NEC 2SB1431

'$7$6+((7
6,/,&2132:(575$16,6725
6%
3136,/,&21(3,7$;,$/75$16,6725'$5/,1*721&211(&7,21
)25/2:)5(48(1&<32:(5$03/,),(56$1'/2:63(('6:,7&+,1*
The 2SB1431 is a Darlington power transistor that can directly
PACKAGE DRAWING (UNIT: mm)
drive from the IC output. This transistor is ideal for motor drivers
and solenoid drivers in such as OA and FA equipment.
In addition, a small resin-molded insulation type package
contributes to high-density mounting and reduction of mounting
cost.
FEATURES
• High hFE due to Darlington connection:
hFE ≥ 2,000 (VCE = −2 V, IC = −3 A)
• Mold package that does not require an insulating board or
insulation bushing
QUALITY GRADES
• Standard
(OHFWURGH&RQQHFWLRQ
Please refer to “Quality Grades on NEC Semiconductor Devices”
%DVH
(Document No. C11531E) published by NEC Corporation to know
&ROOHFWRU
the specification of quality grade on the devices and its
recommended applications.
(PLWWHU
(48,9$/(17&,5&8,7
ABSOLUTE MAXIMUM RATINGS (Ta = 25°°C)
Parameter
Symbol
Ratings
Unit
Collector to base voltage
VCBO
−100
V
Collector to emitter voltage
VCEO
−100
V
Emitter to base voltage
VEBO
−7.0
V
Collector current (DC)
IC(DC)
−8.0
A
IC(pulse)*
−12
A
IB(DC)
−0.8
A
Total power dissipation
PT (Tc = 25°C)
25
W
Total power dissipation
PT (Ta = 25°C)
2.0
W
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Collector current (pulse)
Base current (DC)
* PW ≤ 10 ms, duty cycle ≤ 50%
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
'RFXPHQW1R'(-9'6VWHGLWLRQ
'DWH3XEOLVKHG$SULO1&3.
3ULQWHGLQ-DSDQ
©
2002
1998
6%
(/(&75,&$/&+$5$&7(5,67,&67D °°&
3DUDPHWHU
6\PERO
&RQGLWLRQV
0,1
0$;
8QLW
−
µ$
&ROOHFWRUFXWRIIFXUUHQW
,&%2
9&% −9,( '&FXUUHQWJDLQ
K)(
9&( −9,& −$
'&FXUUHQWJDLQ
K)(
9&( −9,& −$
&ROOHFWRUVDWXUDWLRQYROWDJH
9&(VDW
,& −$,% −P$
−
−
9
%DVHVDWXUDWLRQYROWDJH
9%(VDW
,& −$,% −P$
−
−
9
*DLQEDQGZLGWKSURGXFW
I7
9&( −9,& −$
0+]
&ROOHFWRUFDSDFLWDQFH
&RE
9&% −9,( I 0+]
S)
7XUQRQWLPH
WRQ
µV
6WRUDJHWLPH
WVWJ
,& −$,% −,% −P$
5/ Ω9&&≅−9
µV
µV
)DOOWLPH
WI
5HIHUWRWKHWHVWFLUFXLW
* Pulse test PW ≤ 350 µs, duty cycle ≤ 2%
K)(&/$66,),&$7,21
0DUNLQJ
0
/
.
K)(
WR
WR
WR
6:,7&+,1*7,0(WRQWVWJWI7(67&,5&8,7
%DVHFXUUHQW
ZDYHIRUP
&ROOHFWRUFXUUHQW
ZDYHIRUP
7<3
Data Sheet D16128EJ1V0DS
6%
,&'HUDWLQJG7
7RWDO3RZHU'LVVLSDWLRQ37:
7<3,&$/&+$5$&7(5,67,&67D °°&
&DVH7HPSHUDWXUH7&°&
&DVH7HPSHUDWXUH7&°&
&ROOHFWRU&XUUHQW,&$
6LQJOHSXOVH
W°&:
7UDQVLHQW7KHUPDO5HVLVWDQFHU
r(t)
&ROOHFWRUWR(PLWWHU9ROWDJH9&(9
:LWKRXWKHDWVLQN
:LWKLQILQLWHKHDWVLQN
3XOVH:LGWK3:V
Data Sheet D16128EJ1V0DS
6%
DC Current Gain hFE
Collector Current IC (A)
Pulse test
Base Saturation Voltage VBE(sat) (V)
Collector Saturation Voltage VCE(sat) (V)
Collector to Emitter Voltage VCE (V)
Pulse test
Collector Current IC (A)
Data Sheet D16128EJ1V0DS
Collector Current IC (A)
6%
>0([email protected]
Data Sheet D16128EJ1V0DS
6%
• The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
• NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
• While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
• NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4