 6 V (Ta = 25 °C) ◆ Control voltage VCTL 4 V (Ta = 25 °C) ◆ Input power max. [Tx1] 36 dBm (Duty cycle = 12.5 % to 50 %) (Ta = 25 °C) ◆ Input power max. [Tx2] 34 dBm (Duty cycle = 12.5 % to 50 %) (Ta = 25 °C) ◆ Input power max. [TRx] 32 dBm (Ta = 25 °C) ◆ Input power max. [Rx] 13 dBm (Ta = 25 °C) ◆ Operating temperature –35 to +90 °C ◆ Storage temperature –65 to +150 °C GaAs MMIC’s are ESD sensitive devices. Special handling precautions are required. 1 CXM3582UR Block Diagram of SP10T Antenna Switch Module TRx1 TRx2 TRx3 TRx4 ANT TRx5 LPF1 TRx6 Tx1 Tx2 Decoder Logic LPF2 Rx1 Rx2 2 CXM3582UR Block Diagram of SP10T 6TRx/2Tx/2Rx ANT F1 F2 F11 F3 F12 F4 F13 F5 F14 F6 F15 F7 F16 F8 F17 F9 F18 F10 F19 F20 LPF2 LPF1 TRx1 TRx3 TRx2 TRx4 TRx5 Rx1 TRx6 Tx1 Tx2 F13 F14 F15 F16 Rx2 Truth Table State Active path CTL state SW state (*1) CTLA CTLB CTLC CTLD F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F17 F18 F19 F20 1 TRx1 L L H L H L L L L L L L L L L H H H H H H H H H 2 TRx2 H L H L L H L L L L L L L L H L H H H H H H H H 3 TRx3 H H H L L L H L L L L L L L H H L H H H H H H H 4 TRx4 H L H H L L L H L L L L L L H H H L H H H H H H 5 TRx5 H H H H L L L L H L L L L L H H H H L H H H H H 6 TRx6 H L L H L L L L L H L L L L H H H H H L H H H H 7 Rx1 L H H L L L L L L L H L L L H H H H H H L H H H 8 Rx2 L H L L L L L L L L L H L L H H H H H H H L H H 9 Tx1 H H L L L L L L L L L L H L H H H H H H H H L H 10 Tx2 H L L L L L L L L L L L L H H H H H H H H H H L 11 Idle (*2) L L L L — — — — — — — — — — — — — — — — — — — — (*1) State “L” means a switch “OFF”, State “H” means a switch “ON” (*2) State “Idle” means that the DC/DC converter is “OFF”, and the switch paths are in an undefined state. 3 CXM3582UR Tx1 GND GND Tx2 GND Pin Configuration of SP10T 13 12 11 10 9 GND 14 8 GND Rx2 15 7 ANT GND 16 6 GND Rx1 17 5 GND TRx1 18 4 TRx6 TRx2 19 3 TRx5 TRx3 20 2 TRx4 GND 21 1 GND UQFN-26P PKG (2.6 mm × 3.4 mm × 0.625 mm Max.) 22 23 24 25 26 VDD CTLD CTLC CTLB CTLA Top View DC Bias Condition (Ta = 25 °C) Parameter Min. Typ. Max. Unit VDD +2.5 +2.8 +5.0 V VCTL(H) +1.35 +1.8 +3.1 V VCTL(L) 0 — +0.45 V 4 CXM3582UR Target Specification (VDD = 2.5 V, Ta = 25 °C) Item Symbol Path All ports in active paths Condition *1, *2, *3, *10 *4, *11 *5 *1, *2, *3, *10 *4, *11 *5 *1, *2, *3, *10 *4, *11 *5 *1, *2, *3, *10 *4, *11 *5 *1, *2, *3, *10 *4, *11 *5 *6 *7 *1, *2, *3, *10 *4, *11 *5 *8 *9 *10 *11 600 to 2170 MHz Ant - TRx1, 2, 3, 4, 5, 6 *2, *3, *4 Ant - TRx4 *2, *12B Ant - Tx1 *8 Ant - Tx2 *9 Ant - TRx1 Ant - TRx2 Ant - TRx3 Ant - TRx4 Insertion loss IL