AUIRGB4062D1 AUIRGS4062D1 AUIRGSL4062D1 AUTOMOTIVE GRADE INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE C VCES = 600V Features • • • • • • • • • • IC(Nominal) = 24A Low VCE (on) Trench IGBT Technology Low Switching Losses 5μs SCSOA Square RBSOA 100% of The Parts Tested for ILM Positive VCE (on) Temperature Coefficient. Ultra Fast Soft Recovery Co-pak Diode Tighter Distribution of Parameters Lead-Free, RoHS Compliant Automotive Qualified * tSC ≥ 5μs, TJ(max) = 175°C G E VCE(on) typ. = 1.57V n-channel • High Efficiency in a Wide Range of Applications • Suitable for a Wide Range of Switching Frequencies due to Low VCE (ON) and Low Switching Losses • Rugged Transient Performance for Increased Reliability • Excellent Current Sharing in Parallel Operation • Low EMI E C G TO-220AB AUIRGB4062D1 Applications • Air Conditioning Compressor G Gate Ordering Information Base part number Package Type AUIRGB4062D1 AUIRGSL4062D1 AUIRGS4062D1 TO-220 TO-262 D2Pak Standard Pack Form Tube Tube Tube Tape and Reel Left Tape and Reel Right C C C Benefits E C G E G D2Pak AUIRGS4062D1 TO-262 AUIRGSL4062D1 C Collector E Emitter Complete Part Number Quantity 50 50 50 800 800 AUIRGB4062D1 AUIRGSL4062D1 AUIRGS4062D1 AUIRGS4062D1TRL AUIRGS4062D1TRR Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (T A) is 25°C, unless otherwise specified Parameter Max. 600 Collector-to-Emitter Voltage VCES IC @ TC = 25°C Continuous Collector Current IC @ TC = 100°C Continuous Collector Current 39 INOMINAL Nominal Current 24 ICM Pulse Collector Current, VGE = 15V ILM Clamped Inductive Load Current, VGE = 20V IF @ TC = 25°C Diode Continous Forward Current IF @ TC = 100°C IFM Diode Continous Forward Current Diode Maximum Forward Current d 96 VGE Continuous Gate-to-Emitter Voltage ±20 Transient Gate-to-Emitter Voltage ±30 Units V 59 72 c 96 A 59 39 PD @ TC = 25°C Maximum Power Dissipation 246 PD @ TC = 100°C Maximum Power Dissipation 123 TJ Operating Junction and TSTG Storage Temperature Range V W -55 to +175 Soldering Temperature, for 10 sec. (1.6mm from case) Mounting Torque, 6-32 or M3 Screw °C 300 10 lbf·in (1.1N·m) Thermal Resistance RθJC (IGBT) RθJC (Diode) RθCS RθJA Parameter Thermal Resistance Junction-to-Case (IGBT) e Thermal Resistance Junction-to-Case (Diode)e Min. Typ. Max. ––– ––– 0.61 ––– ––– 1.2 Thermal Resistance, Case-to-Sink (flat, greased surface) Thermal Resistance, Junction-to-Ambient ––– 0.50 ––– ––– 62 ––– Units °C/W *Qualification standards can be found at http://www.irf.com/ 1 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Min. Typ. V (BR)CES Collector-to-Emitter Breakdown Voltage Parameter 600 — — ΔV(BR)CES/ΔTJ Temperature Coeff. of Breakdown Voltage — 0.3 — — 1.57 1.77 V