Revised August 2004 FIN1001 3.3V LVDS 1-Bit High Speed Differential Driver General Description Features This single driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350 mV which provides low EMI at ultra low power dissipation even at high frequencies. This device is ideal for high speed transfer of clock or data. ■ Greater than 600Mbs data rate The FIN1001 can be paired with its companion receiver, the FIN1002, or with any other LVDS receiver. ■ Meets or exceeds the TIA/EIA-644 LVDS standard ■ 3.3V power supply operation ■ 0.5ns maximum differential pulse skew ■ 1.5ns maximum propagation delay ■ Low power dissipation ■ Power-Off protection ■ Flow-through pinout simplifies PCB layout ■ 5-Lead SOT23 package saves space Ordering Code: Order Number Package Number Package Description FIN1001M5 MA05B 5-Lead SOT23, JEDEC MO-178, 1.6mm [250 Units on Tape and Reel] FIN1001M5X MA05B 5-Lead SOT23, JEDEC MO-178, 1.6mm [3000 Units on Tape and Reel] Pin Descriptions Pin Name Connection Diagram Description DIN Pin Assignment for SOT23 LVTTL Data Input DOUT+ Non-inverting LVDS Driver Output DOUT− Inverting LVDS Driver Output VCC Power Supply GND Ground NC No Connect Function Table Input Outputs DIN DOUT+ DOUT− L L H H H L H = HIGH Logic Level (Top View) L = LOW Logic Level © 2004 Fairchild Semiconductor Corporation DS500721 www.fairchildsemi.com FIN1001 3.3V LVDS 1-Bit High Speed Differential Driver December 2001 FIN1001 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions −0.5V to +4.6V Supply Voltage (VCC) −0.5V to +6V DC Input Voltage (DIN) DC Output Voltage (DOUT) Driver Short Circuit Current (IOSD) Storage Temperature Range (TSTG) Supply Voltage (VCC) −0.5V to +4.6V 3.0V to 3.6V Input Voltage (VIN) Continuous 0 to VCC −40°C to +85°C Operating Temperature (TA) −65°C to +150°C 150°C Max Junction Temperature (TJ) Lead Temperature (TL) (Soldering, 10 seconds) 260°C ESD (Human Body Model) ≥ 7500V Note 1: The “Absolute Maximum Ratings”: are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specification. ≥ 400V ESD (Machine Model) DC Electrical Characteristics Over supply voltage and operating temperature ranges, unless otherwise specified Symbol Parameter VOD Output Differential Voltage ∆VOD VOD Magnitude Change from Differential LOW-to-HIGH VOS Offset Voltage ∆VOS Offset Magnitude Change from Test Conditions RL = 100 Ω, See Figure 1 Min Typ Max (Note 2) Units 250 350 450 mV 25 mV 1.125 1.25 1.375 V 25 mV ±20 µA Differential LOW-to-HIGH IOFF Power-Off Output Current VCC = 0V, VOUT = 0V or 3.6V IOS Short Circuit Output Current VOUT = 0V VIH Input HIGH Voltage 2.0 VCC V VIL Input LOW Voltage GND 0.8 V −5.5 VOD = 0V ±4 −8 ±8 mA IIN Input Current VIN = 0V or VCC ±20 µA II(OFF) Power-Off Input Current VCC = 0V, VIN = 0V or 3.6V ±20 µA VIK Input Clamp Voltage IIK = −18 mA ICC Power Supply Current No Load, VIN = 0V or VCC 4.5 8 RL = 100 Ω, VIN = 0V or VCC 6.5 10 −1.5 −0.8 V mA CIN Input Capacitance VCC = 3.3V 3.2 pF COUT Output Capacitance VCC = 0V 3.3 pF Note 2: All typical values are at TA = 25°C and with VCC = 3.3V. AC Electrical Characteristics Over supply voltage and operating temperature ranges, unless otherwise specified Symbol tPLHD Parameter Test Conditions Differential Propagation Delay LOW-to-HIGH tPHLD Differential Propagation Delay HIGH-to-LOW RL = 100 Ω, CL = 10pF, Min Typ Max (Note 3) Units 0.5 0.98 1.5 ns 0.5 0.93 1.5 ns tTLHD Differential Output Rise Time (20% to 80%) See Figure 2 and Figure 3 0.4 0.5 1.0 ns tTHLD Differential Output Fall Time (80% to 20%) 0.4 0.5 1.0 ns tSK(P) Pulse Skew |tPLH - tPHL| 0.05 0.5 ns tSK(PP) Part-to-Part Skew (Note 4) 1.0 ns Note 3: All typical values are at TA = 25°C and with VCC = 3.3V. Note 4: tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two devices switching in the same direction (either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with the same supply voltage, same temperature, and have identical test circuits. www.fairchildsemi.com 2 FIN1001 Note A: All input pulses have frequency = 10 MHz, tR or tF = 2 ns Note B: CL includes all probe and fixture capacitances FIGURE 2. Differential Driver Propagation Delay and Transition Time Test Circuit FIGURE 1. Differential Driver DC Test Circuit FIGURE 3. AC Waveforms 3 www.fairchildsemi.com FIN1001 DC / AC Typical Performance Curves FIGURE 4. Output High Voltage vs. Power Supply Voltage FIGURE 5. Output Low Voltage vs. Power Supply Voltage FIGURE 6. Output Short Circuit Current vs. Power Supply Voltage FIGURE 7. Differential Output Voltage vs. Power Supply Voltage FIGURE 8. Differential Output Voltage vs. Load Resistor FIGURE 9. Offset Voltage vs. Power Supply Voltage www.fairchildsemi.com 4 FIN1001 DC / AC Typical Performance Curves (Continued) FIGURE 10. Power Supply Current vs. Frequency FIGURE 11. Power Supply Current vs. Power Supply Voltage FIGURE 12. Power Supply Current vs. Ambient Temperature FIGURE 13. Differential Propagation Delay vs. Power Supply FIGURE 14. Differential Propagation Delay vs. Ambient Temperature FIGURE 15. Differential Pulse Skew (tPLH - tPHL) vs. Power Supply Voltage 5 www.fairchildsemi.com FIN1001 DC / AC Typical Performance Curves FIGURE 16. Differential Pulse Skew (tPLH - tPHL) vs. Ambient Temperature (Continued) FIGURE 17. Transition Time vs. Power Supply Voltage FIGURE 18. Transition Time vs. Ambient Temperature www.fairchildsemi.com 6 FIN1001 3.3V LVDS 1-Bit High Speed Differential Driver Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com