NL17SZ02 2−Input NOR Gate The NL17SZ02 is a single 2-input NOR Gate in two tiny footprint packages. The device performs much as LCX multi-gate products in speed and drive. • • • • • • • Tiny SOT- 353 and SOT-553 Packages 2.4 ns TPD at 5 V (typ) Source/Sink 24 mA at 3.0 V Over-Voltage Tolerant Inputs Pin For Pin with NC7SZ02P5X, TC7SZ02FU and TC7SZ02AFE Chip Complexity: FETs = 20 Designed for 1.65 V to 5.5 V VCC Operation http://onsemi.com MARKING DIAGRAMS 5 5 L3d 1 SOT-353/SC70-5/SC-88A DF SUFFIX CASE 419A 1 d = Date Code 5 B 5 1 A 2 GND 3 5 VCC L3 D 1 SOT-553 XV5 SUFFIX CASE 463B 4 L3 D Y 1 = Device Marking = One Digit Date Code PIN ASSIGNMENT Figure 1. Pinout (Top View) A B 1 Y Figure 2. Logic Symbol Pin Function 1 A 2 B 3 GND 4 Y 5 VCC FUNCTION TABLE Output Y=AB Input A B Y L L H L H L H L L H H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Semiconductor Components Industries, LLC, 2003 February, 2003 - Rev. 2 1 Publication Order Number: NL17SZ02/D NL17SZ02 MAXIMUM RATINGS Symbol Parameter Value Unit VCC DC Supply Voltage 0.5 to 7.0 V VIN DC Input Voltage 0.5 to 7.0 V VOUT DC Output Voltage 0.5 to VCC + 0.5 V IIK DC Input Diode Current 50 mA IOK DC Output Diode Current 50 mA IOUT DC Output Sink Current 50 mA ICC DC Supply Current per Supply Pin 100 mA TSTG Storage Temperature Range 65 to 150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 °C TJ Junction Temperature Under Bias JA Thermal Resistance PD Power Dissipation in Still Air at 85°C MSL Moisture Sensitivity FR Flammability Rating ESD ESD Classification 150 °C SOT- 353 (Note 1) SOT- 553 350 496 °C/W SOT- 353 SOT- 553 186 135 mW Level 1 Oxygen Index: 28 to 34 UL 94 V-0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Class Z Class A N/A Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum-rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2-ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A, rated to EIA/JESD22-A114-B. 3. Tested to EIA/JESD22-A115-A, rated to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC DC Supply Voltage VIN DC Input Voltage VOUT DC Output Voltage TA Operating Temperature Range tr, tf Input Rise and Fall Time VCC = 3.0 V 0.3 V VCC = 5.0 V 0.5 V http://onsemi.com 2 Min Max Unit 1.65 5.5 V 0 5.5 V 0 VCC + 0.5 V 40 85 °C 0 0 100 20 ns/V NL17SZ02 DC ELECTRICAL CHARACTERISTICS Symbol Parameter Condition 40C TA 85C TA = 25C VCC (V) Min 0.75 VCC 0.7 VCC VIH High-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VIL Low-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VOH High-Level Output Voltage VIN = VIL or VIH IOH = 100 A IOH = -3 mA IOH = -8 mA IOH = -12 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 VOL Low-Level Output Voltage VIN = VIH or VOH IOL = 100 A IOL = 3 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 IIN Input Leakage Current VIN = VCC or GND ICC Quiescent Supply Current VIN = VCC or GND Typ Max Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 Max VCC 1.52 2.1 2.4 2.7 2.5 4.0 Unit V 0.25 VCC 0.3 VCC VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 V V 0.1 0.24 0.3 0.4 0.4 0.55 0.55 0.1 0.24 0.3 0.4 0.4 0.55 0.55 V 0 to 5.5 0.1 1.0 A 5.5 1 10 A 0.08 0.20 0.22 0.28 0.38 0.42 AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns VCC Symbol tPLH tPHL Condition Min Typ Max Min Max Unit RL = 1 M CL = 15 pF 1.65 2.0 5.3 11.5 2.0 12.0 ns RL = 1 M CL = 15 pF 1.8 2.0 4.4 9.5 2.0 10.0 RL = 