CPC1983YE

CPC1983YE
Normally Open Power SIP Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Input / Output Isolation
Rating
600
0.5
6
4
Units
VP
Arms / ADC

kV
Description
IXYS Integrated Circuits Division and its parent,
IXYS, have combined to bring OptoMOS® technology,
reliability, and compact size to a new family of
high-power Solid State Relays.
As part of this family, the CPC1983YE single-pole
normally open (1-Form-A) Solid State Power Relay
is rated for up to 0.5ADC / 0.5Arms continuous load
current.
Features
•
•
•
•
•
•
•
4000Vrms Input/Output Isolation
Handle Load Currents Up to 0.5A
600VP Blocking Voltage
Power SIP Package
High Reliability
No Moving Parts
Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
The CPC1983YE employs optically coupled MOSFET
technology to provide 4000Vrms of input to output
isolation. The optically coupled outputs, that use
patented OptoMOS architecture, are controlled by a
highly efficient GaAIAs infrared LED.
This combination of low on-resistance and high
load current handling capability makes this relay
suitable for a variety of high performance switching
applications.
Applications
•
•
•
•
•
Industrial Controls
Motor Control
Robotics
Medical Equipment—Patient/Equipment Isolation
Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• IC Equipment
• Home Appliances
The "E" suffix signifies an enhanced isolation voltage.
Approvals
• UL Recognized Component: File E69938
Ordering Information
Part #
CPC1983YE
Description
Power SIP Package (25 per tube)
Switching Characteristics of
Normally Open Devices
Pin Configuration
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-CPC1983YE-R02
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
CPC1983YE
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output 3
ESD Rating, Human Body Model
Operational Temperature
Storage Temperature
1
Ratings
600
5
50
1
150
1600
4000
8
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
kV
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate linearly 3.33 mW / ºC
Derate linearly 16.667 mW / ºC
UL File 69938 is only rated by UL to 2500Vrms.
2
3
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current, Continuous
Peak Load Current
On-Resistance1
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics
Capacitance Input/Output
1
Conditions
Symbol
Min
Typ
Max
Units
IF=5mA, Free air
IF=5mA, t=10ms
IF=5mA, IL=0.5A
IF=0mA, VL=600VP
IL
ILPK
RON
ILEAK
-
3.5
-
0.5
±3
6
1
Arms / ADC
AP

