TEMD6010FX01 Vishay Semiconductors Ambient Light Sensor, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released FEATURES • • • • • • • • • • • • 18527 DESCRIPTION TEMD6010FX01 ambient light sensor is a PIN photodiode with high speed and high photo sensitivity in a clear, surface mount plastic package. The detector chip has 0.23 mm2 sensitive area. It is sensitive to visible light much like the human eye and has peak sensitivity at 540 nm. Package type: surface mount Package form: 1206 Dimensions (L x W x H in mm): 4 x 2 x 1.05 Radiant sensitive area (in mm2): 0.23 Product designed and qualified acc. AEC-Q101 for the automotive market High photo sensitivity Adapted to human eye responsivity Supression filter for near infrared radiation Angle of half sensitivity: ϕ = ± 60° Floor life: 72 h, MSL 4, acc. J-STD-020 Lead (Pb)-free reflow soldering Lead (Pb)-free component in accordance RoHS 2002/95/EC and WEEE 2002/96/EC with APPLICATIONS • • • • • • Automotive sensors Ambient light sensors Backlight dimming Mobil phones Notebooks Computers PRODUCT SUMMARY COMPONENT Ira (µA) ϕ (deg) λ0.5 (nm) 1 ± 60 430 to 610 TEMD6010FX01 Note Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM TEMD6010FX01 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel 1206 Note MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL VALUE Reverse voltage TEST CONDITION VR 16 V Power dissipation PV 100 mW Junction temperature UNIT Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C Acc. reflow solder profile fig. 7 Tsd 260 °C Soldered on PCB with pad dimensions: 4 mm x 4 mm RthJA 450 K/W Soldering temperature Thermal resistance junction/ambient Note Tamb = 25 °C, unless otherwise specified Document Number: 81308 Rev. 1.3, 13-Nov-08 For technical questions, contact: [email protected] www.vishay.com 1 TEMD6010FX01 Vishay Semiconductors Ambient Light Sensor, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released BASIC CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. Breakdown voltage IR = 100 µA, E = 0 V(BR) 16 TYP. MAX. UNIT VCE = 5 V, E = 0 Iro 2 30 nA VR = 0 V, f = 1 MHz, E = 0 CD 60 pF VR = 5 V, f = 1 MHz, E = 0 CD 24 pF Ee = 1 mW/cm2, λ = 550 nm, VR = 5 V Ira 1 µA EV = 100 lx, CIE illuminant A, VR = 5 V Ira 0.04 µA EV = 100 lx, CIE illuminant A, VR = 5 V TKIra 0.2 %/K ϕ ± 60 deg Reverse dark current Diode capacitance Reverse light current Temperature coefficient of Ira Angle of half sensitivity Wavelength of peak sensitivity Range of spectral bandwidth V 0.03 λp 540 nm λ0.5 430 to 610 nm Note Tamb = 25 °C, unless otherwise specified BASIC CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 70 CD - Diode Capacitance (pF) Iro - Reverse Dark Current (nA) 1000 100 10 1 VR = 5 V 0.1 0.01 0 50 40 30 20 10 0 20 40 60 80 100 0 20094 Tamb - Ambient Temperature (°C) 18818 E0 = 0 f = 1 MHz 60 Fig. 1 - Reverse Dark Current vs. Ambient Temperature 10 20 30 VR - Reverse Voltage (V) Fig. 3 - Diode Capacitance vs. Reverse Voltage 1 0.1 CIE illuminant A VR = 5 V 0.01 0.001 10 20093 100 1000 10000 EV - Illuminance (lx) Fig. 2 - Reverse Light Current vs. Illuminance www.vishay.com 2 Relative Spectral Sensitivity Ira - Photocurrent (µA) 10 1.0 0.8 Photodiode human eye 0.6 0.4 0.2 0.0 400 20047 600 800 1000 Wavelength (nm) Fig. 4 - Relative Spectral Sensitivity vs. Wavelength For technical questions, contact: [email protected] Document Number: 81308 Rev. 1.3, 13-Nov-08 TEMD6010FX01 Ambient Light Sensor, RoHS Compliant, Vishay Semiconductors Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released 0° 10° DRYPACK 20° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement Srel - Relative Sensitivity 30° 80° 0.6 0.4 0.2 0 Fig. 5 - Relative Radiant Sensitivity vs. Angular Displacement REFLOW SOLDER PROFILE 300 Temperature (°C) FLOOR LIFE Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: Moisture sensitivity: level 4 Floor life: 72 h Conditions: Tamb < 30 °C, RH < 60 % DRYING 94 8318 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 0 0 50 19841 100 150 200 250 300 Time (s) Fig. 6 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D PACKAGE DIMENSIONS in millimeters 18464 Document Number: 81308 Rev. 1.3, 13-Nov-08 For technical questions, contact: [email protected] www.vishay.com 3 TEMD6010FX01 Vishay Semiconductors Ambient Light Sensor, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released BLISTER TAPE DIMENSIONS in millimeters 20877 REEL DIMENSIONS in millimeters Volume: 3000 pcs/reel 20874 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 81308 Rev. 1.3, 13-Nov-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1