1.6x1.2mm BI-COLOR SMD CHIP LED LAMP APTB1612SURKSGC Description Features !1.6mmx1.2mm !BI SMT LED, 0.65mm THICKNESS. -COLOR,LOW POWER CONSUMPTION. !WIDE !IDEAL HYPER RED/SUPER BRIGHT GREEN The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. The Super Bright Green source color devices are made FOR BACKLIGHT AND INDICATOR. with Gallium Phosphide Green Light Emitting Diode. !VARIOUS !PACKAGE COLORS AND LENS TYPES AVAILABLE. : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0370 APPROVED: J.LU REV NO: V.1 CHECKED: DATE:OCT/25/2001 DRAWN: Y.F.XU PAGE: 1 OF 4 Selection Guide Par t No . Dic e HYPER RED (InGaAlP) APTB1612SURKSGC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT GREEN (GaP) V i ew i n g An g l e Min . Ty p . 80 150 3 12 WATER CLEAR 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red Super Bright Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 565 nm IF=20mA Hyper Red Super Bright Green 630 568 nm IF=20mA Spectral Line Halfwidth Hyper Red Super Bright Green 28 30 nm IF=20mA C Capacitance Hyper Red Super Bright Green 35 15 pF VR=0V;f=1MHz VF Forward Voltage Hyper Red Super Bright Green 1.95 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C Par am et er H y p e r R ed Su p er B r ig h t Gr een Un it s Power dissipation 170 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 185 140 mA 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0370 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 2 OF 4 Hyper Red / Super Bright Green APTB1612SURKSGC SPEC NO: CDA0370 APPROVED: J.LU REV NO: V.1 CHECKED: DATE:OCT/25/2001 DRAWN: Y.F.XU PAGE: 3 OF 4 APTB1612SURKSGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process." Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0370 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN: Y.F.XU PAGE: 4 OF 4