3.0x1.5mm SMD CHIP LED LAMP APL3015PBC BLUE Features Description !3.0mmx1.5mm SMT LED, 1.4mm THICKNESS. The Blue source color devices are made with InGaN on !LOW POWER CONSUMPTION. SiC Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !INNER LENS TYPE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0332 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 1 OF4 Selection Guide Par t No . Dic e APL3015PBC Iv (mc d ) @ 20 mA L en s Ty p e BLUE (InGaN) Viewin g An g le Mi n . Ty p . 2θ1/2 20 75 70° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy mb o l Par amet er Dev ic e Ty p . λpeak Peak Wavelength Blue λD Dominate Wavelength ∆λ1/2 Un it s Tes t Co n d it io n s 468 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Halfwidth Blue 25 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.65 4.2 V IF=20mA I Reverse Current Blue 10 uA VR = 5V R Max . Absolute Maximum Ratings at TA=25°°C Par amet er Pu r e Gr een Un it s Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Reverse Voltage 5 V Operating Temperature -20°C To +80°C Storage Temperature -30°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0332 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 2 OF4 Blue APL3015PBC SPEC NO: CDA0332 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 3 OF4 APL3015PBC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0332 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/25/2001 DRAWN: M.F.CAI PAGE: 4 OF4