Ant - TRx5 Ant - TRx6 Ant - Tx1 Ant - Tx2 Ant - Rx1, 2 VSWR Harmonics VSWR 2fo 3fo 2fo 2fo 3fo 2fo 3fo Tx1 - Ant Attenuation ATT Tx2 - Ant Inter modulation product power in Rx band IMD2 Input IP3 Switching time IIP3 Ts Wake up time Tw Control current Supply current Supply current Ictl IDD IDD Min. — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 25 30 25 20 15 25 25 20 Typ. 0.48 0.65 0.69 0.46 0.63 0.70 0.40 0.54 0.58 0.39 0.49 0.51 0.44 0.60 0.66 0.75 0.96 0.45 0.69 0.75 1.10 1.20 0.80 0.99 — — — — — — — — — — — — — — — — Max. 0.58 0.80 0.84 0.56 0.78 0.85 0.50 0.69 0.73 0.49 0.64 0.66 0.54 0.75 0.81 0.95 1.16 0.55 0.84 0.90 1.20 1.35 0.90 1.14 1.50 –40 –40 –78 –36 –36 –36 –36 — — — — — — — — *12A, 13, 14, 17, 18, 21, 22 — — –105 *12A, 15, 16, 19, 20, 23, 24 — — –105 dBm *12A, 25, 26 50 % Ctl to 90 % RF Wake up time from Idle mode to Active mode VCTL = 1.80 V VDD = 2.8 V VDD = 2.8 V — — 68 3 — 5 µs — 30 50 µs — — — 1 0.22 — 5 0.4 20 µA mA µA 1648 to 1805 MHz 1805 to 1830 MHz 2472 to 2745 MHz 3296 to 10000 MHz 10000 to 12750 MHz 3420 to 3820 MHz 5130 to 5730 MHz 6840 to 12750 MHz Ant - TRx1, 2, 3, 4, 5 ,6 IMD3 Ant - TRx1, 2, 3, 4, 5, 6 Active mode Active mode Idle mode 5 Unit dB — dBm dB CXM3582UR Item Symbol Path Tx1 - TRx1, 2, 3, 4, 5, 6, Rx1, 2 Tx2 - TRx1, 2, 3, 4, 5, 6 Tx2 - Rx1, 2 TRx1, 2, 3 - TRx4, 5, 6 TRx1, 2, 3 - TRx4, 5, 6 TRx5 - TRx1, 2, 3 TRx1 - TRx2 TRx1 - TRx2 TRx1 - TRx3 TRx1 - TRx3 TRx2 - TRx3 Isolation ISO TRx2 - TRx3 TRx4 - TRx5 TRx4 - TRx5 TRx4 - TRx5 TRx4 - TRx6 TRx4 - TRx6 TRx5 - TRx6 TRx5 - TRx6 TRx5 - TRx6 Rx1 - Rx2 Condition *8 (Tx1 Active) *9 (Tx2 Active) *1, *2, *3, *10 (TRx1, 2, 3, 4, 5, 6 Active) *4, *5, *11 (TRx1, 2, 3, 4, 5, 6 Active) *6, *7 (TRx5 Active) *1, *2, *3, *10 (TRx1, 2 Active) *4, *5, *11 (TRx1, 2 Active) *1, *2, *3, *10 (TRx1, 3 Active) *4, *5, *11 (TRx1, 3 Active) *1, *2, *3, *10 (TRx2, 3 Active) *4, *5, *11 (TRx2, 3 Active) *1, *2, *3, *10 (TRx4, 5 Active) *4, *5, *11 (TRx4, 5 Active) *6, *7 (TRx5 Active) *1, *2, *3, *10 (TRx4, 6 Active) *4, *5, *11 (TRx4, 6 Active) *1, *2, *3, *10 (TRx5, 6 Active) *4, *5, *11 (TRx5, 6 Active) *6, *7 (TRx5 Active) *11 (Rx1, 2 Active) Electrical Characteristics are measured with all RF ports terminated in 50 Ω. Corresponding Band of TRx (UMTS/CDMA/GSM) *1 Pin = 26 dBm, 452 to 468 MHz (Band Class 5) *2 Pin = 25 dBm, 704 to 787 MHz (Band 13, Band 17) *3 Pin = 26 dBm, 824 to 960 MHz (Band 5, Band 8) *4 Pin = 26 dBm, 1710 to 1990 MHz (Band 1 Tx, Band 2 Tx, Band 3 Tx, Band 4 Tx) *5 Pin = 10 dBm, 2110 to 2170 MHz (Band 1 Rx, Band 4 Rx) *6 Pin = 