ECO-PACTM 1 Fast Recovery Epitaxial Diode (FRED) PSEI 2x61 IFAVM VRRM t rr = 2x 52 A = 1200 V = 40 ns Preliminary Data Sheet VRSM VRRM Type (V) (V) 1200 1200 PSEI 2x61/12 Symbol Test Conditions IFRMS I FAVM* I FRM IFSM TVJ = TVJM ∫ i2 dt TVJ TVJM Tstg VISOL Maximum Ratings 100 A 52 A tP<10µs; rep.rating, pulse widthlimited by TVJM 700 A TVJ = 45 °C t = 10 ms (50 Hz), sine 450 A VR = 0 TC = 50 °C, rectangular, d=0.5 • • • • • 2 independent FRED in 1 package Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop • • • Very short recovery time Soft recovery behaviour Leads suitable for PC board soldering t = 8.3 ms (60 Hz), sine 500 A TVJ = 125 °C t = 10 ms (50 Hz), sine 400 A VR = 0 t = 8.3 ms (60 Hz), sine 440 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1000 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1050 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 800 A²s Applications VR = 0 • t = 8.3 ms (60 Hz), sine 810 A²s -40... + 150 150 °C °C -40... + 150 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque Weight typ. Symbol Test Conditions IR TVJ = 25°C, VR=VRRM TVJ = 25°C, VR=0.8.VRRM TVJ = 125°C, VR=0.8.VRRM max. max. max. 2.2 0.5 14 mA mA mA VF IF = 60 A, TVJ = 150 °C max. 2.15 V TVJ = 25 °C max. 2.50 V VTO rT RthJC RthCH I RM Features (M4) Characteristic Value For power-loss calculations only per diode; max. per diode; typ. IF=60A; -diF/dt=480A/µs; VR=540V 1.65 V 8.3 mΩ 0.7 K/W 0.05 K/W typ. 32 A typ. 40 ns 11.2 11.2 50 mm mm m/s² • • • • • • • UL registered, E 148688 Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight L≤0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=200A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Data according to IEC 60747 refer to a single diode unless otherwise stated *IFAVM rating includes blocking losses at TVJM; VR=0.8 VRRM; duty cycle d=0.5 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 90 12 A 80 µC TVJ= 25°C TVJ=100°C TVJ=150°C 70 IF 60 10 50 6 40 30 4 0 1 VF 2 3 V 40 typ. max. typ. 0 10 4 Fig. 1 Forward current versus voltage drop. 1.0 TVJ=100°C VR=540V µs 1.2 0.8 IRM trr 0.6 800 1000 A/µs Fig. 3 Peak reverse current versus -diF/dt. 60 1200 V ns 50 1000 40 800 tfr 30 600 400 tfr 10 typ. TJ 600 VFR 0.2 40 -diF/dt VFR IF=60A IF=120A IF=60A IF=30A 0.6 400 20 0.2 0 200 0.4 QR 0.4 0 max. 1.0 0.8 0 A/µs 1000 100 -diF/dt Fig. 2 Recovery charge versus -diF/dt. 1.4 0.0 max. IF=60A IF=120A IF=60A IF=30A IRM 2 10 Kf 60 20 20 0 TVJ=100°C VR=540V A IF=60A IF=120A IF=60A IF=30A 8 Qr 80 TVJ=100°C VR= 540V 80 120 °C 160 Fig. 4 Dynamic parameters versus junction temperature. 0.0 0 200 400 600 -diF/dt A/µs 800 1000 Fig. 5 Recovery time versus -diF/dt. 0 TVJ=125°C IF=60A 0 200 400 600 diF/dt 200 0 A/µs 800 1000 Fig. 6 Peak forward voltage versus diF/dt. Package style and outline Dimensions in mm (1mm = 0.0394“) Fig. 7 Transient thermal impedance junction to case. 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20