CANNON STANDARD page 1 of 2 PRODUCT SPECIFICATION CAS21069E CA-T CONNECTOR With ACME Screw Thread; Modified 60° Stub, Triple 1.1 Ordering Information CA-T CA06XH20-29SWT- 01-D17-A240-F0 13.) Modification Code F0 = without contacts 12.) Plating A240 = zinc-nickel, iridescent blue without modification A66 (cadmium, olive drab) 11.) Cable Sealing Area D17 = with Univ. Endbell, wire size 14,5 – 16,6mm 10.) Modification Code 01 = metric crimp contacts without additional modification contact plating A36 9.) Coupling Mechanism T = screw thread, modified 60 °stub, triple 8.) Insulator Position W = Insulator position 80° normal position = - (dash) 7.) Contact Type S = Socket 6.) Contact Arrangement 20-29 = Layout 20-29, 17x contact size 15/16 5.) Shell Size 20 4.) Sealing Material H = FKM-Sealing without = CR-Sealing 3.) Class ii) X = environmental (IP69K), with Universal Endbell i) ii 2.) Shell Style 06 = straight plug 1.) Series i.) 02 class X and XL only 20 class X and XL only Style 02 and 20 without endbell and cable clamp ii.) 06 class F-48, ME, PG, X and FH-48, MEH, PGH, XH only 08 class PG, X and PGH, XH only worked on: checked: ZA 04.04.11 ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Standard: DCR Status: Date of DCR: A4242W ZA 24.04.2012 CANNON STANDARD page 2 of 2 PRODUCT SPECIFICATION CAS21069E CA-T CONNECTOR With ACME Screw Thread; Modified 60° Stub, Triple 1.) Series CA-T = CA triple thread connector 2.) Shell Style 00 = wall mount receptacle with 4 through-holes 01 = cable connecting plug, straight 02 = box mount receptacle, 4 through-holes for front panel mounting 06 = plug, straight 08 = plug, 90º version 20 = box mount receptacle for rear wall mounting 3.) Class E = environmental with resilient insulator and endbell with cable clamp and bushing F = environmental with resilient insulator and endbell for flex tube XL = environmental (IP69K) with resilient insulator PCB solder termination; for CA02XL-T and CA20XL-T only ME = environmental with resilient insulator and adapter for metric thread termination PG = environmental with resilient insulator and adapter for PG termination R = environmental with resilient insulator and shortend light-weight endbell with cable clamp X = environmental (IP69K) CA01X-T and CA06X-T to be used with system cable 4.) Sealing and Insulator Material In combination with index H, e.g. XH, insulator and sealing parts made of FKM instead of CR will be used. Material of V-grommet used in Universal Endbell is silicone in any case. 5.) Shell Size 12S (shell size currently not available) 14S 16S (shell size currently not available) 16 (shell size currently not available) 18 (shell size currently not available) 20 22 (shell size currently not available) 24 (shell size currently not available) 28 (shell size currently not available) 32 (shell size currently not available) 36 (shell size currently not available) 6.) Contact Arrangement Layouts and shell rotation acc. to MIL-DTL-5015 and MIL-STD-1651; available layouts see Error! Reference source not found.. 7.) Contact Type P = pin contacts S = socket contacts 8.) Insulator Position Layouts and shell rotation acc. to MIL-DTL-5015 and MIL-STD-1651; possible shell rotation depends on used layout; available layouts and dependable shell rotation see Error! Reference source not found.. 9.) Coupling Mechanism T = screw thread, modified 60 °stub, triple worked on: checked: ZA 04.04.11 ITT Cannon GmbH, D-71384 Weinstadt IMS Vorlage: R&D_06, Ausgabestand: März 2006 Standard: DCR Status: Date of DCR: A4242W ZA 24.04.2012