DATA SHEET MOS FIELD EFFECT TRANSISTOR μ PA2727UT1A SWITCHING N-CHANNEL POWER MOSFET PACKAGE DRAWING (Unit: mm) 1 RDS(on)1 = 9.6 mΩ MAX. (VGS = 10 V, ID = 8 A) 5 +0.1 6 ±0.2 QGD = 3.5 nC TYP. (VDD = 15 V, ID = 16 A) • Thin type surface mount package with heat spreader (8-pin HVSON) 0 +0.05 −0 • RoHS Compliant Drain to Source Voltage (VGS = 0 V) VDSS 30 V Gate to Source Voltage (VDS = 0 V) VGSS ±20 V Drain Current (DC) ID(DC) ±16 A ID(pulse) ±96 A PT1 1.5 W PT2 4.6 W Drain Current (pulse) Note1 Total Power Dissipation Note2 Total Power Dissipation (PW = 10 sec) Note2 Channel Temperature Tch 150 °C Storage Temperature Tstg −55 to +150 °C Single Avalanche Current Note3 IAS 16 A Single Avalanche Energy Note3 EAS 26 mJ THERMAL RESISTANCE Channel to Ambient Thermal Resistance Note2 Channel to Case (Drain) Thermal Resistance Rth(ch-A) 83.3 °C/W Rth(ch-C) 2.0 °C/W Notes 1. PW ≤ 10 μs, Duty Cycle ≤ 1% 1 0.2 1, 2, 3 : Source 4 : Gate 5, 6, 7, 8: Drain 4.1 ±0.2 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, All terminals are connected.) 0.10 S 5.4 ±0.2 0.10 M • Low QGD 5 ±0.2 6 4 0.42 −0.05 RDS(on)2 = 15 mΩ MAX. (VGS = 4.5 V, ID = 8 A) 7 3 5.15 ±0.2 • Low on-state resistance 8 2 1.0 MAX. FEATURES 0.27 ±0.05 The μ PA2727UT1A is N-channel MOSFET designed for DC/DC converter applications. 1.27 DESCRIPTION 3.65 ±0.2 0.6 ±0.15 0.7 ±0.15 EQUIVALENT CIRCUIT Drain Body Diode Gate Source 2. Mounted on a glass epoxy board of 25.4 mm x 25.4 mm x 0.8 mm 3. Starting Tch = 25°C, VDD = 15 V, RG = 25 Ω, VGS = 20 → 0 V, L = 100 μH Remark Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. G18300EJ1V0DS00 (1st edition) Date Published May 2007 NS CP(K) Printed in Japan 2006, 2007 μ PA2727UT1A ELECTRICAL CHARACTERISTICS (TA = 25°C, All terminals are connected.) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT 10 μA ±100 nA 2.5 V Zero Gate Voltage Drain Current IDSS VDS = 30 V, VGS = 0 V Gate Leakage Current IGSS VGS = ±20 V, VDS = 0 V VGS(off) VDS = 10 V, ID = 1 mA | yfs | VDS = 10 V, ID = 8 A RDS(on)1 VGS = 10 V, ID = 8 A 7.6 9.6 mΩ RDS(on)2 VGS = 4.5 V, ID = 8 A 11 15 mΩ Input Capacitance Ciss VDS = 15 V, 1170 pF Output Capacitance Coss VGS = 0 V, 250 pF Reverse Transfer Capacitance Crss f = 1 MHz 90 pF Turn-on Delay Time td(on) VDD = 15 V, ID = 8 A, 13 ns Rise Time tr VGS = 10 V, 3.6 ns Turn-off Delay Time td(off) RG = 10 Ω 41 ns Fall Time tf 8 ns Total Gate Charge QG VDD = 15 V, 11 nC Gate to Source Charge QGS VGS = 5 V, 3.8 nC QGD ID = 16 A 3.5 nC Gate to Source Cut-off Voltage Forward Transfer Admittance Note Drain to Source On-state Resistance Note Gate to Drain Charge Body Diode Forward Voltage Note 1.5 6 S VF(S-D) IF = 16 A, VGS = 0 V 0.83 V Reverse Recovery Time trr IF = 16 A, VGS = 0 V, 27 ns Reverse Recovery Charge Qrr di/dt = 100 A/μs 23 nC Gate Resistance RG f = 1 MHz 2.2 Ω Note Pulsed TEST CIRCUIT 1 AVALANCHE CAPABILITY D.U.T. RG = 25 Ω D.U.T. L 50 Ω PG. VGS = 20 → 0 V TEST CIRCUIT 2 SWITCHING TIME RL RG PG. VDD VGS VGS Wave Form 0 VGS 10% 90% VDD VDS 90% BVDSS IAS VDS ID VDS τ τ = 1 μs Duty Cycle ≤ 1% TEST CIRCUIT 3 GATE CHARGE D.U.T. IG = 2 mA PG. 2 50 Ω 0 10% 10% tr td(off) Wave Form VDD Starting Tch 