26 dBm, 2300 to 2400 MHz (Band 40) *7 Pin = 26 dBm, 2500 to 2690 MHz (Band 7) *8 Pin = 35 dBm, 824 to 915 MHz (GSM850/900 Tx) *9 Pin = 32 dBm, 1710 to 1910 MHz (GSM1800/1900 Tx) *10 Pin = 10 dBm, 869 to 960 MHz (GSM850/900 Rx) *11 Pin = 10 dBm, 1805 to 1990 MHz (GSM1800/1900 Rx) *12A Measured with the recommended circuit 1, 2 *12B Measured with the recommended circuit 3 6 Min. Typ. Max. 40 — — 32 40 — — — — 40 — — 30 — — 25 — — 30 — — 18 — — 40 — — 20 — — 25 — — 15 — — 30 — — 21 — — 15 — — 40 — — 26 — — 30 — — 24 — — 17 — — 33 — — Unit dB CXM3582UR IMD Condition Band Band I Band II Band V fRx on TRx 2140 MHz 1960 MHz 880 MHz fTx +20 dBm on TRx 1950 MHz 1880 MHz 835 MHz fBlocker –15 dBm on Ant IMD2 (fRx – fTx) 190 MHz *13 IMD2 (fRx + fTx) 4090 MHz *14 IMD3 (2fTx – fRx) 1760 MHz *15 IMD3 (2fTx + fRx) 6040 MHz *16 IMD2 (fRx – fTx) 80 MHz *17 IMD2 (fRx + fTx) 3840 MHz *18 IMD3 (2fTx – fRx) 1800 MHz *19 IMD3 (2fTx + fRx) 5720 MHz *20 IMD2 (fRx – fTx) 45 MHz *21 IMD2 (fRx + fTx) 1715 MHz *22 IMD3 (2fTx – fRx) 790 MHz *23 IMD3 (2fTx + fRx) 2550 MHz *24 IIP3 Condition Band Band I Band V f1 +27 dBm on TRx 1950 MHz 835 MHz f2 +27 dBm on TRx 1951MHz 836MHz IMD condition IIP3 condition IIP3 = (3 * Pout – IM3)/2 *25 *26 Electrical Characteristics are measured with all RF ports terminated in 50 Ω. Measured with the recommended circuit. 7 CXM3582UR Target Specification of Triple Beat Ratio (VDD = 2.5V, Ta = 25 °C) Condition Item Symbol Triple beat ratio TBR Path Ant - TRx1, 2, 3, 4, 5, 6 Tx1 at TRx* 21.5dBm 835.5 MHz Tx2 at TRx* 21.5dBm 836.5 MHz Jammer Triple beat Min. at Ant product –30 dBm at TRx* 881.5 MHz 881.5 ± 1 MHz 81 1880 MHz 1881 MHz 1960 MHz 1960 ± 1 MHz 81 Typ. Max. — — — — Electrical Characteristics are measured with all RF ports terminated in 50 Ω. Measured with the recommended circuit Target Specification of Input IP2 (VDD = 2.5 V, Ta = 25 °C) Item Symbol Input IP2 IIP2 Path Ant - TRx1, 2, 3, 4, 5, 6 Tx at TRx* 24 dBm 836.61 836.61 1885 1885 1732.5 1732.5 Condition Jammer at Ant –20 dBm 1718.61 45 3850 80 3865 400 IM2 product at TRx* Min. Typ. Max. Unit 881.61 881.61 1965 1965 2132.5 2132.5 113.5 95.5 95.5 95.5 95.5 95.5 — — — — — — — — — — — — dBm Electrical Characteristics are measured with all RF ports terminated in 50 Ω. Measured with the recommended circuit 8 Unit dBc CXM3582UR Recommended Circuit 1 13 TRx1 TRx2 TRx3 GND GND GND Tx2 9 14 8 15 7 16 6 17 UQFN-26P PKG (2.6 mm × 3.4 mm × 0.625 mm Max.) 18 5 4 Top View 19 3 20 2 21 1 23 VDD 22 C2 24 25 GND GND GND TRx6 TRx5 TRx4 GND 26 *1: No DC blocking capacitors are required on all RF ports. (Except sourcing DC bias) *2: DC levels of all RF ports are GND. *3: L1 (22 nH) and C1 (22 pF) are recommended on Ant port for ESD protection. *4: C2 capacitor (100 pF) is recommended. *5: TRx5 is recommended for Band7. 