1 M CL = 15 pF 2.5 0.2 0.8 2.9 6.5 0.8 7.0 RL = 1 M CL = 15 pF 3.3 0.3 0.5 2.3 4.5 0.5 4.7 1.5 2.9 5.0 1.5 5.2 0.5 1.9 3.9 0.5 4.1 0.8 2.4 4.3 0.8 4.5 Parameter Propagation Delay (Fi (Figure 3 and d 4)) 40C TA 85C TA = 25C (V) RL = 500 CL = 50 pF RL = 1 M CL = 15 pF 5.0 0.5 RL = 500 CL = 50 pF CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCC = 5.5 V, VI = 0 V or VCC 4 pF CPD Power Dissipation Capacitance ( (Note 5)) 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 30 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. http://onsemi.com 3 NL17SZ02 tf = 3 ns tf = 3 ns 90% INPUT A and B VCC 90% 50% 50% INPUT 10% 10% tPHL OUTPUT GND RL tPLH CL VOH OUTPUT Y 50% 50% A 1- MHz square input wave is recommended for propagation delay tests. VOL Figure 3. Switching Waveform Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device Nomenclature Logic Circuit Indicator No. of Gates per Package Temp Range Identifier NL17SZ02DFT2 NL 1 NL17SZ02XV5T2 NL 1 Device Order Number Technology Device Function Package Suffix Tape and Reel Suffix 7 SZ 02 DF 7 SZ 02 XV5 http://onsemi.com 4 Package Type Tape and Reel Size T2 SOT-353/ SC70-5/ SC-88A 178 mm, 3000 Units T2 SOT-553 178 mm 4000 Units NL17SZ02 CAVITY TAPE TOP TAPE TAPE TRAILER (Connected to Reel Hub) NO COMPONENTS 160 mm MIN COMPONENTS TAPE LEADER NO COMPONENTS 400 mm MIN DIRECTION OF FEED Figure 5. Tape Ends for Finished Goods “T2” Pin One Opposing Sprocket Hole (3k Reel) Figure 6. SOT-353/SC70-5/SC-88A Reel Configuration/Orientation “T2” Pin One Opposing Sprocket Hole (4k Reel) Figure 7. SOT-553 XV5T2 Reel Configuration/Orientation http://onsemi.com 5 NL17SZ02 t MAX 1.5 mm MIN (0.06 in) A 13.0 mm 0.2 mm (0.512 in 0.008 in) 50 mm MIN (1.969 in) 20.2 mm MIN (0.795 in) FULL RADIUS G Figure 8. Reel Dimensions REEL DIMENSIONS† Tape Size T and R Suffix A Max G t Max 8 mm T2 178 mm (7 in) 8.4 mm, + 1.5 mm, -0.0 (0.33 in + 0.059 in, -0.00) 14.4 mm (0.56 in) †For additional tape and reel information, refer to Brochure BRD8011/D. DIRECTION OF FEED BARCODE LABEL POCKET Figure 9. Reel Winding Direction http://onsemi.com 6 HOLE NL17SZ02 PACKAGE DIMENSIONS SOT-353 DF SUFFIX 5-LEAD PACKAGE CASE 419A-02 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. A G 5 DIM A B C D G H J K N S 4 -B- S 1 2 3 0.2 (0.008) D 5 PL M B M N J C K H 0.50 0.0197 0.40 0.0157 ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ 1.9 0.0748 ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ http://onsemi.com 7 0.65 0.025 0.65 0.025 mm inches INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC −−− 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC −−− 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NL17SZ02 PACKAGE DIMENSIONS SOT-553 XV5 SUFFIX 5-LEAD PACKAGE CASE 463B-01 ISSUE O A -X- 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. C K 4 1 2 B -Y- 3 D G J 5 PL 0.08 (0.003) DIM A B C D G J K S S M X Y STYLE 1: PIN 1. 2. 3. 4. 5. MILLIMETERS MIN MAX 1.50 1.70 1.10 1.30 0.50 0.60 0.17 0.27 0.50 BSC 0.08 0.18 0.10 0.30 1.50 1.70 BASE 1 EMITTER 1/2 BASE 2 COLLECTOR 2 COLLECTOR 1 INCHES MIN MAX 0.059 0.067 0.043 0.051 0.020 0.024 0.007 0.011 0.020 BSC 0.003 0.007 0.004 0.012 0.059 0.067 STYLE 2: PIN 1. 2. 3. 4. 5. CATHODE ANODE CATHODE CATHODE CATHODE 0.3 0.0118 0.45 0.0177 1.0 0.0394 1.35 0.0531 0.5 0.5 0.0197 0.0197 mm inches ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 NL17SZ02/D