STV300NH02L N-channel 24V - 0.8mΩ - 280A - PowerSO-10 STripFET™ Power MOSFET Features Type VDSS RDS(on) ID STV300NH02L 24V 0.001Ω 280A 10 ■ RDS(on)*Qg industry’s benchmark ■ Conduction losses reduced ■ Low profile, very low parasitic inductance ■ Switching losses reduced 1 PowerSO-10 Applications ■ Switching applications – OR-ing ■ Specially designed and optimized for high efficiency DC/DC converters. Figure 1. Internal schematic diagram Figure 2. Connection diagram (top view) Description This product utilizes the latest advanced design rules of ST’s proprietary STripFET™ technology. This is suitable for high current OR-ing application. Table 1. Device summary Order code Marking Package Packaging STV300NH02L 300NH02L PowerSO-10 Tape & reel September 2007 Rev 2 1/12 www.st.com 12 Content STV300NH02L Content 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 5 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 .............................................. 8 STV300NH02L 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 24 V VDS Drain-source voltage (vgs = 0) VGS Gate-source voltage ± 20 V ID (1) Drain current (continuous) at TC = 25°C 280 A ID (1) Drain current (continuous) at TC = 100°C 200 A Drain current (pulsed) 1120 A Total dissipation at TC = 25°C 300 W 2 W/°C 1.6 J -55 to 175 °C Value Unit Rthj-case Thermal resistance junction-case max 0.5 °C/W Rthj-amb Thermal resistance junction-ambient max 50 °C/W IDM (2) PTOT (3) Derating factor EAS (4) Tstg Tj Single pulse avalanche energy Storage temperature Operating junction temperature 1. This value is limited by package 2. Pulse with limited by safe operating area 3. This value is rated according to Rthj-c 4. Starting Tj = 25°C, ID = 60A, VDD = 20V Table 3. Symbol Thermal data Parameter 3/12 Electrical characteristics 2 STV300NH02L Electrical characteristics (Tcase =25°C unless otherwise specified) Table 4. Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test conditions ID = 1mA, VGS= 0 IDSS VDS = Max rating, Zero gate voltage drain current (VGS = 0) VDS = Max rating, Tc=125°C IGSS Gate body leakage current (VDS = 0) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance Symbol Ciss Coss Crss Qg Min. Typ. 1 VGS= 10V, ID= 80A Unit V 1 10 µA µA ±100 nA 1.5 2 V 0.8 1 mΩ Typ. Max. Unit Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS = 15V, f = 1 MHz, VGS =0 VDD= 12V, ID= 120A, Min. 7055 3251 307 pF pF pF nC nC nC Ω VGS= 10V Qgd Total gate charge Gate-source charge Gate-drain charge (see Figure 15) 109 30 26 RG Gate input resistance VDS = 0V, f = 1 MHz, VGS =0 4.4 Qgs Max. 24 VDS = ± 20V VGS(th) Table 5. 4/12 On /off states STV300NH02L Electrical characteristics Table 6. Switching times Symbol Parameter td(on) tr td(off) tf Table 7. Turn-on delay time Rise time Turn-off delay time Fall time Parameter ISD Source-drain current Source-drain current (pulsed) VSD (1) trr Qrr IRRM trr Qrr IRRM 1. Min. VDD = 12V, ID = 60A RG= 4.7Ω, VGS= 10V, (see Figure 14) VDD = 12V, ID = 60A RG= 4.7Ω, VGS= 10V, (see Figure 14) Typ. Max Unit 18 275 ns ns 138 94.4 ns ns Source drain diode Symbol ISDM Test conditions Test conditions Forward on voltage ISD = 120A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 120A,di/dt = 100A/µs Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 120A,di/dt = 100A/µs VDD = 20V, Tj = 25°C (see Figure 19) VDD = 20V, Tj = 150°C (see Figure 19) Min. Typ. Max. Unit 280 1120 A A 1.3 V 63 85 2.7 ns nC A 63 88 2.8 ns nC A Pulsed: Pulse duration = 300 µs, duty cycle 1.5% 5/12 Electrical characteristics STV300NH02L 2.1 Electrical characteristics (curves) Figure 3. Safe operating area Figure 4. Thermal impedance Figure 5. Output characteristics Figure 6. Transfer characteristics Figure 7. Static drain-source on resistance Figure 8. Normalized BVDSS vs temperature 6/12 STV300NH02L Figure 9. Electrical characteristics Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature Figure 13. Source-drain diode forward characteristics 7/12 Test circuits 3 STV300NH02L Test circuits Figure 14. Switching times test circuit for resistive load Figure 15. Gate charge test circuit Figure 16. Test circuit for inductive load Figure 17. Unclamped inductive load test switching and diode recovery times circuit Figure 18. Unclamped inductive waveform 8/12 Figure 19. Switching time waveform STV300NH02L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data STV300NH02L PowerSO-10 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 3.35 3.65 0.132 0.144 A1 0.00 0.10 0.000 0.004 B 0.40 0.60 0.016 0.024 C 0.35 0.55 0.013 0.022 D 9.40 9.60 0.370 0.378 D1 7.40 7.60 0.291 0.300 e 1.27 0.050 E 9.30 9.50 0.366 0.374 E1 7.20 7.40 0.283 0.291 E2 7.20 7.60 0.283 0.300 E3 6.10 6.35 0.240 0.250 E4 5.90 6.10 0.232 0.240 F 1.25 1.35 0.049 h 0.50 H 13.80 14.40 0.543 L 1.20 1.80 0.047 q 1.70 0.567 0.071 0.067 0o α 0.053 0.002 8o B 0.10 A B 10 = = E4 = = E1 = E3 = E2 = E = = = H 6 = = 1 5 B e 0.25 SEATING PLANE DETAIL "A" A C M Q h D = D1 = = = SEATING PLANE A F A1 A1 L DETAIL "A" α 0068039-C 10/12 STV300NH02L 5 Revision history Revision history Table 8. Revision history Date Revision Changes 08-Feb-2007 1 First release 13-Sep-2007 2 New section has been added: 2.1: Electrical characteristics (curves) 11/12 STV300NH02L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12