CE(on) Collector-to-Emitter Saturation Voltage — 1.87 — — 1.94 — V GE(th) Gate Threshold Voltage 4.0 — 6.5 ΔVGE(th)/ΔTJ Threshold Voltage temp. coefficient — -17 — gfe Forward Transconductance — 12 — S V CE = 50V, IC = 24A, PW = 20μs ICES Collector-to-Emitter Leakage Current — 1.0 25 μA V GE = 0V, V CE = 600V — 3.5 — mA V FM Diode Forward Voltage Drop — 1.57 — — 1.40 — — 1.47 — — — ±100 IGES Gate-to-Emitter Leakage Current Max. Units V Conditions V GE = 0V, IC = 100μA e V/°C V GE = 0V, IC = 10mA (25°C-175°C) IC = 24A, V GE = 15V, TJ = 25°C V IC = 24A, V GE = 15V, TJ = 150°C V V CE = V GE, I C = 700μA IC = 24A, V GE = 15V, TJ = 175°C mV/°C V CE = V GE, I C = 1.0mA (25°C - 175°C) V GE = 0V, V CE = 600V, TJ = 175°C IF = 24A V IF = 19A nA V GE = ±20V IF = 24A, TJ = 175°C Switching Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Min. Typ. — 51 Max. Units Qg Total Gate Charge (turn-on) 77 Qge Gate-to-Emitter Charge (turn-on) — 14 21 Qgc Gate-to-Collector Charge (turn-on) — 21 32 E on Turn-On Switching Loss — 532 754 E off Turn-Off Switching Loss — 311 526 E total Total Switching Loss — 843 1280 td(on) Turn-On delay time — 19 36 tr Rise time — 24 41 td(off) Turn-Off delay time — 90 109 tf Fall time — 23 40 E on Turn-On Switching Loss — 726 — E off Turn-Off Switching Loss — 549 — E total Total Switching Loss — 1275 — td(on) Turn-On delay time — 12 — tr Rise time — 23 — td(off) Turn-Off delay time — 92 — tf Fall time — 84 — Cies Input Capacitance — 1487 — Coes Output Capacitance — 118 — Cres Reverse Transfer Capacitance — 44 — RBSOA Reverse Bias Safe Operating Area FULL SQUARE Conditions IC = 24A nC V GE = 15V V CC = 400V IC = 24A, V CC = 400V, V GE = 15V μJ RG = 10Ω, L = 210μH, TJ = 25°C Energy losses include tail & diode reverse recovery IC = 24A, V CC = 400V, V GE = 15V ns RG = 10Ω, L = 210μH, TJ = 25°C μJ RG=10Ω, L= 210μH,TJ = 175°C IC = 24A, V CC = 400V, V GE=15V e Energy losses include tail & diode reverse recovery IC = 24A, V CC = 400V, V GE = 15V ns RG = 10Ω, L = 200μH, LS = 150nH TJ = 175°C V GE = 0V pF V CC = 30V f = 1.0Mhz TJ = 175°C, IC = 96A V CC = 480V, Vp 600V Rg = 10Ω, V GE = +20V to 0V SCSOA Short Circuit Safe Operating Area Erec V CC = 400V, Vp 600V 5 — — μs Reverse Recovery Energy of the Diode — 773 — μJ TJ = 175°C trr Diode Reverse Recovery Time — 102 — ns V CC = 400V, IF = 24A Irr Peak Reverse Recovery Current — 32 — A V GE = 15V, Rg = 10Ω, L =210μH Rg = 10Ω, V GE = +15V to 0V Notes: VCC = 80% (VCES), VGE = 20V, L = 210μH, RG = 50Ω. Pulse width limited by max. junction temperature. Rθ is measured at TJ of approximately 90°C. Maximum limits are based on statistical sample size characterization. 