DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D109 PXT2907A PNP switching transistor Product specification Supersedes data of 1999 Apr 14 2002 Mar 20 Philips Semiconductors Product specification PNP switching transistor PXT2907A FEATURES PINNING • High current (max. 600 mA) PIN • Low voltage (max. 60 V). APPLICATIONS DESCRIPTION 1 emitter 2 collector 3 base • Switching and linear amplification. DESCRIPTION handbook, halfpage 2 PNP switching transistor in a SOT89 plastic package. NPN complement: PXT2222A. 3 1 MARKING TYPE NUMBER 1 MARKING CODE PXT2907A 2 3 Bottom view p2F MAM297 Fig.1 Simplified outline (SOT89) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter − −60 VCEO collector-emitter voltage open base − −60 V VEBO emitter-base voltage open collector − −5 V IC collector current (DC) − −600 mA ICM peak collector current − −800 mA IBM peak base current − −200 mA Ptot total power dissipation − 1.3 W Tamb ≤ 25 °C; note 1 V Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb operating ambient temperature −65 +150 °C Note 1. Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 6 cm2. For other mounting conditions, see “Thermal considerations for SOT89 in the General Part of associated Handbook”. 2002 Mar 20 2 Philips Semiconductors Product specification PNP switching transistor PXT2907A THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS Rth j-a thermal resistance from junction to ambient Rth j-s thermal resistance from junction to soldering point VALUE UNIT 97 K/W 17 K/W note 1 Note 1. Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 6 cm2. For other mounting conditions, see “Thermal considerations for SOT89 in the General Part of associated Handbook”. CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL ICBO PARAMETER collector cut-off current CONDITIONS MIN. MAX. UNIT IE = 0; VCB = −50 V − −10 nA IE = 0; VCB = −50 V; Tamb = 125 °C − −10 µA nA IEBO emitter cut-off current IC = 0; VEB = −5 V − −50 hFE DC current gain IC = −0.1 mA; VCE = −1 V 75 − IC = −1 mA; VCE = −1 V 100 − IC = −10 mA; VCE = −1 V 100 − IC = −150 mA; VCE = −2 V 100 300 IC = −500 mA; VCE = −10 V 50 − collector-emitter saturation voltage IC = −150 mA; IB = −15 mA − −400 mV IC = −500 mA; IB = −50 mA − −1.6 V VBEsat base-emitter saturation voltage IC = −150 mA; IB = −15 mA − −1.3 V IC = −500 mA; IB = −50 mA − −2.6 V Cc collector capacitance IE = ie = 0; VCB = −10 V; f = 1 MHz − 8 pF Ce emitter capacitance IC = ic = 0; VEB = −500 mV; f = 1 MHz − 35 pF fT transition frequency IC = −20 mA; VCE = −10 V; f = 100 MHz 200 − MHz − 40 ns VCEsat Switching times (between 10% and 90% levels); (see Fig.2) ton turn-on time ICon = −150 mA; IBon = −15 mA; IBoff = 15 mA td delay time − 12 ns tr rise time − 30 ns toff turn-off time − 365 ns ts storage time − 300 ns tf fall time − 65 ns 2002 Mar 20 3 Philips Semiconductors Product specification PNP switching transistor PXT2907A VBB handbook, full pagewidth RB VCC RC Vo (probe) oscilloscope 450 Ω (probe) 450 Ω R2 Vi DUT R1 MGD624 Vi = −9.5 V; T = 500 µs; tp = 10 µs; tr = tf ≤ 3 ns. R1 = 68 Ω; R2 = 325 Ω; RB = 325 Ω; RC = 160 Ω. VBB = 3.5 V; VCC = −29.5 V. Oscilloscope input impedance Zi = 50 Ω. Fig.2 Test circuit for switching times. 2002 Mar 20 4 oscilloscope Philips Semiconductors Product specification PNP switching transistor PXT2907A PACKAGE OUTLINE Plastic surface mounted package; collector pad for good heat transfer; 3 leads SOT89 B D A b3 E HE L 1 2 3 c b2 w M b1 e1 e 0 2 4 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b1 b2 b3 c D E e e1 HE L min. w mm 1.6 1.4 0.48 0.35 0.53 0.40 1.8 1.4 0.44 0.37 4.6 4.4 2.6 2.4 3.0 1.5 4.25 3.75 0.8 0.13 OUTLINE VERSION SOT89 2002 Mar 20 REFERENCES IEC JEDEC EIAJ TO-243 SC-62 5 EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 Philips Semiconductors Product specification PNP switching transistor PXT2907A DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Mar 20 6 Philips Semiconductors Product specification PNP switching transistor PXT2907A NOTES 2002 Mar 20 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA74 © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/04/pp8 Date of release: 2002 Mar 20 Document order number: 9397 750 09423