9 C1 ANT CTLA Rx1 10 CTLB GND 11 CTLC Rx2 12 CTLD GND GND Tx1 Operation frequency range: 0.7-2.7 GHz L1 CXM3582UR Recommended Circuit 2 13 GND Rx2 GND Rx1 TRx1 TRx2 TRx3 L2 GND 12 11 10 GND Tx2 GND GND Tx1 Operation frequency range: 0.45-2.7 GHz 9 14 8 15 7 16 6 17 UQFN-26P PKG (2.6 mm × 3.4 mm × 0.625 mm Max.) 18 5 4 Top View 19 3 20 2 21 1 GND C1 ANT GND L1 GND TRx6 TRx5 TRx4 GND L2 L2 L2 26 CTLA 25 CTLB C2 24 CTLC VDD L2 23 CTLD 22 L2 *1: No DC blocking capacitors are required on all RF ports. (Except sourcing DC bias) *2: DC levels of all RF ports are GND. *3: L1 (47 nH) and C1 (22 pF) are recommended on Ant port for ESD protection. *4: C2 Capacitor (100 pF) is recommended. *5: TRx5 is recommended for Band7. *6: L2 (12 nH) is recommended on a TRx port assigned for Band I to improve IMD2 performance. (Rx-Tx (190 MHz)) 10 CXM3582UR Recommended Circuit 3 13 TRx1 TRx2 TRx3 GND GND GND Tx2 9 14 8 15 7 16 6 17 UQFN-26P PKG (2.6 mm × 3.4 mm × 0.625 mm Max.) 18 5 4 Top View 19 3 20 2 21 1 23 VDD 22 C2 24 25 GND GND L1 GND TRx6 TRx5 C3 TRx4 GND 26 *1: No DC blocking capacitors are required on all RF ports. (Except sourcing DC bias) *2: DC levels of all RF ports are GND. *3: L1 (47 nH) and C1(22 pF) are recommended on Ant port for ESD protection. *4: C2 Capacitor (100 pF) is recommended. *5: TRx5 is recommended for Band7. *6: L2 (1.8 nH) and C3 (4.0 pF) are recommended when TRx4 is assigned for Band 13. 11 C1 ANT CTLA Rx1 10 CTLB GND 11 CTLC Rx2 12 CTLD GND GND Tx1 2nd Harmonics Improvement at LTE (Band13) L2 CXM3582UR Recommended Land Pattern UQFN-26P-01 Macro drawing (Reference) PKG: 3.4 mm x 2.6 mm * Metal mask thickness: 110 µm : Land Pin pitch: 0.4 mm : Mask (Open area) : Metal area in board (*1) : Resist (Open area) *1: GND plane is recommended. 3.6 3.4 (PKG Line) 0.2 0.25 0.1 2.8 2.6 (PKG Line) 1.7 (*) 1.5 1.2 R0.05 (Mask) 0.2 0.3 0.1 0.15 0.4 A PCB Design for UQFN-26P 12 PKG Line Detail A 2.5 (*) 0.8 0.6 0.16 0.21 CXM3582UR Package Outline (Unit: mm) Product Code：875342105 13 CXM3582UR Package Outline (Unit: mm) Product Code：875340939 14 CXM3582UR Marking Product Code: 875342105 15 CXM3582UR Marking Product Code: 875340939 16 CXM3582UR Moisture Sensitivity Moisture Sensitivity Level for this part is MSL = 2 17 CXM3582UR Note Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. 18