2 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 70 300 60 250 200 Ptot (W) IC (A) 50 40 30 150 100 20 50 10 0 0 25 50 75 100 125 150 25 175 50 75 100 125 150 175 T C (°C) T C (°C) Fig. 1 - Maximum DC Collector Current vs. Case Temperature Fig. 2 - Power Dissipation vs. Case Temperature 100 1000 10μsec 100μsec 10 100 IC (A) IC (A) 1msec DC 1 10 Tc = 25°C Tj = 175°C Single Pulse 0.1 1 1 10 100 1000 10 100 VCE (V) VCE (V) Fig. 3 - Forward SOA TC = 25°C, TJ ≤ 175°C; VGE =15V Fig. 4 - Reverse Bias SOA TJ = 175°C; VGE = 20V 100 100 VGE = 18V VGE = 15V VGE = 12V VGE = 11V VGE = 10V VGE = 9.0V VGE = 8.0V VGE = 7.0V 60 VGE = 18V VGE = 15V VGE = 12V VGE = 11V VGE = 10V VGE = 9.0V VGE = 8.0V VGE = 7.0V 90 80 70 ICE (A) 80 ICE (A) 1000 40 60 50 40 30 20 20 10 0 0 0 1 2 3 4 5 6 7 8 9 10 VCE (V) Fig. 5 - Typ. IGBT Output Characteristics TJ = -40°C; tp = 20μs 3 www.irf.com © 2013 International Rectifier 0 2 4 6 8 10 VCE (V) Fig. 6 - Typ. IGBT Output Characteristics TJ = 25°C; tp = 20μs May 02, 2013 AUIRGB/S/SL4062D1 100 100 VGE = 18V VGE = 15V VGE = 12V VGE = 11V VGE = 10V VGE = 9.0V VGE = 8.0V VGE = 7.0V 60 80 T J = -40°C T J = 25°C T J =175°C 60 IF (A) ICE (A) 80 40 40 20 20 0 0 0 1 2 3 4 5 6 7 8 9 10 0.0 0.5 1.0 VCE (V) 8 8 6 6 ICE = 12A ICE = 24A ICE = 48A 2 3.0 ICE = 12A ICE = 24A 4 ICE = 48A 0 5 10 15 20 5 10 VGE (V) 15 20 VGE (V) Fig. 10 - Typical VCE vs. VGE TJ = 25°C Fig. 9 - Typical VCE vs. VGE TJ = -40°C 8 IC, Collector-to-Emitter Current (A) 100 ICE = 12A ICE = 24A ICE = 48A 6 VCE (V) 2.5 2 0 4 2 T J = 25°C T J = 175°C 80 60 40 20 0 0 5 10 15 20 VGE (V) Fig. 11 - Typical VCE vs. VGE TJ = 175°C 4 2.0 Fig. 8 - Typ. Diode Forward Characteristics tp = 20μs VCE (V) VCE (V) Fig. 7 - Typ. IGBT Output Characteristics TJ = 175°C; tp = 20μs 4 1.5 VF (V) www.irf.com © 2013 International Rectifier 2 4 6 8 10 12 14 16 VGE, Gate-to-Emitter Voltage (V) Fig. 12 - Typ. Transfer Characteristics VCE = 50V; tp = 20μs May 02, 2013 AUIRGB/S/SL4062D1 2500 1000 2000 tdOFF Swiching Time (ns) EON Energy (μJ) 1500 1000 100 tF tR tdON 10 EOFF 500 0 0 10 20 30 40 1 50 0 10 20 IC (A) Fig. 13 - Typ. Energy Loss vs. IC TJ = 175°C; L = 210μH; VCE = 400V, RG = 10Ω; VGE = 15V 40 50 Fig. 14 - Typ. Switching Time vs. IC TJ = 175°C; L = 210μH; VCE = 400V, RG = 10Ω; VGE = 15V 2000 1000 1600 tdOFF EON Swiching Time (ns) Energy (μJ) 30 IC (A) 1200 EOFF 800 100 tF tR 10 tdON 400 0 0 20 40 60 80 100 1 120 0 20 40 60 80 100 RG (Ω) RG (Ω) Fig. 15 - Typ. Energy Loss vs. RG TJ = 175°C; L = 210μH; VCE = 400V, ICE = 24A; VGE = 15V Fig. 16 - Typ. Switching Time vs. RG TJ = 175°C; L = 210μH; VCE = 400V, ICE = 24A; VGE = 15V 35 35 30 RG = 10Ω 30 RG = 22Ω 25 IRR (A) IRR (A) 25 20 RG = 47Ω 20 15 RG = 100Ω 15 10 5 10 10 15 20 25 30 35 40 45 50 IF (A) Fig. 17 - Typ. Diode