QIQ0660001 Powerex Inc., 200 Hillis St., Youngwood, PA 15697 (724) 925-7272 IGBT H-Series Chopper Hermetic Module 600 Amperes/600 Volts Description: Powerex IGBT Hermetic modules are designed for use in switching applications. Each Module consists of two IGBT transistors in a half bridge configuration with each transistor having a reverse connected super fast recovery free wheel diode. All components are located in a hermetically sealed chamber and are electrically isolated from the heat sinking base plate, offering simplified system assembly and thermal management. Features: ♦ Low Drive Power ♦ Low VCE(sat) ♦ Discrete Super-Fast Recovery (70ns) Free-Wheel Diode ♦ Isolated Base plate for Easy Heat sinking ♦ Fully Hermetic Package ♦ Package Design Capable of Use at High Altitudes ♦ Package can be modified to adhere to customer dimensions. ♦ D1 sized to match RM400HA Schematic: D1 D2 Applications: ♦ AC Motor Control ♦ Motion/Servo Control ♦ Air Craft Applications Ordering Information: Contact Powerex Custom Modules Page 1 PRELIMINARY 06/06/97 QIQ0660001 Powerex Inc., 200 Hillis St., Youngwood, PA 15697 (724) 925-7272 IGBT H-Series Chopper Hermetic Module 600 Amperes/600 Volts Maximum Ratings, Tj=25°°C unless otherwise specified Ratings Collector Emitter Voltage Gate Emitter Voltage Collector Current Peak Collector Current Diode Forward Current (D2) Diode Forward Current (D1) V Isolation Symbol VCES VGES IC ICM IFM IFM VRMS Units Volts Volts Amperes Amperes Amperes Amperes Volts 600 ±20 600 1200* 600 400 2500 Static Electrical Characteristics, Tj=25°°C unless otherwise specified Characteristic Collector Cutoff Current Gate Leakage Current Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage Symbol ICES IGES VGE(th) VCE(sat) VCE(sat) Total Gate Charge QG Diode Forward Voltage (D1) VFM Diode Forward Voltage (D2) VFM Test Conditions VCE=VCES VCE=0V IC=60mA, VCE=10V IC=600A, VGE=15V IC=600A, VGE=15V, Tj=150°C VCC=300V, IC=600A, VGS=15V IE=400A, VGS=0V IE=600A, VGS=0V Min 4.5 Typ Max Units 6.0 1.0 0.5 7.5 mA µA Volts 2.1 2.8 Volts 2.15 Volts 1800 nC 2.0 Volts 2.8 Volts Dynamic Electrical Characteristics, Tj=25°°C unless otherwise specified Characteristic Symbol Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn on Delay time Rise Time Turn off delay time Cies Coes Cres td(on) tr td(off) Fall Time Diode Reverse Recovery Time (D1) Diode Reverse Recovery Time (D2) Diode reverse Recovery Charge (D1) tf trr trr Qrr Diode reverse Recovery Charge (D2) Qrr Page 2 Test Conditions VGE=0V VCE=10V f=1MHz VCC=300V IC=600A VGE1=VGE2=15 V RG=1Ω IE=400A IE=600A diE/dt= 400A/µS diE/dt= 1200A/µS PRELIMINARY Min Typ Max Units 60 21 12 nF nF nF nS nS nS 300 400 110 80 nS nS nS µC 1.62 µC 06/06/97 QIQ0660001 Powerex Inc., 200 Hillis St., Youngwood, PA 15697 (724) 925-7272 IGBT H-Series Chopper Hermetic Module 600 Amperes/600 Volts Thermal and Mechanical Characteristics, Tj=25°°C unless otherwise specified Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Page 3 Symbol RθJC Test Conditions IGBT RθJC Diode (D1) 0.08 °C/W RθJC Diode (D2) 0.12 °C/W PRELIMINARY Min Typ Max Units 0.06 °C/W 06/06/97