µA
IF=0mA, 50V, f=1MHz
ton
toff
COUT
-
2.2
0.15
41
5
2
-
IL=0.5A
IF=5mA
VR=5V
IF
IF
VF
IR
0.5
0.9
-
1.3
1.2
-
5
1.4
10
mA
mA
V
µA
f=1MHz
CI/O
-
2
-
pF
Conditions
Symbol
Min
Typ
Max
Units
-
RJC
-
1.5
-
°C/W
IF=5mA, VL=10V
ms
pF
Measurement taken within 1 second of on-time.
Thermal Characteristics
Parameter
Thermal Resistance (junction to case)
2
www.ixysic.com
R02
INTEGRATED CIRCUITS DIVISION
CPC1983YE
PERFORMANCE DATA*
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
25
Device Count (N)
20
15
10
5
20
15
10
5
0
0
1.75
1.235 1.240 1.245 1.250 1.255 1.260 1.265
LED Forward Voltage (V)
Typical IF for Switch Operation
(N=50, IL=500mA, TA=25ºC)
15
10
5
0
1.0
1.1
1.2
1.3
1.4
LED Forward Current (mA)
20
15
10
5
1.2
1.8
IF=50mA
IF=20mA
IF=10mA
IF=5mA
3.45 3.55 3.65 3.75
On-Resistance (:)
0
20
40
60
Temperature (ºC)
80
3
2
1.2
1.0
-20
0
20
40
60
Temperature (ºC)
80
10
100
20
30
LED Current (mA)
40
685
695 705 715 725
Blocking Voltage (VP)
735
Typical Turn-Off Time
vs. LED Forward Current
(IL=75mA, TA=25ºC)
0.14
0.12
0.10
0.08
10
20
30
LED Current (mA)
40
50
Typical Turn-Off Time
vs. Temperature
(IL=75mA)
0.18
0.17
2.5
IF=5mA
2.0
1.5
IF=10mA
1.0
0.5
-40
0
50
Typical Turn-On Time
vs. Temperature
(IL=75mA)
3.0
1.4
5
0.06
0
Typical IF for Switch Operation
(IL=300mA)
10
0.16
4
100
0.166
15
675
0
-20
0.138 0.145 0.152 0.159
Turn-Off Time (ms)
Typical Blocking Voltage Distribution
(N=50, IF=0mA, TA=25ºC)
3.85
1
1.6
0.8
-40
3.35
Turn-Off Time (ms)
1.3
1.1
-40
LED Current (mA)
Turn-On Time (ms)
1.4
Turn-On Time (ms)
LED Forward Voltage (V)
1.5
5
5
20
Typical Turn-On Time
vs. LED Forward Current
(IL=75mA, TA=25ºC)
Typical LED Forward Voltage Drop
vs. Temperature
6
10
0
3.25
1.6
15
0.131
0
1.5
20
0
2.50
Device Count (N)
20
2.05
2.20
2.35
Turn-On Time (ms)
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=500mA, TA=25ºC)
25
Device Count (N)
Device Count (N)
25
1.90
Typical Turn-Off Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
25
Turn-Off Time (ms)
Device Count (N)
25
Device Count (N)
30
Typical Turn-On Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
0.16
IF=10mA
0.15
0.14
0.13
IF=5mA
0.12
-20
0
20
40
60
Temperature (ºC)
80
100
0.11
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R02
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1983YE
PERFORMANCE DATA*
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=300mA)
0.6
3.5
3.0
0.2
0.0
-0.2
-0.4
-20
0
20
40
60
Temperature (ºC)
80
100
Typical Blocking Voltage
vs. Temperature
720
700
680
-1
0
1
Load Voltage (V)
2
-20
0
20
40
60
Temperature (ºC)
80
Typical Leakage Current
vs. Temperature
(VL=600V)
0.30
40
-20
0
20
40
60
Temperature (ºC)
80
100
Output Capacitance
vs. Load Voltage
(IF=0mA, f=1MHz, TA=25ºC)
1200
60
0
-40
100
0.35
-40
3
20
660
640
-40
-2
80
Leakage (nA)
Blocking Voltage (VP)
100
740
0.40
0.20
-3
760
0.45
0.25
-0.6
Output Capacitance (pF)
2.5
-40
0.50
Load Current (A)
4.0
Maximum Load Current
vs. Temperature
(IF=5mA)
0.55
0.4
4.5
Load Current (A)
On-Resistance (:)
5.0
Typical Load Current
vs. Load Voltage
(IF=5mA, TA=25ºC)
1000
800
600
400
200
0
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
50
100
150
Load Voltage (V)
200
Energy Rating Curve
6
Load Current (A)
5
4
3
2
1
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R02
INTEGRATED CIRCUITS DIVISION
CPC1983YE
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1983YE
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
CPC1983YE
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R02
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1983YE
MECHANICAL DIMENSIONS
CPC1983YE
21.082±0.381
(0.830±0.015)
PCB Hole Pattern
3.302±0.051
(0.130±0.002)
10.160±0.127
(0.400±0.005)
1.75
(0.069)
7º TYP
4 Places
Pin 1
1.778
(0.070)
0.762±0.076
(0.030±0.003)
2.540±0.127
(0.100±0.005)
4.572±0.127
(0.180±0.005)
10.160±0.127
(0.400±0.005)
5.080±0.127
(0.200±0.005)
1.651±0.102
(0.065±0.004)
5.080
(0.200)
10.160
(0.400)
1.016±0.127
(0.040±0.005)
Pin 1
1.150 DIA. x4
(0.045 DIA. x4)
2.540
(0.100)
0.381±0.013
(0.015±0.0005)
1.778
(0.070)
7º TYP
4 Places
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1983YE-R02
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/17/2012