IRR vs. IF TJ = 175°C 5 www.irf.com © 2013 International Rectifier 0 20 40 60 80 100 RG (Ω) Fig. 18 - Typ. Diode IRR vs. RG TJ = 175°C May 02, 2013 AUIRGB/S/SL4062D1 6000 35 48A 5000 QRR (nC) IRR (A) 30 25 10Ω 4000 3000 22Ω 47Ω 100Ω 24A 20 2000 12A 1000 15 0 200 400 600 800 1000 200 1200 400 600 diF /dt (A/μs) 2000 1200 Time (μs) RG = 22Ω RG = 47Ω 16 250 12 200 Isc Tsc 8 150 4 100 RG = 100Ω 500 50 0 0 10 20 30 40 8 50 10 12 16 18 Fig. 22 - VGE vs. Short Circuit Time VCC = 400V; TC = 25°C Fig. 21 - Typ. Diode ERR vs. IF TJ = 175°C 16 VGE, Gate-to-Emitter Voltage (V) 10000 Cies Capacitance (pF) 14 VGE (V) IF (A) 1000 Coes 100 Cres 10 V CES = 400V 14 V CES = 300V 12 10 8 6 4 2 0 0 100 200 300 400 500 VCE (V) Fig. 23 - Typ. Capacitance vs. VCE VGE= 0V; f = 1MHz 6 Current (A) Energy (μJ) RG = 10Ω 1000 1000 Fig. 20 - Typ. Diode QRR vs. diF/dt VCC = 400V; VGE = 15V; TJ = 175°C Fig. 19 - Typ. Diode IRR vs. diF/dt VCC = 400V; VGE = 15V; IF = 24A; TJ = 175°C 1500 800 diF /dt (A/μs) www.irf.com © 2013 International Rectifier 0 10 20 30 40 50 60 Q G, Total Gate Charge (nC) Fig. 24 - Typical Gate Charge vs. VGE ICE = 24A; L = 585μH May 02, 2013 AUIRGB/S/SL4062D1 1 Thermal Response ( Z thJC ) D = 0.50 0.1 0.20 0.10 0.05 0.02 0.01 τJ 0.01 SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-006 1E-005 R1 R1 τJ τ1 R2 R2 R3 R3 Ri (°C/W) R4 R4 τC τ τ2 τ1 τ3 τ2 τ4 τ3 τ4 Ci= τi/Ri Ci i/Ri 0.0347 τi (sec) 0.00003 0.1519 0.00007 0.2531 0.00209 0.1721 0.01166 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 25. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT) Thermal Response ( Z thJC ) 10 1 0.1 0.01 0.001 0.0001 1E-006 D = 0.50 0.20 0.10 0.05 0.02 0.01 τJ SINGLE PULSE ( THERMAL RESPONSE ) R1 R1 τJ τ1 R2 R2 R3 R3 Ri (°C/W) R4 R4 τC τ τ2 τ1 τ2 τ3 τ3 Ci= τi/Ri Ci i/Ri τ4 τ4 0.0296 τi (sec) 0.00003 0.4307 0.00028 0.4840 0.00353 0.2576 0.01971 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 1E-005 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 26. Maximum Transient Thermal Impedance, Junction-to-Case (DIODE) 7 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 L L DUT 0 80 V + VCC - 1K DUT VCC Rg Fig.C.T.1 - Gate Charge Circuit (turn-off) Fig.C.T.2 - RBSOA Circuit diode clamp / DUT L 4X DC -5V VCC DUT / DRIVER DUT VCC Rg SCSOA Fig.C.T.3 - S.C. SOA Circuit Fig.C.T.4 - Switching Loss Circuit R= VCC ICM DUT VCC Rg Fig.C.T.5 - Resistive Load Circuit 8 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 600 60 60 600 tr 500 400 40 400 300 30 300 90% ICE 200 100 20 10 5% VCE Eoff Loss -0.05 0.2 -10 0.45 0.7 30 90% / 20 200 100 0 -100 10 10% / 5% VCE 0 0 -100 -0.3 Eon Loss -0.05 time(μs) 0.45 -10 0.7 Fig. WF2 - Typ. Turn-on Loss Waveform @ TJ = 175°C using Fig. CT.4 