90% VDS VGS 0 RL VDD Data Sheet G18300EJ1V0DS td(on) ton tf toff μ PA2727UT1A TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA FORWARD BIAS SAFE OPERATING AREA 1000 100 ID(DC) 10 30 0 μs s i 0 m s i d it e m Li V ) ) on 1i 0 S( = D R GS (V 1 Po w er D is si 1i 0 pa t io s n L im Single Pulse it e d Mounted on a glass epoxy board of 25.4 mm x 25.4 mm x 0.8 mm 20 0 1i 0 m = s 40 1i 0 i 60 PW m ID - Drain Current - A 80 ID(pulse) 100 1i dT - Percentage of Rated Power - % 120 0 20 40 60 80 100 0.1 0.01 120 140 160 0.1 1 10 100 VDS - Drain to Source Voltage - V TA - Ambient Temperature - °C TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH rth(t) - Transient Thermal Resistance - °C/W 1000 Rth(ch-A) = 83.3°C/Wi 100 10 1 Rth(ch-C) = 2.0°C/Wi 0.1 Single Pulse Rth(ch-A): Mounted on a glass epoxy board of 25.4 mm x 25.4 mm x 0.8 mm 0.01 100 μ 1m 10 m 100 m 1 10 100 1000 PW - Pulse Width - s DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE FORWARD TRANSFER CHARACTERISTICS 35 35 10 V 4.5 V 4.0 V 25 30 3.6 V 20 ID - Drain Current - A 30 ID - Drain Current - A 3.8 V 3.4 V 15 3.2 V 10 25 15 10 VGS = 3.0 V 5 TA = −55°C 25°C 75°C 125°C 20 VDS = 10 V Pulsed 5 Pulsed 0 0 0 0.2 0.4 0.6 0.8 1 VDS - Drain to Source Voltage - V 0 1 2 3 4 5 VGS - Gate to Source Voltage - V Data Sheet G18300EJ1V0DS 3 μ PA2727UT1A | yfs | - Forward Transfer Admittance - S 3 2.5 2 1.5 1 0.5 VDS = 10 V ID =1 mA 0 -75 -25 25 75 125 FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 100 TA = −55°C 25°C 75°C 125°C 10 1 VDS = 10 V Pulsed 0.1 175 0.1 100 DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 30 20 VGS = 4.5 V 10 10 V Pulsed 0 0.1 1 10 100 30 ID = 8 A Pulsed 20 10 0 0 5 10 15 20 VGS - Gate to Source Voltage - V DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 25 10000 ID = 8 A Pulsed 20 Ciss, Coss, Crss - Capacitance - pF RDS(on) - Drain to Source On-state Resistance - mΩ 10 ID - Drain Current - A ID - Drain Current - A VGS = 4.5 V 15 10 10 V 5 0 Ciss 1000 Coss 100 Crss VGS = 0 V f = 1 MHz 10 -75 -25 25 75 125 175 Tch - Channel Temperature - °C 4 1 Tch - Channel Temperature - °C RDS(on) - Drain to Source On-state Resistance - mΩ RDS(on) - Drain to Source On-state Resistance - mΩ VGS(off) - Gate to Source Cut-off Voltage - V GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE 0.1 1 10 VDS - Drain to Source Voltage - V Data Sheet G18300EJ1V0DS 100 μ PA2727UT1A DYNAMIC INPUT/OUTPUT CHARACTERISTICS SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100 10 V VDD = 24 V 15 V 6V 4 IF - Diode Forward Current - A VGS - Gate to Source Voltage - V 6 2 VGS = 4.5 V 10 0V 1 ID = 16 A Pulsed 0.1 0 0 5 10 0 15 0.2 0.4 0.6 0.8 1 1.2 VF(S-D) - Source to Drain Voltage - V QG - Gate Charge - nC ORDERING INFORMATION PART NUMBER LEAD PLATING μ PA2727UT1A-E1-AZ Note μ PA2727UT1A-E2-AZ Note μ PA2727UT1A-E1-AY Note μ PA2727UT1A-E2-AY Note PACKING PACKAGE Sn-Bi Tape 3000 p/reel 8-pin HVSON 0.10 g TYP. Pure Sn Note Pb-free (This product does not contain Pb in the external electrode.) Data Sheet G18300EJ1V0DS 5 μ PA2727UT1A • The information in this document is current as of May, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1