2.0x1.25mm SMD CHIP LED LAMP Part Number: APHBM2012PBASURKC ATTENTION Blue Hyper Red OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0mmx1.25mm SMT LED, 0.45mm max. thickness. The Blue source color devices are made with InGaN z Bi -color, low power consumption. on SiC Light Emitting Diode. z Wide viewing angle. The Hyper Red source color devices are made with Al- z Ideal for backlight and indicator. GaInP on GaAs substrate Light Emitting Diode. z Package : 2000pcs / reel. Static electricity and surge damage the LEDS. z Moisture sensitivity level : level 3. It is recommended to use a wrist band or anti-electrostatic z RoHS compliant. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 1 OF 6 ERP: 1203005980 Selection Guide Part No. Dice APHBM2012PBASURKC Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) Min. Typ. 18 50 70 220 WATER CLEAR Hyper Red (AlGaInP) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 650 nm IF=20mA Blue Hyper Red 470 630 nm IF=20mA Spectral Line Half-width Blue Hyper Red 21 28 nm IF=20mA C Capacitance Blue Hyper Red 100 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red 3.2 1.95 4 2.5 V IF=20mA IR Reverse Current Blue Hyper Red 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Units Power dissipation 120 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 100 185 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 2 OF 6 ERP: 1203005980 APHBM2012PBASURKC Blue SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 3 OF 6 ERP: 1203005980 Hyper Red SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 4 OF 6 ERP: 1203005980 APHBM2012PBASURKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 5 OF 6 ERP: 1203005980 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG7624 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu APHBM2012PBASURKC DATE: MAR/26/2009 DRAWN: D.M.Su PAGE: 6 OF 6 ERP: 1203005980