500 35 500 QRR 28 VCE 400 21 400 tRR 14 300 0 -7 Peak IRR 300 ICE Ice (A) 7 Vce (V) IF (A) 0.2 time (μs) Fig. WF1 - Typ. Turn-off Loss Waveform @ TJ = 175°C using Fig. CT.4 -14 40 TEST CURRENT 10% ICE 0 -0.3 50 ICE (A) 50 VCE (V) 500 ICE (A) VCE (V) tf 200 200 100 100 -21 0 -28 -35 -0.25 0.00 0.25 0.50 0 -100 -100 -2 time (μS) Fig. WF3 - Typ. Diode Recovery Waveform @ TJ = 175°C using Fig. CT.4 9 www.irf.com © 2013 International Rectifier 0 2 4 6 8 Time (uS) Fig. WF4 - Typ. S.C. Waveform @ TJ = 25°C using Fig. CT.3 May 02, 2013 AUIRGB/S/SL4062D1 TO-220AB Package Outline Dimensions are shown in millimeters (inches) TO-220AB Part Marking Information Part Number AUGB4062D1 YWWA IR Logo XX or Date Code Y= Year WW= Work Week A= Automotive, Lead Free XX Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 10 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 D2Pak (TO-263AB) Package Outline Dimensions are shown in millimeters (inches) D2Pak (TO-263AB) Part Marking Information Part Number AUGS4062D1 YWWA IR Logo XX or Date Code Y= Year WW= Work Week A= Automotive, Lead Free XX Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 11 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 TO-262 Package Outline Dimensions are shown in millimeters (inches) TO-262 Part Marking Information Part Number AUGSL4062D1 YWWA IR Logo XX or Date Code Y= Year WW= Work Week A= Automotive, Lead Free XX Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 12 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) FEED DIRECTION 1.85 (.073) 1.65 (.065) 1.60 (.063) 1.50 (.059) 11.60 (.457) 11.40 (.449) 0.368 (.0145) 0.342 (.0135) 15.42 (.609) 15.22 (.601) 24.30 (.957) 23.90 (.941) TRL 10.90 (.429) 10.70 (.421) 1.75 (.069) 1.25 (.049) 4.72 (.136) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 13 www.irf.com © 2013 International Rectifier 60.00 (2.362) MIN. 26.40 (1.039) 24.40 (.961) 3 30.40 (1.197) MAX. 4 May 02, 2013 AUIRGB/S/SL4062D1 † Qualification Information Automotive (per AEC-Q101) Qualification Level Comments: This part number(s) passed Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. 3L-TO-220 Moisture Sensitivity Level N/A 3L-TO-262 3L-D2 PAK Machine Model Human Body Model ESD †† Charged Device Model MSL1 Class M4 (+/- 700V ) (per AEC-Q101-002) Class H1C (+/- 2000V ) (per AEC-Q101-001) Class C5 (+/- 2000V ) (per AEC-Q101-005) Yes RoHS Compliant Qualification standards can be found at International Rectifiers web site: http//www.irf.com/ Highest passing voltage. 14 www.irf.com © 2013 International Rectifier May 02, 2013 AUIRGB/S/SL4062D1 IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245 Tel: (310) 252-7105 15 www.irf.com © 2013 International Rectifier May 02, 2013