SG-BGA-6013 - Ironwood Electronics

GHz BGA Socket - Direct mount, solderless
Top View
Features
Directly mounts to target PCB (needs tooling holes) with hardware.
High speed, reliable Elastomer connection
Minimum real estate required
Compression plate distributes forces evenly
40.225mm
Ball guide prevents over compression of elastomer
Easily removable swivel socket lid
1
Socket Lid: Black anodized Aluminum.
Thickness = 2.5mm.
2
Socket base: Black anodized Aluminum.
Thickness = 5mm.
3
Compression Plate: Black anodized Aluminum.
Thickness = 2.5mm.
4
Elastomer: 40 micron dia gold plated brass
filaments arranged symmetrically in a silicone
rubber (63.5 degree angle).
Thickness = 0.75mm.
5
Compression screw: Clear anodized Aluminum.
Thickness = 5mm, Hex socket = 5mm.
6
Elastomer Guide: Cirlex or equivalent
Thickness = 0.725mm.
7
Ball Guide: Kapton polyimide.
8
Socket base screw: Socket head cap, Alloy steel with
black oxide finish, 0-80 fine thread , 12.7mm long.
9
Socket lid screw: Shoulder screw, 18-8 SS, 0-80 fine
thread.
10
Insulation Plate: FR4/G10, Thickness = 1.59mm.
11
Backing Plate: Black anodized Aluminum.
Thickness = 6.35mm.
A
A
40.225mm
Recommended torque = 18 in-lb./
288 in-oz
4
1
9
3
Assembled
8.25mm +
IC thickness
2
8
7
Side View
(Section AA)
10
6
11
SG-BGA-6013 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: (952) 229-8200
www.ironwoodelectronics.com
Customer's
BGA IC
5
Customer's Target PCB
Status: Released
Drawing: Meghann Fedde
File: SG-BGA-6013 Dwg.mcd
Scale: -
Rev: G
All tolerances: ±0.125mm (unless stated
otherwise). Materials and specifications
are subject to change without notice.
Date: 8/20/01
Modified: 6/15/09, AE
PAGE 1 of 4
Recommended PCB Layout
Top View
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
1.25mm±0.13mm(x4)
Orientation Mark
3.36mm*
31.75mm
1.27mm typ.
1.25mm±0.13mm (x4)
2.54mm
2.99mm
Ø 0.85mm±0.025mm (x2)
Non plated alignment hole
40.225mm±0.125mm(x4)
Socket size
Ø 0.635mmxPAD
5.08mm
Ø 1.61mm±0.05mm (x8)
Non plating mounting hole
2.5mm±0.13mm
2.5mm±0.13mm
18.863mm (x8)
42.725mm±0.125mm (x4)
Backing plate size
Target PCB Recommendations
Total thickness: 2.4mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
NOTE: Steel backing plate may be required based on end user's application
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
Scale: 2:1
SG-BGA-6013 Drawing
Status: Released
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: (952) 229-8200
www.ironwoodelectronics.com
Drawing: Meghann Fedde
Date: 8/20/01
File: SG-BGA-6013 Dwg.mcd
Modified: 6/15/09, AE
Rev: G
PAGE 2 of 4
Compatible BGA Spec
X
D
Detail
Y
e
E
3Øb
Ø0.25 Z X Y
Ø0.10 Z
0.20
DIM
MIN
MAX
2.5
A
DETAIL
0.20 Z
A
A1
Z
4
SG-BGA-6013 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: (952) 229-8200
www.ironwoodelectronics.com
0.7
1
Dimensions are in millimeters.
A1
Interpret dimensions and tolerances per ASME
Y14.5M-1994.
b
2
D
35.0 BSC
3
Dimension b is measured at the maximum
solder ball diameter, parallel to datum plane Z.
E
35.0 BSC
Datum Z (seating plane) is defined by the
spherical crowns of the solder balls.
e
1.27 BSC
4
5
Parallelism measurement shall exclude any
effect of mark on top surface of package.
5
0.2 Z
Status: Released
Scale: -
0.5
0.90
Array 26x26
Rev: G
Drawing: Meghann Fedde
Date: 8/20/01
File: SG-BGA-6013 Dwg.mcd
Modified: 6/15/09, AE
PAGE 3 of 4
2.5mm
2.5mm
1.27mm (x4)
18.863mm±0.025mm (x8)
Top View
42.725mm
5mm
Ø 1.61mm±0.05mm (x8)
7.03mm
Note: Backing plate holes are tapped to accept 0-80 screws.
10mm Sqr.
20mm (x4)
42.725mm
1.59mm
Side View
Insulation Plate
Backing Plate
6.35mm
Description: Insulation Plate and Backing Plate
SG-BGA-6013 Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
11351 Rupp Drive, Suite 400, Burnsville, MN 55337
Tele: (952) 229-8200
www.ironwoodelectronics.com
Status: Released
Scale: -
Rev: G
Drawing: Meghann Fedde
Date: 8/20/01
File: SG-BGA-6013 Dwg.mcd
Modified: 6/15/09, AE
All dimensions are in mm.
All tolerences are +/- 0.125mm.
(Unless stated otherwise)
PAGE 4 of 4