SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. APPLICATION 1. This part will terminate up to three 22 AWG tin or silver plated wires. 2. Sleeve will recover to 1.30 (0.051) max. I.D. 3. Temperature rating: 150°C. 4. This drawing forms part of Raychem Specification Control Drawing D-714-00. Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 N/A D010033 If this document is printed it becomes uncontrolled. Check for the latest revision. TITLE : SOLDERSLEEVE, PCB CONNECTOR, 2.16x0.51x6.35 (0.085x0.020x0.250) TERMINAL DOCUMENT NO.: D-129-03 DOC ISSUE: DATE: 1 PROD. REV.: G 08-Feb.-01 SCALE: None SIZE: A SHEET: 1 of 1