Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Single Phase Power Line Filter for Frequency Converters FC Series UL Recognized FC Series Specifications • Designed for frequency inverters and variable speed motor drives • Suitable for electronically noisy environments • Protects programmable logic controllers from RF noise on the AC power line • Side flanges for easy mounting • Touch safe terminals provide easy connections and prevent inadvertent contact for safety in the most demanding applications Maximum leakage current each Line to Ground: B suffix no suffix @ 120 VAC 60 Hz: 3.9 mA 3.8 mA @250 VAC 50 Hz: 7.0 mA 6.7 mA Hipot rating (one minute): Line to Ground: Line to Line: 2250 VDC 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 6 to 50A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Ordering Information 36 FC 10 B Suffix B – Single stage Omit for dual stage Input / Output Style 10 – DIN type terminal block Electrical Schematics FC10 LINE LOAD 1 2 FC Series 1 Current Rating 6, 12, 16, 25, 36 or 50A FC10B Available Part Numbers 6FC10 12FC10 16FC10 25FC10 36FC10 50FC10 LINE LOAD 12FC10B 16FC10B 25FC10B 36FC10B 50FC10B 30 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Single Phase Filter for Frequency Converters (continued) FC Series Case Styles Case Dimensions Part No. FC10 / FC10B (6, 12, 16A) A B C D E F 1 12FC10/10B 16FC10/10B 25, 36, 50 FC10/10B 6FC10 D B F E A This hole indicates the "Line" side and may be on either flange. RFI Power Line Filters C FC10 / FC10B (25, 36, 50A ) This hole indicates the "Line" side and may be on either flange. D B C F E A 31 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Single Phase Filter for Frequency Converters (continued) FC Series Performance Data Typical Insertion Loss Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 6FC10 12FC10 16FC10 db 100 db 100 db 100 90 90 90 80 80 80 70 70 70 60 60 60 50 50 50 40 40 40 30 30 30 20 20 20 10 10 0 0.01 0.1 1 0 10 30 Frequency in MHz 10 0.01 0.1 1 0 10 30 Frequency in MHz 0.01 0.1 25FC10 36, 50FC10 12, 16FC10B db 100 db 100 db 100 90 90 90 80 80 80 70 70 70 60 60 60 50 50 50 40 40 40 30 30 30 20 20 20 10 10 0 0.01 0.1 1 0 10 30 Frequency in MHz 0.1 1 0 10 30 Frequency in MHz 0.01 0.1 36FC10B 50FC10B db 100 db 100 db 100 90 90 90 80 80 80 70 70 70 60 60 60 50 50 50 40 40 40 30 30 30 20 20 20 10 10 0 0 0.1 1 10 30 Frequency in MHz 10 30 Frequency in MHz 1 10 30 Frequency in MHz 1 10 30 Frequency in MHz 10 0.01 25FC10B 0.01 1 10 0.01 0.1 1 0 10 30 Frequency in MHz 0.01 0.1 Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 32 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com