Model JK - Honeywell Test and Measurement Sensors

Model JK
Digital Pressure Gauge
DESCRIPTION
The Series JK digital pressure test gauge with 0.2 % full scale
Each unit has a membrane face with raised buttons and tactile
accuracy uses transducer technology and a stainless steel
feedback for setup and operation. The high, low, and clear but-
diaphragm for high overpressure protection. The transducer
tons are easily accessible on this front membrane. Zero adjust-
technology provides enhanced accuracy over the entire pres-
ment and zero offset/tare functions are standard on each unit.
sure range. The JK has no moving parts and thus, may provide
Calibration and setup parameters are stored on a memory chip
a long life with fewer re-calibrations. The stainless steel NEMA
to protect from loss even when power is interrupted. Unauthor-
construction also provides EMI and RFI protection. The JK
ized set ups and calibrations are also blocked with internal
provides high resolution with an easy to read digital display.
security. Various combinations of the front panel buttons can be
There are no operator errors due to interpolation of hash marks
de-activated.
or parallax errors.
The Model JKW is powered by one or two common 9 V alkaline
batteries. The Model JKT is powered by a 110 Vac adapter. The
Model JKV is powered by an 11 Vdc to 32 Vdc power supply.
FEATURES
•
Ranges to 10000 psi
•
0.2 % accuracy
•
Field selectable engineering units
•
Available -18 °C to 82 °C [0 °F to 180 °F] operating temperature4
•
Stainless steel construction
•
4½ digit display with 0.5 in height
•
Customer recalibration
•
9 V battery power
•
High/low capture and store
•
On/off switch
•
CE compliant (certain models, consult factory)
•
Optional carrying case and panel mounting ring
Model JK
PERFORMANCE SPECIFICATIONS
Characteristic
Measure
Range
See additional specifications table
Accuracy
0.2 %1
Update speed
3 per second
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-1 °C to 71 °C [30 °F to 160 °F]
(-18 °C to 82 °C [0 °F to 180 °F] with
optional NEMA 4 rating)
Rating
NEMA 2, std. (NEMA 4 optional except
model JKT)
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Display
LCD, 4 1/2-digit, 1,3 cm [0.5 in] high
Power supply, Model JKW
1 or 2 9-volt batteries (included)
Power supply, Model JKT
110 volt ac adaptor @ 60 Hz (included)
Power supply, Model JKV
11 Vdc to 32 Vdc @ 100 mA
Electrical connection
0,9 m [3 ft] cable (std.) for model JKV
Low battery indication
Standard on model JKW
Calibration data
Stored on memory chip
High and low capture
Standard
ADDITIONAL SPECIFICATIONS
Pressure
range (psi)
1
5
15
30
50
100
200
300
500
Max. safe
over pressure (psi)
10
25
75
150
250
500
1000
1200
1500
Incremental display
steps
0.001
0.005
0.01
0.02
0.05
0.1
0.1
0.2
0.5
Pressure
range (psi)
750
1000
1500
2000
3000
5000
7500
10000
Max. safe
over pressure (psi)
1500
2000
3000
4000
6000
7500
12000
15000
Incremental display
steps
0.5
1
1
1
2
5
5
5
Mounting dimensions and characteristics
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Pressure port
1-4/18 NPT male (300 psi and below)
9/16-18 UNF - 2B female straight thread
with SAE spec J514 o-ring boss (500
psi and above)
Face membrane
Tactile feedback raised buttons
Case material
Stainless steel
Wetted parts
Stainless steel
For reference only
2 Honeywell • Sensing and Control
Model JK
Digital Pressure Gauge
Order guide
JK
* = Example
W 200 G
Z
4
JK*
POWER
W
T
V
= Battery powered (9 V alkaline)*
= 110 Vac adapter (included)
= 11 Vdc to 32 Vdc (3 ft. cable)
PRESSURE RANGE (PSI)
1
5
15
30
50
100
=
=
=
=
=
=
0-1(opt)
0-5(opt)
0-15
0-30
0-50
0-100
200 =
300 =
500 =
750 =
1K =
1.5K =
0-200*
0-300
0-500
0-750
0-1000
0-1500
2K =
3K =
5K =
7.5K =
10K =
0-2000
0-3000
0-5000
0-7500
0-10000
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
REFERENCE
G
A
V
C
=
=
=
=
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
Gage (std) reads zero at atmosphere *
Absolute (opt) reads zero at vacuum (15 psi or higher)
Vacuum (opt)
Compound (opt) reads both positive & negative
(vacuum) pressure
ELECTRICAL CONNECTION
Z = No electrical connection (Model JKW - 9 volt battery)*
C = 3 foot cable (Model JKV)
T = ac adapter (Model JKT)
Call factory for availability of other electrical connections and cable lengths.
OPTIONAL
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to [email protected]
WARNING
4 = NEMA 4 (Not available on JKT)
PERSONAL INJURY
FIELD SELECTABLE STANDARD UNITS OF MEASURE
•DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
NEMA 4 option also provides temperature range of 0-180°F
Each gauge has the following scaling built in for field selection:
Bar
mBar
kPa
MPa
= Bar
= Millibar
= Kilopascals
= Megapascals
Ft H20
In H20
In Hg
mmHg
=
=
=
=
Feet of water
Inches of water
Inches of mercury
mm of mercury
Consult factory for other units of measure not listed
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
NOTES
1. Accuracies stated are for best fit straight line for all errors including
linearity, hysteresis and repeatability through zero.
2. Consult factory for optional units of measure.
3. Consult factory for optional electrical connectors and cable lengths.
4. -18 °C to 82 °C [0 °F to 180 °F] operating temperature only with
optional NEMA 4 rating.
•The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008692-1-EN IL50 GLO May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.